NI USB-621x User Manual
Full text
Figure
Related documents
Connecting Analog Input Signals ...3-1 Input Modes...3-1 Nonreferenced or Floating Signal Sources...3-3 Differential Inputs ...3-3 Single-Ended Inputs ...3-3 Ground-Referenced
Refer to the table in the Pinout and Signal Descriptions section for more information about I/O configurations for single-ended or differential measurements.... Some examples
To connect reference single-ended voltage signals (RSE) to the USB-6008/6009, connect the positive voltage signal to the desired AI terminal, and the ground signal to a
NI myDAQ provides analog input (AI), analog output (AO), digital input and output (DIO), audio, power supplies, and digital multimeter (DMM) functions in a compact USB device.. Tip
In addition to a USB audio input and Bluetooth ® connection, the AI-101DA also employs a pair of optical digital audio inputs and an analog audio input for traditional audio
Hansson, “Assessing the state-of-practice of model-based engineering in the embedded systems domain,” in ACM/IEEE 17th International Conference on Model Driven Engineering Languages
28 However, on an ad hoc basis, the Comptroller has adopted some fairly narrow views of what constitutes a “direct cost”: STAR 201108182L (Aug. 2011) (“Direct labor costs for cost
CCTV acceptance inspection of sewers shall be generally conducted in accordance with Conduit Inspection Reporting Code of Australia (CIRCA) - WSA 05-2008. In addition, the