TELNET HUAWEI

(1)

Huawei Telnet

Setup

Connect laptop lan cable ke BTS board CMPT port ETH. Set IP address laptop 172.16.16.20

Start >> CMD > telnet 172.16.16.16

Username : system Password : system

HW CBTS>opnday // Untuk mengaktifkan associational inputting

Check List Alarm ( Selain Temp & Humidity) HW CBTS>lst curalm <(brdtp=?bckm_omu/bckm_sig/bckm_clk/bcim/pmu/crdm/cpm/ecm/trm/cmpt_omu/cmpt_sig/ cmpt_clk/cmpt_trs/utrp/tcu/otu/all),optional,default:all> (ENTER) <(brdid=?),optional>(ENTER) <(alarm_level=?critic/major/minor/notice/all),optional,default:all>(ENTER) <(bgn_dt=?),optional,default:2000&1&1>(ENTER) <(bgn_tm=?),optional,default:0&0&0>(ENTER) <(end_dt=?),optional,default:3000&12&31>(ENTER) <(end_tm=?),optional,default:23&59&59>(ENTER) <(alarm_code=?),optional>(ENTER) <(subunit_type=?),optional>(ENTER) <(subunit_no=?),optional>(ENTER)

(2)

<(alarm_descrip=?),optional>(ENTER) ok

HW CBTS>

OccurTime = [2009-10-19 10:10:24],

AlarmType = Alarm, AlarmLevel = Major AlarmItem = [ 96] Access Control Alarm of Equipment Room CardType = CMPT_OMU, CardId = 0

SubUnitType = [255] No Subunit Type, SubUnitId = 255 Details = <NULL>

HW CBTS>

OccurTime = [2009-10-19 10:10:33],

AlarmType = Alarm, AlarmLevel = Major AlarmItem = [110] Air-Condition Alarm

CardType = CMPT_OMU, CardId = 0 SubUnitType = [255] No Subunit Type, SubUnitId = 255 Details = <NULL>

HW CBTS> HW CBTS>

Check Alarm (Temp & Humidity) HW CBTS>dsp cbtsenvpara

<(mtrlgy=?met/imp),optional,default:met>(ENTER)

Humidity = 59%  Pastikan terdetect ada value r Temperature = 29 o_C_{ Pastikan terdetect ada value} HW CBTS> Check Performance HW CBTS>str infotrace <(brdtp=?bckm_omu/bckm_sig/bckm_clk/bcim/crdm/pmu/cpm/ecm/trm/cmpt_omu/cmpt_sig/ cmpt_clk/cmpt_trs/utrp/tcu),mandatory>trm <(brdid=?),mandatory>0 <(item=?),optional>"vswr" <(item=?),optional>"vswr" <(item=?),optional>"rssi" <(item=?),optional>"power"

(3)

VSWR : HW CBTS> [2009-10-19 15:03:12] TRX0 : Sector0 VSWR = 1.1  di bawah 1.3 HW CBTS> [2009-10-19 15:03:12] TRX0 : Sector1 VSWR = 1.1 HW CBTS> [2009-10-19 15:03:12] TRX0 : Sector2 VSWR = 1.1 HW CBTS> [2009-10-19 15:03:13] TRX0 : Sector0 VSWR = 1.1 HW CBTS> [2009-10-19 15:03:13] TRX0 : Sector1 VSWR = 1.1 HW CBTS> [2009-10-19 15:03:13] TRX0 : Sector2 VSWR = 1.1 HW CBTS> [2009-10-19 15:03:16] TRX0 : Sector0 VSWR = 1.1 HW CBTS> RSSI : HW CBTS>

Carrier10 RSSI: Divs Avg = -108.2, Divs Peak = -90.5, Divs Ratio = 0% Carrier11 RSSI: Main Avg = N/A, Main Peak = N/A, Main Ratio = N/A Carrier11 RSSI: Divs Avg = N/A, Divs Peak = N/A, Divs Ratio = N/A Revs pwr: Main = -86.9, Divs = -84.5;

RF AGC gain: Main= 0.0, Divs = 0.0 HW CBTS>

[2009-10-19 15:00:11] TRX0 :

SectorId[0]:

Carrier0 RSSI: Main Avg = -110.3, Main Peak = -96.6, Main Ratio = 0% Carrier0 RSSI: Divs Avg = -110.0, Divs Peak = -96.9, Divs Ratio = 0% Carrier1 RSSI: Main Avg = -110.6, Main Peak = -96.6, Main Ratio = 0% Carrier1 RSSI: Divs Avg = -110.3, Divs Peak = -97.6, Divs Ratio = 0% Carrier2 RSSI: Main Avg = -110.6, Main Peak = -97.4, Main Ratio = 0% Carrier2 RSSI: Divs Avg = -110.1, Divs Peak = -95.5, Divs Ratio = 0% Carrier3 RSSI: Main Avg = N/A, Main Peak = N/A, Main Ratio = N/A Carrier3 RSSI: Divs Avg = N/A, Divs Peak = N/A, Divs Ratio = N/A Revs pwr: Main = -79.8, Divs = -82.4;

(4)

[2009-10-19 15:00:11] TRX0 :

SectorId[1]:

[2009-10-19 15:00:11] TRX0 :

SectorId[2]:

Revs pwr: Main = -79.8, Divs = -82.7; RF AGC gain: Main= 0.0, Divs = 0.0 HW CBTS> Power Transmit : HW CBTS> [2009-10-19 15:06:09] TRX0 : SectorNo: 0

Base Band Power: Carrier0 = 37.6, Carrier1 = 37.6, Carrier2 = 37.7, Carrier3= N/A Digital Power : Carrier0 = 37.6, Carrier1 = 37.6, Carrier2 = 37.7, Carrier3= N/A Attenuation : Carrier0 = 0.0, Carrier1 = 0.0, Carrier2 = 0.0, Carrier3 = 0.0 Sector : 0

(5)

App PD RMS Error = 0.006, Digital Gain Adj = 0.13 Atten Gain Adjust = -2.8, PD IF Gain Adjust = 0.0,

SDFU Input Power = 43.2, SDFU Echo Power = 19.6, HPA Output Power = 42.7 OBS Channel Power = -5.8, OBS AD Power = -18.1, PD RMS Error = 0.006 OBS Gain Adjust = 0.0, OBS Temp Adjust = 0.5, Differ of Power = 0.00 HW CBTS>

[2009-10-19 15:06:09] TRX0 :

SectorNo: 1

Base Band Power: Carrier0 = 37.6, Carrier1 = 37.6, Carrier2 = 37.7, Carrier3 = N/A

Digital Power : Carrier0 = 37.6, Carrier1 = 37.6, Carrier2 = 37.7, Carrier3 = N/A

Attenuation : Carrier0 = 0.0, Carrier1 = 0.0, Carrier2 = 0.0, Carrier3 = 0.0

Sector : 1

Digital Power Sum = 42.4, IF Gain Adjust = -1.0, DDU Gain Adjust = 0.0 App PD RMS Error = 0.006, Digital Gain Adj = 0.08

Atten Gain Adjust = -0.2, PD IF Gain Adjust = 0.0,

SDFU Input Power = 43.3, SDFU Echo Power = 20.5, HPA Output Power = 42.4 OBS Channel Power = -5.7, OBS AD Power = -18.0, PD RMS Error = 0.006 OBS Gain Adjust = 0.0, OBS Temp Adjust = 0.5, Differ of Power = 0.00 HW CBTS>

[2009-10-19 15:06:09] TRX0 :

SectorNo: 2

Base Band Power: Carrier0 = 37.6, Carrier1 = 37.6, Carrier2 = 38.5, Carrier3 = N/A

Digital Power : Carrier0 = 37.6, Carrier1 = 37.6, Carrier2 = 38.5, Carrier3 = N/A

Attenuation : Carrier0 = 0.0, Carrier1 = 0.0, Carrier2 = 0.0, Carrier3 = 0.0

Sector : 2

Digital Power Sum = 42.7, IF Gain Adjust = -1.0, DDU Gain Adjust = 0.0 App PD RMS Error = 0.006, Digital Gain Adj = 0.08

Atten Gain Adjust = -1.4, PD IF Gain Adjust = 0.0,

SDFU Input Power = 42.8, SDFU Echo Power = 21.0, HPA Output Power = 43.0 OBS Channel Power = -6.2, OBS AD Power = -18.6, PD RMS Error = 0.006 OBS Gain Adjust = 0.0, OBS Temp Adjust = 0.5, Differ of Power = -0.01

Check E1 and link status HW CBTS>dsp cbtslnkstat

(6)

<(brdtp=?cmpt/utrp/bcim),mandatory>cmpt <(brdid=?),mandatory>0

<(lnkid=?),optional>(ENTER)

---CMPT Board0 LinkStatus Query report---LinkID : LinkType : FrameFormat : ErrorBitRate : LinkStatus 0 : E1 : MFM : 0.00e+00 : GOOD

1 : E1 : MFM : 0.00e+00 : GOOD 2 : E1 : MFM : invalid value : LOS 3 : E1 : MFM : invalid value : LOS

HW CBTS> Check GPS HW CBTS>dsp cbtsbrdspecstat <(brdtp=?bckm_omu/bckm_sig/bckm_clk/bcim/crdm/pmu/cpm/ecm/trm/cmpt_omu/cmpt_sig/ cmpt_clk/cmpt_trs/utrp),mandatory>cmpt_clk <(brdid=?),mandatory>0 <(mtrlgy=?met/imp),optional>(ENTER)

clk ref source : inbrdref  dipastikan inbrdef receiver module type : Resolution-T

receiver module mode : gps only RM Position Hold status : enable

GPS satellites traced : 8 Memiliki GPS satellites lebih dari 6 GLONASS satellites traced : 0

latitude : S6o3'2"690(6.050747o)

longitude : E105o55'19"838(105.922180o) altitude : 23m(75ft)

pll status : locked  Pastikan dalam posisi LOCKED GMT offset : eastern 07:00

Time system : standard time HW CBTS>

(7)

Check battery (BTS 3606AC) HW CBTS>dsp cbtspmubattpara

<(brdid=?),mandatory>0 Battery Position = Basic Rack

Battery Capacity = 100AH  Sesuaikan dengan hardware battery capacity yang diinstal HW CBTS>

(8)

User name : ATP_acc Pasword : ATP_acc123 IP address : 172.16.16.16

Command yang bisa di eksekusi diantaranya:

command Keterangan

BLK RES block resource UBL RES unblock resource

DSP CBTSENVPARA display temperature dan humidity DSP RES display resource

SAV CBTSCFG save bts configurasi

STR CBTSRESTRC start resource trace, utk pengukuran:1. VSWR 2. Transmit Power

STP CBTSRESTRC

stop resource trace, utk pengukuran: 1. VSWR

2. Transmit Power

STR CBTSRVSMNT star reverse maintenance bts

DSP CBTSBRDSPECSTAT display gps, longitude, latitude, dan _{status PLL GPS} DSP CBTSLNKSTAT display link (E1) BTS

LST ALMLOG display current alarm SET CBTSALMPORT setting alarm

BTSID xxx

Alarm ID Description EMUA port Bolean Port 16001 Rectifier Failure S1 0 Normally Open/Close OFF 16002 Heat Detector Active S2 1 Normally Open/Close OFF 16003 Door Open S3 2 Normally Open/Close OFF 16004 PLN Power Failure S4 3 Normally Open/Close OFF 16005 Smoke Alarm S5 4 Normally Open/Close OFF 16006 AC Alarms S6 5

16007 DC Power To Low S7 6 Normally Open/Close OFF 16008 DC Fan Active S8 7 Normally Open/Close OFF

Sw always on Variable acon Pn = port number Aid = alarm ID

(9)

(10)