0012 Accredited to ISO/IEC 17065:2012 to provide product conformity certification High Wycombe Buckinghamshire HP14 4ND Tel: +44 (0)1494 569700 Fax: +44 (0)1494 569701 E-Mail: enquiries@bmtrada.com Website: www.bmtrada.com
Locations where certification activities covered by the above Accreditation Standard are undertaken
BM TRADA Certification Limited trading as BM TRADA Stocking Lane
High Wycombe Buckinghamshire HP14 4ND United Kingdom
DETAIL OF ACCREDITATION
Product Standard
Fire doors BM TRADA Q-Mark Scheme tested to BS 476:Part 22
or BS EN1634-1
Enhanced security doors BM TRADA Q-Mark Scheme Document PAS 23 and PAS 24
General performance for windows made from timber, PVC-U, aluminium or steel or composite profiles
BM TRADA Q-Mark Scheme Document BS 644, BS 7412, BS 4873, BS 6510
PVC-U extruded profiles used for window & door products.
BS EN 12608:2003
Windows, doors, roof lights or other fenestration products
BM TRADA Certification Energy Rated Product Scheme
Enhanced security windows BM TRADA Q-Mark Scheme Document PAS 24
Insulating glass units BS EN 1279:Parts 2, 3, 5 and 6
Toughened Glass Scheme EN 12150-2 and EN 14179-2
Laminated Glass Scheme EN ISO 12543-2 and EN ISO 12543-3 (EN 14449)
Trussed rafters (excluding trussed girders) BS 5268:Part 3 and BS EN 14250:2004
Machine strength grading of timber EN 519, EN 338 and EN 14081
Visual strength grading BS 4978 and BS 5756
PEFC - Chain of custody of forest based products PEFC INTERNATIONAL STANDARD Requirements for PEFC scheme users
Product Standard
PEFC - Chain of custody of forest based products
(cont’d)
PEFC ST 2002:2013
Based Products – Requirements Chain of Custody of ForestCylinder Locks BM TRADA Q-Mark Scheme Document O86 -
BS EN 1303 and General Vulnerability Assessment
Fire doors BM TRADA Q-Mark Scheme Document for
International Fire Doors (Not UK) - Certification Scheme No 096
Fire doors-installation and maintenance BM TRADA Q –Mark Scheme Documents for Fire Door Installation Scheme (STD 052) and Fire Door
Maintenance Scheme (STD 058)
Fire Stopping Installation BM TRADA Q- Mark Scheme Documents for Fire Stopping Installation Scheme (STD 05B)
Fire resisting doorsets STD 05D - Scheme Technical Document - CE Marking of Fire Resisting Doorsets to EN 16034
Building Insulation Products BMTRADA Q Mark Scheme which includes evaluation against EN 13162, EN1 3163, EN 13164, EN 13165, EN 13166, EN 13167, EN 13168, EN 13169 EN 13170, EN 13171 and BIP-001 for Evaluation of thin
multi-layer reflective Insulation Products by in situ Testing
Installation of following Green Deal measures:
Energy Efficient Glazing and Doors
PAS 2030:2014
Improving the energy efficiency of existing buildings
Specification for installation process, process management and service provision.
Edition 1 - January 2014 PAS 2031:2012
Certification of Energy Efficiency Measure (EEM) installation services
Product Standard
Installation, as a replacement, of a window, rooflight, roof window or door in an existing dwelling.
Installation, as a replacement, of a window, rooflight, roof window or door in an existing building other than a dwelling. This paragraph does not apply to glass which is load bearing or structural or which forms part of glazed curtain walling or a revolving door.
DCLG Conditions of Authorisation 6 June 2012 and
Competent Person Scheme Installation of replacement windows and doors in an existing building in
accordance with the Building Regulations 2010 (as amended)
Food Processing
Category 1 - Raw Meat Category 2 – Raw Poultry
Category 3 – Raw Prepared Products (Meat and Vegetarian)
Category 4 – Raw Fish Products and Preparations Category 5 – Fruit, Vegetables and Nuts
Category 6 – Prepared Fruit, Vegetables and Nuts Category 7 – Dairy, Liquid Egg
Category 10 – Ready meals and sandwiches, ready to Eat desserts
Category 11 – Low / High acid in cans/glass Category 12 – Beverages
Category 14 – Bakery
Category 15 – Dried Foods and Ingredients Category 16 – Confectionary
Category 17 – Cereals and Snacks Category 18 – Oils and Fats
Product Standard Food Packaging Manufacture
- Paper - Plastic
BRC/IoP Global Standard for Packaging and Packaging Materials, Issue 4
END
Accreditation for the purpose of Notified Body Activity taking into account EA2/17
Directive/Regulation Confority Assessment procedure/Module /Article Category of products or individual products Essential requirements:Product specification/ Properties/Standards The Construction Products Regulation (EU) No 305/2011 Annex V- FPC Certification Body (AVCP) System 2+ 97/176/EC
Structural timber products (1/3)
EN 14250:2010 EN 14081-1:2005+A1:2011 EN 14250:2010 Annex V- Product Certification Body (AVCP) System 1 97/176/EC
Structural timber products (1/3)
EN 14374:2004 Annex V- Product Certification Body (AVCP) System 1 97/176/EC
Structural timber products (2/3)
EN 14080:2005 EN 14374:2004 Annex V- Product Certification Body (AVCP) System 1 97/462/EC Wood-based panels (1/2) EN 13986:2004
Accreditation for the purpose of Notified Body Activity taking into account EA2/17 Directive/Regulation Confority Assessment procedure/Module /Article Category of products or individual products Essential requirements:Product specification/ Properties/Standards The Construction Products Regulation (EU) No 305/2011 (cont’d) Annex V- FPC Certification Body (AVCP) System 2+ 97/462/EC Wood-based panels (1/2) EN 13986:2004 Annex V- Product Certification Body (AVCP) System 1 97/462/EC Wood-based panels (2/2) EN 13986:2004 Annex V- Product Certification Body (AVCP) System 1 97/556/EC
External thermal insulation composite systems/kits with rendering (ETICS)(1/1) ETAG 004 Version 08/2011 Annex V- FPC Certification Body (AVCP) System 2+ 97/638/EC
Fasteners for structural timber products (1/1) EN 14545:2008 ETAG 015 Annex V- Product Certification Body (AVCP) System 1 97/808/EC Floorings (2/2) EN 13813:2002 Annex V- FPC Certification Body (AVCP) System 2+ 98/214/EC
Structural metallic products and ancillaries (1/4) EN 10025-1:2004 EN 10088-4:2009 EN 10088-5:2009 EN 10219-1:2006 EN 10340:2007 EN 10340:2007/AC:2008 EN 10343:2009 EN 15048-1:2007 EN 15088:2005
Accreditation for the purpose of Notified Body Activity taking into account EA2/17 Directive/Regulation Confority Assessment procedure/Module /Article Category of products or individual products Essential requirements:Product specification/ Properties/Standards The Construction Products Regulation (EU) No 305/2011 (cont’d) Annex V- FPC Certification Body (AVCP) System 2+ 98/214/EC
Structural metallic products and ancillaries (2/4) EN 1090-1:2009 EN 1090-1:2009+A1:2011 EN 1090-1:2009/AC:2010 Annex V- FPC Certification Body (AVCP) System 2+ 98/214/EC
Structural metallic products and ancillaries (3/4) EN 13479:2004 Annex V- FPC Certification Body (AVCP) System 2+ 98/214/EC
Structural metallic products and ancillaries (4/4) EN 14399-1:2005 Annex V- FPC Certification Body (AVCP) System 2+ 98/598/EC
Aggregates for uses with high safety requirements (2/2) EN 13043:2002 EN 13043:2002/AC:2004 Annex V- FPC Certification Body (AVCP) System 2+ 98/601/EC
Road construction products (1/2)
EN 13108-1:2006 EN 13108-1:2006/AC:2008 EN 13108-2:2006 EN 13108-2:2006/AC:2008 EN 13108-3:2006 EN 13108-3:2006/AC:2008 EN 13108-4:2006 EN 13108-4:2006/AC:2008 EN 13108-5:2006 EN 13108-5:2006/AC:2008
Accreditation for the purpose of Notified Body Activity taking into account EA2/17 Directive/Regulation Confority Assessment procedure/Module /Article Category of products or individual products Essential requirements:Product specification/ Properties/Standards The Construction Products Regulation (EU) No 305/2011 (cont’d) Annex V- FPC Certification Body (AVCP) System 2+ (cont’d) EN 13108-6:2006 EN 13108-6:2006/AC:2008 EN 13108-7:2006 EN 13108-7:2006/AC:2008 Annex V- Product Certification Body (AVCP) System 1 99/92/EC
Light composite wood-based beams and columns (1/1)
ETAG 011 Annex V- Product Certification Body (AVCP) System 1 99/93/EC
Doors, windows, shutters, blinds, gates and related building hardware (1/1) EN 14351-1:2006+A1:2010 Annex V- FPC Certification Body (AVCP) System 2+ 99/470/EC Construction adhesives (1/2) EN 15275:2007 EN 15275:2007/AC:2010 Annex V- Product Certification Body (AVCP) System 1 2000/245/EC
Flat glass, profiled glass and glass-block products (1/6) EN 12150-2:2004 EN 1279-5:2005+A2:2010 EN 14449:2005 EN 14449:2005/AC:2005 Annex V- Product Certification Body (AVCP) System 1 2000/245/EC
Flat glass, profiled glass and glass-block products (1/6) EN 1279-5:2005+A2:2010 Annex V- Product Certification Body (AVCP) System 1 2000/245/EC
Flat glass, profiled glass and glass-block products (4/6)
EN 12150-2:2004
EN 1279-5:2005+A2:2010 EN 14449:2005
Accreditation for the purpose of Notified Body Activity taking into account EA2/17 Directive/Regulation Confority Assessment procedure/Module /Article Category of products or individual products Essential requirements:Product specification/ Properties/Standards The Construction Products Regulation (EU) No 305/2011 (cont’d) Annex V- Product Certification Body (AVCP) System 1 2000/447/EC
Prefabricated wood-based load-bearing stressed skin panels and self-supporting composite lightweight panels (1/6) ETAG 019 Annex V- Product Certification Body (AVCP) System 1 2000/447/EC
Prefabricated wood-based load-bearing stressed skin panels and self-supporting composite lightweight panels (3/6) ETAG 019 Annex V- Product Certification Body (AVCP) System 1 2003/728/EC
Metal frame building kits, concrete frame building kits, prefabricated building units, cold storage room kits and rock-fall protection kits
ETAG 025 Annex V- Product Certification Body (AVCP) System 1 2015/C 226/04
Pedestrian doorsets, industrial, commercial, garage doors and openable windows — Product standard, performance characteristics — Fire resisting and/or smoke control
characteristics EN 16034:2014 As a Technical Assessment Body (TAB) for developing European Assessment Documents
Annex IV –Product Areas 2 Doors, windows, shutters, gates and related building hardware.
4 Thermal insulation products. composite insulating kits / systems.
Accreditation for the purpose of Notified Body Activity taking into account EA2/17 Directive/Regulation Confority Assessment procedure/Module /Article Category of products or individual products Essential requirements:Product specification/ Properties/Standards The Construction Products Regulation (EU) No 305/2011 (cont’d) As a Technical Assessment Body (TAB) for developing European Assessment Documents
Annex IV –Product Areas 13 Structural timber products / elements and ancillaries.
14 Wood based panels and elements
16 Reinforcing and prestressing steel for concrete (and ancillaries). post tensioning kits 20 Structural metallic products and ancillaries. 23 Road construction products.
30 Flat glass, profiled glass and glass block products 33 Fixings
34 Building kits, units, and prefabricated elements. 35 Fire stopping,fire sealing and fire protective products, fire retardant products END
BM TRADA Certification Limited trading as BM TRADA is recorded as issuing UKAS accredited certificates
to organisations in the countries listed below. This list is current at the time of issue of this schedule.
Australia Bahrain Belgium Canada
People’s Republic of China Czech Republic Denmark Estonia
BM TRADA Certification Limited trading as BM TRADA is recorded as issuing UKAS accredited certificates to organisations in the countries listed below. This list is current at the time of issue of this schedule.
Hong Kong India Ireland Italy
Jordan Korea Kuwait Latvia
Lebanon Lithuania Malaysia Netherlands
Norway Pakistan Poland Portugal
Qatar Russian Federation Saudi Arabia Singapore
Spain Sweden Syrian Arab Republic Taiwan
