Table of Contents 1 MAC Address Authentication Configuration Commands 1-1

14  Download (0)

Full text

(1)

Table of Contents

1 MAC Address Authentication Configuration Commands ···1-1 MAC Address Authentication Basic Function Configuration Commands ···1-1 display mac-authentication ···1-1 mac-authentication ···1-4 mac-authentication interface ···1-5 mac-authentication authmode usernameasmacaddress ···1-6 mac-authentication authmode usernamefixed ···1-6 mac-authentication authpassword···1-7 mac-authentication authusername ···1-8 mac-authentication domain ···1-8 mac-authentication timer ···1-9 reset mac-authentication ···1-9 MAC Address Authentication Enhanced Function Configuration Commands···1-10 mac-authentication guest-vlan ···1-10 mac-authentication max-auth-num···1-11 mac-authentication timer guest-vlan-reauth ···1-12

(2)

1

MAC Address Authentication Configuration

Commands

z The configuration of fixed password when setting the user name in MAC address mode for MAC address authentication is added. See mac-authentication authmode usernameasmacaddress.

z The configuration of MAC Address Authentication Enhanced Function is added. See MAC Address Authentication Enhanced Function Configuration Commands.

MAC Address Authentication Basic Function Configuration

Commands

display mac-authentication

Syntax

display mac-authentication [ interface interface-list ]

View

Any view

Parameters

interface interface-list: List of Ethernet ports. You can specify multiple Ethernet ports by providing this argument in the form of interface-list = { interface-type interface-number [ to interface-type

interface-number ] } &<1-10>, where &<1-10> means that you can provide up to 10 port indexes/port

index ranges for this argument.

Description

Use the display mac-authentication command to display information about MAC address authentication.

Examples

# Display the global information about MAC address authentication.

(3)

Offline detect period is 300s Quiet period is 60 second(s).

Server response timeout value is 100s Guest VLAN re-authenticate period is 30s Max allowed user number is 1024

Current user number amounts to 1

Current domain: not configured, use default domain Silent Mac User info:

MAC ADDR From Port Port Index --- On unit 1, 1 silent mac address(es) found. ---

0016-e0be-e201 Ethernet1/0/2 1(vlan:1) --- 1 silent mac address(es) found. ---

Ethernet1/0/1 is link-up

MAC address authentication is Enabled max-auth-num is 256

Guest VLAN is 2

Authenticate success: 1, failed: 0 Current online user number is 1

MAC ADDR Authenticate state AuthIndex 000d-88f8-4e71 MAC_AUTHENTICATOR_SUCCESS 0

……(The following is omitted)

Table 1-1 Description on the fields of the display mac-authentication command

Field Description

Mac address authentication is Enabled MAC address authentication is enabled.

Authentication mode

Username type used in the MAC address authentication:

z UsernameFixed: Uses the fixed username for authentication.

z UsernameAsMacAddress: Uses the MAC address of a user as the username for authentication.

The default is the MAC address (UsernameAsMacAddress).

Fixed password

Meaning of this field varies by the username type for MAC address authentication:

z If the username type is MAC address, this field indicates whether to use a fixed password for authentication. By default, this field is not configured, which means using the MAC address of a user as the password for authentication.

z If the username type is fixed username, this field indicates whether a fixed password is configured. By default, this field is not configured, which means the password is null.

Fixed password Password used in the fixed mode, which is not configured by default.

Offline detect period

Offline detect timer, which sets the time interval to check whether a user goes offline and defaults to 300

(4)

Field Description

Quiet period

Quiet timer sets the quiet period. A switch goes through a quiet period if a user fails to pass the MAC address authentication. The default value is 60 seconds.

Server response timeout value

Server timeout timer, which sets the timeout time for the connection between a switch and the RADIUS server. By default, it is 100 seconds.

Guest VLAN re-authenticate period

Re-authenticate timer, which sets the time interval to reauthenticate the users in the Guest VLAN and defaults to 30 seconds.

Max allowed user number The maximum number of users supported by the switch. It is 1,024 by default.

Current user number amounts to The current number of users

Current domain The current domain. It is not configured by default.

Silent Mac User info

The information about the silent user. When the user fails to pass MAC address authentication because of inputting error user name and password, the switch sets the user to be in quiet state. During quiet period, the switch does not process the authentication request of this user.

Ethernet1/0/1 is link-up The link connected to Ethernet1/0/1 port is up. MAC address authentication is Enabled MAC address authentication is enabled for

Ethernet1/0/1 port.

max-auth-num Maximum number of MAC address authentication users

that the port can accommodate

Guest VLAN Guest VLAN of the port

Authenticate success: 1, failed: 0

Statistics of the MAC address authentications performed on the port, including the numbers of successful and failed authentication operations. Current online user number The number of the users current access the network

through the port

MAC ADDR Peer MAC address

Authenticate state

The state of the users accessing the network through the port, which can be:

z MAC_AUTHENTICATOR_CONNECTING: Connecting

z MAC_AUTHENTICATOR_SUCCESS: Authentication passed

z MAC_AUTHENTICATOR_FAILURE: Fail to pass authentication

z MAC_AUTHENTICATOR_LOGOFF: Offline

AuthIndex Index of the current MAC address with regard to the

(5)

mac-authentication

Syntax

mac-authentication undo mac-authentication

View

System view, Ethernet port view

Parameters

None

Description

Use the mac-authentication command to enable MAC address authentication globally or on the current port.

Use the undo mac-authentication command to disable MAC address authentication globally or on the current port.

By default, MAC address authentication is disabled both globally and on a port.

When being executed in system view, the mac-authentication command enables MAC address authentication globally.

When being executed in Ethernet port view, the mac-authentication command enables MAC address authentication on the current port.

To make the MAC address authentication take effect, you must enable MAC address authentication globally and on the relevant ports.

You can configure MAC address authentication on a port before enabling it globally. However, the configuration will not take effect unless MAC address authentication is enabled globally.

Examples

# Enable MAC address authentication globally.

<Sysname> system-view

System View: return to User View with Ctrl+Z. [Sysname] mac-authentication

MAC-Authentication is enabled globally.

# Enable MAC address authentication on port Ethernet 1/0/1.

[Sysname] interface Ethernet 1/0/1

(6)

mac-authentication interface

Syntax

mac-authentication interface interface-list undo mac-authentication interface interface-list

View

System view

Parameters

interface-list: List of Ethernet ports. You can specify multiple Ethernet ports by providing this argument

in the form of interface-list = { interface-type interface-number [ to interface-type interface-number ] } &<1-10>, where &<1-10> means that you can provide up to 10 port indexes/port index ranges for this argument.

Description

Use the mac-authentication interface command to enable the MAC address authentication for on the specified port(s).

Use the undo mac-authentication interface command to disable the MAC address authentication for the specified port(s).

By default, MAC address authentication is disabled on a port.

z This command is essential for MAC address authentication to work on a port or on particular ports after MAC address authentication is globally enabled.

z You cannot configure the maximum number of dynamic MAC address entries for a port (through the mac-address max-mac-count command) with MAC address authentication enabled. Likewise, you cannot enable the MAC address authentication feature on a port with a limit of dynamic MAC addresses configured.

z If you have enabled MAC address authentication on a port, you cannot add the port to an aggregation group. If a port is already added to an aggregation group, you cannot enable MAC address authentication on the port.

Examples

# Enable MAC address authentication for Ethernet1/0/1 port.

<Sysname> system-view

System View: return to User View with Ctrl+Z.

(7)

mac-authentication authmode usernameasmacaddress

Syntax

mac-authentication authmode usernameasmacaddress [ usernameformat { with-hyphen | without-hyphen } ] { lowercase | uppercase } | fixedpassword password ]

undo mac-authentication authmode usernameasmacaddress [ usernameformat | fixedpassword ]

View

System view

Parameters

usernameformat: Specifies the input format of the username and password.

with-hyphen: Uses hyphened MAC addresses as usernames and passwords, for example, 00-05-e0-1c-02-e3.

without-hyphen: Uses MAC addresses without hyphens as usernames and passwords, for example, 0005e01c02e3.

lowercase: Uses lowercase MAC addresses as usernames and passwords. uppercase: Uses uppercase MAC addresses as usernames and passwords.

fixedpassword password: Specifies the password for MAC address authentication as the specified fixed password instead of user MAC addresses. password is a string of 1 to 63 characters.

Description

Use the mac-authentication authmode usernameasmacaddress command to set the username type for MAC address authentication to MAC address and specify the username format.

Use the undo mac-authentication authmode command to restore the default user name mode. By default, the user name and password in MAC address mode are used for MAC address authentication.

Examples

# Use the user name in MAC address mode for MAC address authentication, requiring hyphened lowercase MAC addresses as the usernames and passwords.

<Sysname> system-view

System View: return to User View with Ctrl+Z.

[Sysname] mac-authentication authmode usernameasmacaddress usernameformat with-hyphen lowercase

mac-authentication authmode usernamefixed

Syntax

mac-authentication authmode usernamefixed undo mac-authentication authmode

(8)

View

System view

Parameters

None

Description

Use the mac-authentication authmode usernamefixed command to set the user name in fixed mode for MAC address authentication.

Use the undo mac-authentication authmode command to restore the default user name mode for MAC address authentication.

By default, the MAC address mode is used.

Examples

# Use the user name in fixed mode for MAC address authentication.

<Sysname> system-view

System View: return to User View with Ctrl+Z. [Sysname] mac-authentication authmode usernamefixed

mac-authentication authpassword

Syntax

mac-authentication authpassword password undo mac-authentication authpassword

View

System view

Parameters

password: Password to be set, a string comprising 1 to 63 characters.

Description

Use the mac-authentication authpassword command to set a password for MAC address authentication when the user name in fixed mode is used.

Use the undo mac-authentication authpassword command to cancel the configured password. By default, no password is configured.

Examples

# Set the password to newmac.

<Sysname> system-view

(9)

mac-authentication authusername

Syntax

mac-authentication authusername username undo mac-authentication authusername

View

System view

Parameters

username: User name used in authentication, a string of 1 to 55 characters.

Description

Use the mac-authentication authusername command to set a user name in fixed mode. Use the undo mac-authentication authusername command to restore the default user name. By default, the user name in fixed mode is “mac”.

Examples

# Set the user name to vipuser in fixed mode.

<Sysname> system-view

System View: return to User View with Ctrl+Z. [Sysname] mac-authentication authusername vipuser

mac-authentication domain

Syntax

mac-authentication domain isp-name undo mac-authentication domain

View

System view

Parameters

isp-name: ISP domain name, a string of 1 to 128 characters. Note that this argument cannot be null and

cannot contain these characters: “/”, “:”, “*”, “?”, “<”, and “>”.

Description

Use the mac-authentication domain command to configure an ISP domain for MAC address authentication.

Use the undo mac-authentication domain command to restore the default ISP domain for MAC address authentication.

By default, no domain for MAC address authentication is configured. Use the “default domain” as the ISP domain name.

(10)

Examples

# Configure the domain for MAC address authentication to be aabbcc.

<Sysname> system-view

System View: return to User View with Ctrl+Z. [Sysname] mac-authentication domain aabbcc

mac-authentication timer

Syntax

mac-authentication timer { offline-detect offline-detect-value | quiet quiet-value | server-timeout

server-timeout-value }

undo mac-authentication timer { offline-detect | quiet | server-timeout }

View

System view

Parameters

offline-detect-value: Offline detect timer (in seconds) setting. This argument ranges from 1 to 65,535

and defaults to 300. The offline detect timer sets the time interval for a switch to test whether a user goes offline.

quiet-value: Quiet timer (in seconds) setting. This argument ranges from 1 to 3,600 and defaults to 60.

After a user fails to pass the authentication performed by a switch, the switch quiets for a specific period (the quiet period) before it authenticates the user again.

server-timeout-value: Server timeout timer setting (in seconds). This argument ranges from 1 to 65,535

and defaults to 100. During authentication, the switch prohibits a user from accessing the network if the connection between the switch and the RADIUS server times out.

Description

Use the mac-authentication timer command to configure the timers used in MAC address authentication.

Use the undo mac-authentication timer command to restore a timer to its default setting. Related commands: display mac-authentication.

Examples

# Set the server timeout timer to 150 seconds.

<Sysname> system-view

System View: return to User View with Ctrl+Z.

[Sysname] mac-authentication timer server-timeout 150

reset mac-authentication

(11)

View

User view

Parameters

interface-list: List of Ethernet ports. You can specify multiple Ethernet ports by providing this argument

in the form of interface-list = { interface-type interface-number [ to interface-type interface-number ] } &<1-10>, where &<1-10> means that you can provide up to 10 port indexes/port index ranges for this argument.

Description

Use the reset mac-authentication command to clear the MAC address authentication statistics. With the interface keyword specified, the command clears the MAC address authentication statistics of the specified port. Without this keyword, the command clears the global MAC address authentication statistics.

Examples

# Clear the MAC address authentication statistics for port Ethernet 1/0/1.

<Sysname> reset mac-authentication statistics interface Ethernet 1/0/1

MAC Address Authentication Enhanced Function Configuration

Commands

mac-authentication guest-vlan

Syntax

mac-authentication guest-vlan vlan-id undo mac-authentication guest-vlan

View

Ethernet port view

Parameters

vlan-id: ID of the guest VLAN configured for the current port. This argument is in the range of 1 to 4,094.

Description

Use the mac-authentication guest-vlan command to configure a guest VLAN for the current port. If the client connected to the port fails in the authentication, the port will be added to the guest VLAN, and thus the users accessing the port can access network resources in the guest VLAN.

Use the undo mac-authentication guest-vlan command to remove the guest VLAN configuration for the port.

No guest VLAN is configured for a port by default.

The system will re-authenticate users in the guest VLAN at the interval configured by the mac-authentication timer guest-vlan-reauth command. If the user of a port passes the authentication, the port will leave the guest VLAN and return to the initial VLAN configured for it.

(12)

z If more than one client are connected to a port, you cannot configure a Guest VLAN for this port.

z When a Guest VLAN is configured for a port, only one MAC address authentication user can access the port. Even if you set the limit on the number of MAC address authentication users to more than one, the configuration does not take effect.

z The undo vlan command cannot be used to remove the VLAN configured as a Guest VLAN. If you want to remove this VLAN, you must remove the Guest VLAN configuration for it. Refer to the VLAN module in this manual for the description on the undo vlan command.

z Only one Guest VLAN can be configured for a port, and the VLAN configured as the Guest VLAN must be an existing VLAN. Otherwise, the Guest VLAN configuration does not take effect. If you want to change the Guest VLAN for a port, you must remove the current Guest VLAN and then configure a new Guest VLAN for this port.

z 802.1x authentication cannot be enabled for a port configured with a Guest VLAN.

z The Guest VLAN function for MAC address authentication does not take effect when port security is enabled.

Related commands: mac-authentication timer guest-vlan-reauth.

Examples

# Configure VLAN 4 as the Guest VLAN for Ethernet 1/0/1.

<Sysname> system-view

System View: return to User View with Ctrl+Z. [Sysname] interface Ethernet 1/0/1

[Sysname-Ethernet1/0/1] mac-authentication guest-vlan 4

mac-authentication max-auth-num

Syntax

mac-authentication max-auth-num user-number undo mac-authentication max-auth-num

View

Ethernet port view

Parameters

user-name: Maximum number of MAC address authentication users allowed to access a port. This

argument is in the range of 1 to 256.

Description

(13)

Use the undo mac-authentication max-auth-num command to restore the maximum number of MAC address authentication users allowed to access the port to the default value.

By default, the maximum number of MAC address authentication users allowed to access a port is 256.

z If both the limit on the number of MAC address authentication users and the limit on the number of users configured in the port security function are configured for a port at the same time, the smaller value of the two configured limits is adopted as the maximum number of MAC address authentication users allowed to access this port. Refer to the Port Security module in this manual for the description on the port security function.

z You cannot configure the maximum number of MAC address authentication users for a port if any user connected to this port is online.

Examples

# Set the maximum number of MAC address authentication users allowed to access Ethernet 1/0/2 to 100.

<Sysname> system-view

System View: return to User View with Ctrl+Z. [Sysname] interface Ethernet 1/0/2

[Sysname-Ethernet1/0/2] mac-authentication max-auth-num 100

mac-authentication timer guest-vlan-reauth

Syntax

mac-authentication timer guest-vlan-reauth interval undo mac-authentication timer guest-vlan-reauth

View

System view

Parameters

interval: Interval at which the switch re-authenticates users in guest VLANs. This argument is in the

range of 1 to 3,600 in seconds.

Description

Use the mac-authentication timer guest-vlan-reauth command to configure the interval at which the switch re-authenticates users in guest VLANs. If the user of a port passes the authentication, the port will leave the guest VLAN and return to the initial VLAN configured for it.

Use the undo mac-authentication timer guest-vlan-reauth command to restore the re-authentication interval to the default value.

(14)

Examples

# Configure the switch to re-authenticate users in Guest VLANs at the interval of 60 seconds.

<Sysname> system-view

System View: return to User View with Ctrl+Z.

Figure

Updating...

References

Related subjects :