• No results found

Manufacture Dan Characterization of Bioplastic Based on Stone Banana Leaves Powder and Carboxymethyl Cellulosa (CMC) Reinforced Gum Arabic Ikhwanuddin *1 , Kurnia Sembiring 2, Syahrul Humaidi2

N/A
N/A
Protected

Academic year: 2020

Share "Manufacture Dan Characterization of Bioplastic Based on Stone Banana Leaves Powder and Carboxymethyl Cellulosa (CMC) Reinforced Gum Arabic Ikhwanuddin *1 , Kurnia Sembiring 2, Syahrul Humaidi2"

Copied!
7
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Table 1. Percentage Of Bioplastic Based On Stone
Figure 1. Test result physical properties (density and
Figure 2. Test result biodegradability of bioplastic
Figure 4. Thermal analysis (DSC) of bioplastic stone

References

Related documents

Four key findings emerged from the data of this study: First, elementary educators do not perceive that Aboriginal parents have a strong professional

The legal framework for the handling of learner misconduct in South Africa is the Constitution with its Bill of Human Rights, the South African Schools Act

Keywords: dapped-end beam, hanger reinforcement, diagonal reinforcement, ECC, failure load, final deflection, crack pattern, failure mode.. © The

Airborne magnetic data were filtered to determine magnetic and heat source depth information of the Soutpansberg Basin in South Africa.. The Soutpans- berg Basin is located in

This text, which is here iublished for the first time, is one of the most important astronomical inscriptions that has yet been recovered, for it throws

Findings of this study indicated an overall significant effect on students’ academic achievement, F (5,1176) = 40.442, p = 0.001, adjusted R 2 = 0.14 with all the

Using an atlas [44] to find the initial seeds for the fiber bundles, the proposed method overcomes limitations of the semi-automatic methods that suffer from limited

their next written assignment (Appendix C) and also in subsequent debates or oral reports. Because students’ acquisition of knowledge is directly related to students’ needs in