• No results found

Design and Implementation of Adaptive PID based UAV Shaft Position Control

N/A
N/A
Protected

Academic year: 2020

Share "Design and Implementation of Adaptive PID based UAV Shaft Position Control"

Copied!
5
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Fig. 1: An Adaptive Control System [10]
Fig. 2: Unmanned Aerial Vehicle for Surveillance Applications
Fig. 3: Block Diagram of the Proposed Design
Fig. 6: Block Diagram of the LabVIEW VI Designed to View the Response of the Designed System

References

Related documents

The Handbook describes the following procedures in the project: documentation management, repository management, project communication mechanisms, project management,

• Faculty member for the University of Chicago Physical Therapy Orthopedic Residency Program. • APTA credentialed

A mathematical model of an elastomeric bearing in the axial direction is presented in Figure 5, which captures the following characteristics in the axial

First pressure surge is analysed with a fluid dynamic code for different fluid dynamic boundary conditions which are the test conditions during two different

The energy levels of the push-pull linker were finely tuned to align with those of a fullerene acceptor to eventually, when integrated within a COF structure,

2003 CITY COUNCIL OF ROESELARE - AWARD RENOVATION – NEWLY BUILT Building of a shop “Massimo Dutti” and apartments in Roeselare Euro-Pa-Invest NV. LAUREATE CATEGORY

In Austria’s established regions, the probability of raccoon presence was best predicted by variables chosen by an expert of the raccoon’s native range, while the predictors chosen

The comparison between LV and BM approach has been thoroughly studied in these references [15,16] where it is shown that for charm quark the results that one gets using