User s Guide. High Power Wireless-N 600mW Smart Repeater SR10000
Full text
Related documents
Router.. Place the High Power Router in a higher location near the center of your desired coverage location. Position the antennas on the High Power Router in opposite orientations.
Try to reboot (unplug the power from the Smart Repeater and plug it back in) the Smart Repeater and check to see if the connection is established (some networks may be very slow
The Network Setup section changes the settings on the network connected to the Router’s Ethernet ports.. Wireless Setup is performed through the
To configure the wireless network, you can either manually specify your network name (SSID) and your wireless security settings (see “Setting Your SSID and Wireless Security
To configure the wireless network, you can either manually specify your network name (SSID) and your wireless security settings (see “Setting Your SSID and Wireless Security” on
To configure the wireless network, you can either manually specify your network name (SSID) and your wireless security settings (see “Setting Your SSIDs and Wireless
To configure the wireless network, you can either manually specify your network name (SSID) and your wireless security settings (see “Setting Your SSID and Wireless Security
Any changes to the SSID, security, or channel number from the original settings will disconnect the Dual Band Repeater’s connection to the home network To solve this simply run