CISCO IOS IPsec ACCOUNTING WITH CISCO IOS NETFLOW
Full text
Figure
Related documents
• Configuring Advanced PIX™ Firewall Features • Configuring a Cisco Perimeter Router • Configuring Cisco Secure Integrated Software • Understanding Cisco IOS IPSec Support
RP/0/RP0/CPU0:router(config)# flow monitor-map fmm1 RP/0/RP0/CPU0:router(config-fmm)# record ipv4 RP/0/RP0/CPU0:router(config-fmm)# exporter fem1
Analyze an FTP DoS Attack Using the show ip cache verbose flow command Example 191 Analyze an FTP DoS Attack Using NetFlow Dynamic Top Talkers CLI Example 193 Configuring
To configure NetFlow Export capabilities, the user simply needs to specify the IP address and application port number of the Cisco NetFlow FlowCollector (a device that
Cisco IOS NetFlow supports capacity planning, network protection against denial of service (DoS) attacks, and other forms of undesirable traffic and provides new information
The user-defined flow records and the component structure of Flexible NetFlow make it easy for you to create various configurations for traffic analysis and data export on a
• NetFlow MIB cannot be used to retrieve all Flow information, but is very useful for security monitoring and locations where export is not possible. Packet
Also, part of the Flow Monitor is the Flow Exporter which contains information about the export of NetFlow information including the destination address of the NetFlow collector..