Dry construction compounds

(1)

1

Dry construction

(2)

At present we offer a wide assortment of

pro-ducts which ﬁ nd use in the applications of

mo-dern methods used for ﬂ at, civil and industrial

constructions. We have built a high quality

ne-twork of commercial representation,

applicati-on companies, dealers and capplicati-onsultants in the

Czech Republic, as well as abroad. We are

hol-ders of the ISO 9001 certiﬁ cate.

The registered capital

of the company

is CZK 5,000,000.

Full time employees: 50

Ing. Oldřich Fiala

Director of the Company

WWW.MORFICO.CZ Cer tifika Āní spole Ā no st V ýz ku m ný ústav pozemních s tave b ISO 9001

Company

Introduction

Company

Introduction

MFC – MORFICO s.r.o. was founded in 1991 as

a construction company specializing in the

treat-ment of industrial concrete ﬂ oors and areas.

Dur-ing this period of activity we achieved an

impor-tant position on the construction market during the

implementation of new progressive technologies.

The extensive experience acquired from abroad

was applied during the development of our own

materials from domestic raw materials, which are

a guarantee for high quality and productivity. We

gradually transferred from the application of to

the production and sale of construction materials.

Year 2000 – completion of production line for dry cement mixtures. Products are used for surface treatment of concrete areas, they are delivered in paper bags or freely placed.

Year 2002 – expansion of the production program by fresh anhydride screeds which are delivered to the construction sites in car-mixers or on a special application trailer.

Year 2004 – commissioning of a new production line for pro-duction of construction wall parts which represent a sacriﬁ cial framework for load-bearing concrete and, at the same time, are conductors for thermal insulation.

Year 2006 – commencement of production of protective coat-ing substances used for special surface treatment of concrete areas, they are delivered in liquid status and self-levelling coats.

Year 2008 – expansion of services related to deliveries of screeds. Transport of dry mixture to the construction site, mixing of the required volumes of fresh screeds and pumping to the place of destination.

Year 2010 – prefabrication of wall panels from wood-cement shaped units, including assembly of the shell construction. Production of acoustic shaped units, for surface treatment of noise barriers.

Year 2012 – production of special cement binder as the alter-native to anhydrite coats, delivered to the construction by BRE-MAT application vehicles.

Year 2014 – construction of ﬁ lling and distribution centres Brno, Prague, České Budějovice and Hradec Králové, for expansion of services of accessibility of our production.

(3)

Anhydrite binder

MFC Anhydrit 020 screed mixture on the basis of calcium sulphate (anhydrite),

designed for cast levelling (base) layers of ﬂ oors under ﬂ oor covers in civil and apartment constructions. Resistance to pressure min. 20 MPa. Recommended thickness of the layer (depending on the selected composition) 35–65 mm. Cement binder

MFC Portland 020 Cast cement foam designated for the levelling (base) and

insulating layers of ﬂ oors, mainly in residential, civil and industrial objects. Pressure strength min. 20, 25 and 30 MPa. Recommended thickness of layer (depending on the selected composition) 40–75 mm.

Cast foam concrete

MFC Porocem 010 cast cement foam designated for the levelling (base) and

insulating layers of ﬂ oors, mainly in residential, civil and industrial objects. Density 300–800 k/m3_{. Recommended} thickness of layer 40–200 mm. Represents an ideal base under cast anhydrite abd cement coat as the substitution of common board insulations.

Areas of application:

Materials are designed

for levelling layers on

new and old ﬂ oors in

civil and residential

constructions as the

base under the ﬁ nal

surface treatment

(e.g. ﬂ ooring, carpets,

ﬂ oating ﬂ oors, PVC).

MFC Screeds 020

Cast levelling coats

Cast coats are delivered by means of mobile sets (Bremat and TransMix), which enable economic and fast preparation of coat directly in the construction site, including pumping in the place of the placement.

Application vehicle Heating screed MFC Porocem 010 MFC Anhydrite 020 MFC Portland 020 Separation layer

Levelling of the base

Plaster

Side strip

load-bearing construction Heating screed

(4)

Areas of use:

Materials are used for

surface treatment of fresh

concrete ﬂ oors in civil and

industrial areas.

They improve processing,

level and resistance

of the surface to abrasion.

MFC Cobet 100

Dry-shakes,

screeds

Protective coat

load-bearing construction load-bearing construction

MFC Cobet 110 - 140 Impregnation Impregnation load-bearing construction MFC Cobet 150 - 180 adhesive bridge Surface treatment

of the concrete ﬂ oor - coat

Surface treatment of the concrete ﬂ oor with dry-shake

Surface treatment of the concrete ﬂ oor with screed

Dry shake : thickness 2–3 mm

(application by “dry into wet” system)

MFC Cobet 110 (silica) – is used for surface treatment of fresh concrete

ﬂ oors with light operation and lower demands for resistance to abrasion.

MFC Cobet 115 (metalic) – is designed for surface treatment of fresh

concrete ﬂ oors with medium heavy operation and increased demands for resistance to abrasion.

MFC Cobet 120 (corundum) – is used for surface treatment of fresh

concrete ﬂ oors with medium-heavy operation and increased demands for resistance to abrasion.

MFC Cobet 130 (corundum/carbide) – is designed for surface treatment

of fresh concrete ﬂ oors with medium heavy operation and increased demands for resistence to abrasion

MFC Cobet 140 (carbide) – is used for surface treatment of fresh

concrete ﬂ oors with heavy operation and high demands for resistance to abrasion.

Hardness of abrasion resistant ﬁ lled according to Moshe:

(5)

Screeds

MFC Sanfi x 210 professional - is used for fi ne fi lling of holes and cracks concrete

ﬂ oors, it is possible to use it on wooden, stone, ceramic tiles and ﬂ oors. It is used in combination with other MFC levelling materials (MFC Level 300, MFC Final 400). It is applied in one 1–5 mm thick layer within one working step.

MFC Sanfi x 220 standard - is used for fi ne binding of fi lling holes and cracks

concrete ﬂ oors, it is possible to use it on wooden, stone, ceramic tiles and ﬂ oors. It is used in combination with other MFC levelling materials (MFC Level 300, MFC Final 400). It is applied in one 1–10 mm thick layer within one working step.

MFC Sanﬁ x 230 special - is used for levelling of roughness, in particular concrete

surfaces, for fi ne and rough binding of holes and cuts of fl oors, it can also be used for repair of walls, stairs, corners or for creation of a declined layer. It can also be used for wooden, stone, ceramic fl ooring and tiling. It is used in combination with other MFC levelling materials (MFC Level 300, MFC Final 400). It is applied in one 1–50 mm thick layer within one working step.

Mortars

MFC Sanﬁ x 250 waterproof – is used for waterproof material for the protection

of concrete constructions with an absorbent base. It is recommended for vertical and horizontal constructions in interiors and exteriors. This is used prior to the application of rehabilitation mortar and MFC sealing binders.

MFC Sanﬁ x 251 anti-corrosive – is used as a protective coat for reinforcement

of concrete constructions after they have been cleaned of corrosion. At the same time, this plaster is used as an adhesive bridge to ensure adhesion of newly applied layers.

MFC Sanfi x 260 fi lling – is used for repair and re-profi ling of concrete

constructions It is applied in one 5-50 mm thick layer within one working step.

MFC Sanfi x 261 fi nal – is used for thin layer repair and re-profi ling of concrete

constructions It is applied in one 1-5 mm thick layer within one working step.

Areas of use:

Materials are used for

repairs of local chuck

holes and cuts on ﬂ oors,

stairs, walls, corners,

etc. (binders) or as

a protective, ﬁ lling

or ﬁ nal layer of

damaged concrete

constructions (mortars).

MFC Sanﬁ x 200

Repair screeds and mortars

MFC Primer 620 MFC Sanfix 210, 220, 230 MFC Level 300, Final 400

load-bearing construction

Repair system for ferroconcrete constructions Rehabilitation of local

pool holes and cracks

Levelling of the base during reconstruction of wooden ﬂ oors

wooden floor MFC Sanfix 210, 220, 230 MFC Level 340 MFC Primer 620 anti-corrosion coating MFC Sanfix 251

rough filling mortar MFC Sanfix 260

fine final mortar MFC Sanfix 261

(6)

MFC Level 304 smoothing screed – is used for levelling of surfaces and minor roughness, in particular of concrete ﬂ oors and declined areas as the base under ﬂ oor covers. It is applied in one 1–5 mm thick layer within one working step.

MFC Level 305 levelling screed – is used for levelling of surfaces, in particular

of concrete ﬂ oors and declined areas as the base under ﬂ oor covers. It is applied in one 5–30 mm thick layer within one working step .

MFC Level 310 levelling screed – is used for levelling of roughness, in particular

of concrete fl oors as the base layer for the MFC Level 320 self-levelling screed or directly for the fi nal fl oor covering. It is applied in one 5–50 mm thick layer within one working step.

MFC Level 320 base screed – is used for levelling of ﬁ ne roughness, in particular

of concrete surfaces as the base levelling layer under the ﬂ oor covers or as a ﬁ nal surface treatment with a suitable coat for light operation. It is applied in one 2–30 mm thick layer within one working step.

MFC Level 330 base fast-drying screed – is used for levelling of ﬁ ne roughness,

in particular of concrete surfaces as the base fast drying levelling layer under the ﬂ oor covers or as a ﬁ nal surface treatment with a suitable coat for light operation. It is applied in one 2–30 mm thick layer within one working step.

MFC Level 340 screed with spread reinforcement – is used for levelling of mainly

concrete surfaces, wooden fl oors, stone and ceramic fl ooring as a fl exible levelling layer under the fl oor covers. It is applied in one 5–50 mm thick layer within one working step.

MFC Level 350 screed for ﬂ oor heating – is used for levelling of mainly concrete

surfaces, wooden fl oors, stone and ceramic fl ooring as a fl exible levelling layer under the fl oor heating. It is applied in one 2–30 mm thick layer within one working step.

Areas of use:

Materials are used for

levelling layers of new

and old ﬂ oors (concrete,

ceramic, wood) in civil

and ﬂ at constructions as

the base for ﬁ nal surface

treatment (e.g. ﬂ owing,

coating, parquets,

carpets, PVC).

MFC Level 300

Self-levelling

screeds

“Wet into dry” system

concrete base

walking layer walking layer

wooden floor walking layer cement screed thermal insulation electric cables concrete base Levelling of the base under

walking layer

Levelling of the base during reconstruction of wooden ﬂ oors

Levelling of the base with electric ﬂ oor heating

(7)

MFC Final 410 fi nal screed, medium heavy operation - is used for industrial fl oors on new or old concrete as a fi nal surface treatment. It is used for levelling of surfaces affected by strong wearing. It is applied in one 4–15 mm thick layer within one working step.

MFC Final 411 ﬁ nal screed (corundum) - is used for industrial ﬂ oors on new

or old concrete as a ﬁ nal surface treatment. It is used for levelling of surfaces affected by strong wearing and lower demands for resistance to abrasion. It is applied

in one 4–15 mm thick layer within one working step.

MFC Final 412 ﬁ nal screed (corundum/carbide) - is used for industrial ﬂ oors

on new or old concrete as a ﬁ nal surface treatment. It is used for levelling of surfaces affected by strong wearing

and increased demands for resistance to abrasion. It is applied in one 4–15 mm thick layer within one working step.

MFC Final 413 ﬁ nal screed (carbide) - is used for industrial ﬂ oors on new or old

concrete as a ﬁ nal surface treatment. It is used for levelling of surfaces affected by strong wearing and high demands for resistance to abrasion. It is applied in one 4–15 mm thick layer within one working step.

MFC Final 420 base screed, medium-heavy operation – is used for application on

old and damaged concrete bases for rough levelling

and compaction of industrial ﬂ oors before the application of MFC Final 410 – 413 or synthetic screed. It is applied in one 5–30 mm thick layer within one working step.

MFC Final 430 ﬁ nal screed, heavy operation - is used for industrial ﬂ oors on new

or old concrete as a ﬁ nal surface treatment for heavy stressed industrial and concrete areas. It is applied in one 5–15 mm thick layer within one working step.

MFC Final 440 base screed, heavy operation – is used for application on old

and damaged concrete bases for rough levelling and compaction of industrial ﬂ oors before the application of MFC Final 430 or a synthetic screed. It is applied in one 5–30 mm thick layer within one working step.

Areas of use:

Materials are used

for ﬁ nal topping areas

of industrial ﬂ oors as

a ﬁ nal surface treatment

(new and old), in particular

concrete areas with

a high mechanical stress

(e.g. production halls,

garages, warehouses,

supermarkets).

MFC Final 400

Self-levelling industrial screeds

“Wet into dry” system

Final topping of industrial ﬂ oors

Surface treatment with ﬁ nal topping with underlayment screed during reconstruction of industrial ﬂ oors

Levelling of industrial ﬂ oors under synthetic coat

MFC Final 410 – 413, 430 MFC Final 420, 440 MFC Primer 620 MFC Final 410 – 413, 430 MFC Primer 620 MFC Final 420, 440 MFC Primer 620 MFC Primer 620

load-bearing construction load-bearing construction

synthetic coat

(8)

MFC Festic 510 standard adhesive – is used in interiors for sealing of all types of tiling and fl ooring with the exception of stone high sintered fl ooring on traditional fi rm bases (lime-cement and cement plasters, concrete bases, etc.)

MFC Festic 511 professional adhesive used in interiors and exteriors for

sealing all types of tiles and ﬂ ooring (sintered and highly sintered) on traditional solid bases and in environments with increased demands for adhesion with the base.

MFC Festic 512 ﬂ exible adhesive – is used for sealing of all types

of tiles and ﬂ ooring in interiors and exteriors on traditional solid bases in the environment with increased demands for adhesion with the base (smooth concrete ﬂ oors,

plasterboard, terrazzo, wood, asphalt, old tiles and ﬂ ooring).

MFC Festic 512 AE adhesive for calcium sulphate bases designed for (anhydrite)

bases, as well as traditional (concrete) bases.

It can be used for sealing all types of interior ﬂ oorings (sintered and highly sintered).

MFC Festic 513 high ﬂ exible adhesive used in interiors and exteriors for

sealing all types of tiles and ﬂ ooring (sintered and highly sintered) and in environments with increased demands for adhesion with the base. It is recommended for ﬂ oor heating systems and bases with cross deformation.

MFC Festic 520 standard sealing adhesive for thermal insulation – is used for

manual sealing of traditional polystyrene heating boards on ﬁ rm bases (plaster, bricks, concrete plasters). It is frost-proof and recommended for use in interiors and exteriors.

MFC Festic 521 special sealing adhesive for thermal insulation – is used

for sealing of heat-insulation boards made of extruded polystyrene on ﬁ rm bases (plaster, bricks, concrete plasters). It is frost-proof and recommended for the use in interiors and exteriors.

MFC Festic 500

Sealing

adhesives

Areas of use:

Materials are used for

sealing and joining of

tiles, ﬂ ooring

and heating systems,

on various types of

bases in interiors

and exteriors.

MFC Primer 620 MFC Anhydrit 020 (030) MFC Primer 620 load-bearing construction MFC Festic 512 AE walking layer MFC Primer 620 load-bearing construction MFC Festic 510–513 walking layer C1 C1TE C2TE C2TE C2TE-S1 Sealing of tiles and ﬂ ooring on traditional bases

Sealing of ﬂ ooring on anhydrite coats Sealing of polyester heat-insulation boards MFC Primer 620 MFC Festic 520, 521 tepelná izolace MFC Festic 520, 521 armovací tkanina

(9)

Areas of application:

The compounds are

designed for the

preparation of base

layers prior to the

application of further

layers or as ﬁ nal surface

treatment for concrete

and self-levelling coating.

MFC Protect 600

Impregnation, penetration, coating

Surface treatment for ﬁ lled concrete ﬂ oors

Surface treatment with levelling layer for use in reconstructing industrial ﬂ oors

Levelling of industrial ﬂ oors under coating

Impregnating compound (surface area)

MFC Stoplak 610 synthetic solution based on acrylic dispersion. The solution is used to treat both old and new surfaces of levelling MFC materials and standard concrete surfaces.

MFC Ekopox 630 2-K compound based on water epoxy resin dispersion.

The compound is recommended for use as ﬁ nal surface treatment of concrete surfaces and industrial self-levelling layers

from the MFC Final 400 series.

MFC Curol SiT60 is a protective coat preventing water evaporation from the surface of machine smoothed and ﬁ lled industrial ﬂ ooring.

Within 6–8 weeks it efﬁ ciently prevents any cracks originating during the settling and hardening of concrete.

Penetration compounds (base area)

MFC Primer 620 is a concentrated water-borne solution based on acrylic dispersion. The solution is designed to close and ﬁ x foundations from concrete, wood, ceramics, etc. and acts as an adhesive bridge individual levelling layers from MFC materials.

MFC Ekopox 660 2-K compound based on water epoxy resin dispersion. The compound is designed to crose and ﬁ x bases made from concrete, wood, ceramics, etc. and anywhere there are increased requirements for adhesion with the base layer.

MFC Ekopox 661 2-K solvent-free system based on epoxy resin, designed to crose and ﬁ x concrete surfaces. The system can be used as binder for the production of synthetic screeds for rough bases under coatings and synthetic screeds.

Light operation coating compounds

MFC Ekopox 640 2-K compound based on water epoxy resin dispersion. The compound is recommended to be used as ﬁ nal surface treatment on concrete ﬂ oors and industrial self-levelling layers from the MFC Level 300 series.

Special compounds

MFC Ekopox 670 2-K solvent free compound based on low-viscosity epoxy resin. The compound is designed for repairing joints and cracks in anhydrite screed and self-levelling compounds and can also be used to repair uncompacted surfaces and injections of caverns.

MFC Final 420, 440 MFC Primer 620 load-bearing construction synthetic levelling layer MFC impregnation MFC penetration MFC penetration MFC Final 420, 440 MFC Final 410 – 413, 430 load-bearing construction load-bearing construction MFC Cobet 110 - 140 MFC impregnation

(10)

MFC

materials

Thickness of the la

ye

r

min. – max. (mm) _{Consumption la}

yer 1 mm (k g/m 2) Ready t o w alk (hours)

Base recommended for application

Surface treatment

concr et e por ous concr et e w ood st one _PVC _steel fl ooring co vers co at s co ating _layers without sur fac e tr ea tmen t MFC coat s

DRY-SHAKES, SCREEDS

MFC Cobet 110 2 – 3 1,6 24 ✓ ✓ ✓ ✓ MFC Cobet 120 2 – 3 1,6 24 ✓ ✓ ✓ ✓ MFC Cobet 130 2 – 3 1,6 24 ✓ ✓ ✓ ✓ MFC Cobet 140 2 – 3 1,6 24 ✓ ✓ ✓ ✓

REPAIR SCREEDS AND MORTARS

MFC Sanfi x 210 1 – 5 1,7 ✓ ✓ ✓ ✓ ✓ ✓ Level 300 MFC Sanfi x 220 1 – 10 1,7 ✓ ✓ ✓ ✓ ✓ ✓ Level 300 MFC Sanfi x 230 2 – 50 1,7 ✓ ✓ ✓ ✓ ✓ ✓ ✓ Level 300, Final 400

SELF-LEVELLING SCREEDS

MFC Level 304 1 – 5 1,7 1 – 3 ✓ ✓ ✓ ✓ ✓ MFC Level 305 5 – 30 1,7 1 – 3 ✓ ✓ ✓ ✓ ✓ Level 330, 320 MFC Level 310 5 – 50 1,7 1 – 3 ✓ ✓ ✓ ✓ ✓ Level 330, ₃₂₀ MFC Level 320 2 – 30 1,7 1 – 3 ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ MFC Level 330 2 – 30 1,7 1 – 3 ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ MFC Level 340 5 – 50 1,7 1 – 3 ✓ ✓ ✓ ✓ ✓ ✓ ✓ MFC Level 350 2 – 30 1,7 1 – 3 ✓ ✓ ✓ ✓ ✓ ✓ ✓

SELF-LEVELLING INDUSTRIAL SCREEDS

MFC Final 410 4 – 15 1,7 3 – 5 ✓ ✓ ✓ ✓ ✓ ✓ ✓ MFC Final 411 4 – 15 1,7 3 – 5 ✓ ✓ ✓ ✓ ✓ ✓ ✓ MFC Final 412 4 – 15 1,7 3 – 5 ✓ ✓ ✓ ✓ ✓ ✓ ✓ MFC Final 413 4 – 15 1,7 3 – 5 ✓ ✓ ✓ ✓ ✓ ✓ ✓ MFC Final 420 5 – 30 1,8 1 – 3 ✓ ✓ ✓ ✓ ✓ _{410 – 413}Final MFC Final 430 5 – 15 1,9 3 – 5 ✓ ✓ ✓ ✓ ✓ MFC Final 440 5 – 30 1,8 1 – 3 ✓ ✓ ✓ ✓ Final 430

Use

of dry construction

mixtures MFC

Use

of dry construction

mixtures MFC

(11)

(12)

Your authorized dealer