• No results found

SJ4000 Setup Menu Sub Menu Notes

N/A
N/A
Protected

Academic year: 2021

Share "SJ4000 Setup Menu Sub Menu Notes"

Copied!
10
0
0

Loading.... (view fulltext now)

Full text

(1)

Snelle handleiding

SJ4000 Setup Menu

Sub Menu

Notes

Resolution The resolution setup is for

the video recording mode. The default is 1080FHD

1920×1080.1080FHD 1920×1080 is 30fps the rest of the modes are 60fps

Cyclic Record Cyclic Record is for the

video recording

mode. The default mode is Off.Off = Record 1 large video file stop recording when out of micro SD space or video file size reaches 4GB3, 5, 10 Minutes = Record the video file for the specified time. Save the file and start a new file. This process continues until out of micro SD

space. At that time the oldest is deleted and the recording

continues. Note: There is a 1 frame overlap

between files. The last frame of the file saved becomes the first frame of the new file.

(2)

HDR HDR is for the video recording mode. The default is Off.

Motion Detection Motion detection is for video recording

mode. The default is Off.

Recording (audio) Audio recording is for video recording mode. This turns the microphone on or off. The default is On.

(3)

your photos even when you have Date Stamp (20) On. Please check Date Stamp (7) and make sure it is set to date or date/time and not set Off.Read my rant about this horrible GUI

design here.

Photo Size Photo size is the

resolution for the photo mode. The default is 12M 4032×3024.

Sequence Sequence is for the photo

mode. When Sequence is set On pressing the OK button to take a photo will cause the SJ4000 to take continuous photos until the OK button is pressed again. This mode takes 1 photo every 3 seconds. The default is Off.

Quality Quality is for the photo

mode. The default is Normal.

(4)

photo mode. The default is Auto.

White Balance The default is Auto.

Color The default is Color.I

could not get B&W or Sepia to work for photos or video on version 20131209.

ISO The default is Auto.

Exposure Exposure settings are for

(5)

from -2 to +2 in 1/3 increments. The default is 0.

(6)

Anti-Shaking The default is off.

Quick Review Quick review is for the

photo mode. Quick review sets the amount of time the photo will be displayed after it is taken. The default is off.

Date Stamp (7) Date Stamp (7) is for the

photo mode. This is the second Date Stamp in the menu. This allows you to turn off the date stamp or choose the date stamp format. However the other Date Stamp (20) menu setting must be On for the date stamps to show up.Rant: This is just

horrible GUI

(7)

stamp. If you want to turn on a date stamp just choose one of the other two options Date or Date/Time. Done deal. Delete the other Date Stamp (20) from GUI.

Lanugage The default language is

English.

Date Time Enter the current date

and time. You can also change the display format. The default display format is YY/MM/DD. There are two other

(8)

this screen.

If you pull out the battery you will need to reset the date time.

Auto Power Off The default is Off.

Beep Sound The default is

On. Turning this off not only stops the beeps but also silences the shutter sound when taking photos.

screensavers The default is 1 Minute. I

was hoping for flying toasters but these options just power down the screen to conserve battery life.

Frequency The default is 60 Hz.

Car Mode The default is Off. When

(9)

recording when the car starts up and shutdown when the car is turned off. Please enable Cyclic Record

Delete Delete allows you to

delete the current file or all files.

Format The default is cancel.Bug:

You might of noticed the GUI skin changed color. The GUI skin text is white on blue until you format the micro SD card. Once formatted the GUI skin text is white on black. The GIU will stay this way until the SJ4000 is power cycled.

Default Setting The default setting is

(10)

defaults.

Version Version numbers are just

References

Related documents

If the MDVR’s current video type is different with the setting for the MDVR record last time, the video file can not playback, for example, the video type of record files is NSTC,

Overview menu: Camera Select Record Select Record Mode Record Frame Rate Video Quality Record Schedule Sub Menu Hard Drive Setup Motion Setup.. Restore

file play and control: First choose a empty video window in left panel, double click file icon or select in popup menu to control play, stop, record, stop record, snap... Play

On Video Recording Mode, Press OK to stop recording then press MENU button once open System Settings

Press the POWER ON/OFF key to switch the device on; after that, start video recording and press the OK key to stop; in video mode, press the MENU key to enter the menu setup

(Note: if you forget to press the SHUTTER button the 2 nd time to stop video recording, it will record the video indefinitely until the memory capacity is full or until you power

(d) Before begin to record a video, select the output file format from the drop down menu, the recording video type, quality and recording duration time.. Also the

For WriteMemory commands and video-mode commands, filename can be test pattern, frame buffer, video file, image file or binary file. Note 5 CSI Compression commands require