• No results found

Understanding ACD and SMDR

N/A
N/A
Protected

Academic year: 2021

Share "Understanding ACD and SMDR"

Copied!
6
0
0

Loading.... (view fulltext now)

Full text

(1)

Understanding ACD and SMDR

If your contact center uses Customer Interaction Solutions and the Mitel SX-2000 or 3300 ICP, all data used in reports and real-time monitors are generated from two PBX data streams.

The two streams are referred to as the Station Message Detail Recording (SMDR) stream and the Automatic Call Distributor (ACD) Real-time events stream. Each stream

connects the Contact Center Management Enterprise Server to the PBX using a serial com port or a TCP/IP network connection. Each stream is generated independently and has its own set of control attributes within the PBX. The only similarity between the two streams is the Answered ACD Queue Calls record, which is generated for both the SMDR and ACD streams when an ACD call is answered, depending on PBX programming.

SMDR StreamThe SX-2000 and 3300 ICP have two classes of SMDR records: External SMDR (generated when a PBX trunk is involved in the call) and Internal SMDR (generated

when there are no trunks involved in the call). Each sub-stream is governed by separate configuration options programmed on the PBX and must be enabled to send data to the Enterprise Server.

External SMDR recordsThe following is an example of an External SMDR record: 01/14 09:24 00:00:59 T201 003 P001 100 1011T 1405

Where,

01/14 is the date the caller contacted your contact center09:24 is the time the call originated 00:00:59 is the amount of time the agent spoke with the caller before transferring the callT201 is the number of the trunk that the caller dialed in to003 is the time to answer for the agent (not the time spent in queue)P001 is the reporting number of the ACD path queue the call was queued to 100 is the reporting number of the agent group1011 is the ID of the agent who first answered the callT is the transferred call identifier1405 is the ID of the agent whom the call was transferred toThis means that an outside caller dialed in to the contact center on Trunk 201, on January 14th at 9:24 AM. The call was queued to the ACD Path Queue 1 (shown as P001), queuedto Agent

Group 100, and answered by Agent 1011 after 3 seconds waiting in queue. The

agent who answered the call talked to the customer for 59 seconds before transferring the call to Agent 1405.

Internal SMDR recordsThe following is an example of an Internal SMDR record: 01/14 07:20 00:00:10 6979 002 6515 I 7015

Where,

1/14 is the date the call was made07:20 is the time the call originated00:00:10 is the length of the call6979 is the extension that the call was made from002 is the time to answer for the agent (not the time spent in queue)6515 is the dialable number of the ACD queue the call was made toI is the internal call identifier7015 is the ID of the agent who answered the callThis means that on January 14th at 7:20 AM, internal Extension 6979 dialed the ACDQueue P001 with dialable number 6515.

The call was answered by Agent 7015 after 2

(2)

involved in this call.

An External SMDR record is generated by the PBX when

1. A call is completed (i.e. when all parties involved in the call have hung up). This can be either an answered or abandoned call.

2. A call is transferred

3. An Account Code is entered

4. A call is interflowed from the ACD queue to a new destination

5. A call is requeued back to the ACD queue by an agent who did not answer the call

6. A call is Queue Unavailable and routed to another answering point An Internal SMDR record is generated by the PBX when

1. A call is completed (i.e. when all parties involved in the call have hung up) between two devices on the PBX (extensions or agents), with no outside parties (trunks) involved in the call

2. The call is an internal answered call only

3. Calls to ACD queues report based on the dialable number of the queue, not the reporting number as found in the External SMDR records.

4. All parties in the call have their Class of Services set to enable SMDR Internal recording

5. The PBX has the Internal SMDR option enabled.

An SMDR record will only be sent to the Contact Center Management Enterprise Server in the previously mentioned conditions, when

1. All parties involved in each call segment have their PBX Class of Service set to record SMDR calls (incoming and outgoing)

2. The SMDR Options on the PBX have been set to record incoming, outgoing, and internal calls

3. The SMDR Options have been set to generate new SMDR records for each transferred segment of a call

Common problems in SMDR stream configuration1. Class of Service forms in the PBX(s) have not been enabled with SMDR

recording. Calls that involve these devices will not send SMDR records to the Contact Center Management Enterprise Server.

2. Agent IDs and extension are programmed to be longer than 4 digits (for example, Agent ID 50567) but the Extended digit length option is not enabled on the

SMDR Options Assignment form. This will truncate the SMDR record to 4 digits which will cause real-time and reporting errors.

3. The contact center is receiving calls from internal sources (other extensions in the PBX) but does not have the Internal SMDR option enabled in the SMDR Options form of the PBX and/or does not have the Class of Service form Record Internal SMDR option enabled.

(3)

information on what ACD

extensions (as defined in the PBX) are doing and provides a summary of the Queue Realtime statistics every 15 seconds.

ACD Real-time events stream queue statisticsIf the path or agent group has the Real-time events option enabled on the PBX, the PBX

will generate a summary of the path queue and agent group queue stats (for example,

calls waiting in queue, longest waiting caller, and available agents) every 15 seconds, however Contact Center Management makes use of the Path Queue event only.

NOTE: This event can be delayed by up to 15 seconds. When you are looking at theQueue Now monitor in Contact Center Client, note that the On ACD column is directly

mapped to this event and signifies the number of agents logged on and available. This statistic is updated every 15 seconds. The Agent by Position and Agents by Time

statistics are updated when an agent changes state, so the statistics in these monitors are considered accurate to the second, and could appear to be out of sync with the Queue Now column until the next event update.

The Agent events sub-stream of the ACD Real-time events stream generates a record when an ACD extension (regardless of whether an agent is logged in to an extension), changes their state, causing a monitor to display the changed state of the agent. ACD Real-time events are generated when

1. An agent logs in/out of an extension

2. An agent sets/removes a Make Busy reason code 3. An agent sets/removes DND

4. An agent answers a call from an ACD path queue

5. An agent enters/leaves the Work Timer state at the end of an ACD path queue call 6. An agent answers an incoming call that did not come from an ACD queue

7. An agent makes an internal/external outbound call (the event is not generated until the call is answered)

8. An agent puts any of these calls on hard hold (red button hold) 9. A call on hard hold is answered or abandoned

10. An agent completes a call and becomes idle

The ACD Real-time event stream allows Contact Center Management to map the agent state (for example, Idle, On ACD, Outgoing, Incoming, Unavailable, and Logged in). The ACD Real-time event stream and the SMDR stream have certain records generated by the same action (for example, agent answering an ACD call, agent on an outbound call, agent answering an incoming call). ACD Real-time events can be generated when there is no accompanying SMDR record, for example, when logging in/out or setting Make Busy Reason Codes.

The ACD Real-time event stream is not controlled by any PBX options, with the exception of the This Extension can have an ACD Agent option.

(4)

for example, agents entering Account Codes, agents transferring calls to other answering points, calls Interflowing, calls Overflowing, calls abandoning, etc.

ACD Real-time events can also be generated when there is no accompanying SMDR record, if

1. The call is internal and the SMDR option for Internal SMDR is not enabled 2. The call is transferred and the SMDR option Report All Transfers is not enabled 3. The call involves one or more parties that do not have the Class of Service option in the PBX set to record SMDR records.

How data streams are usedThe SMDR stream provides the data for almost all of the Contact Center Management

reports, with the exception of Agent and Agent Group Event by Period reports.

The SMDR data stream provides statistics for historical reports and real-time monitors. It provides statistics for the following devices

1. Trunks – All data

2. Queues – All data, with the exception of Current Calls Waiting, Longest Waiting Caller, and Agents On (which come from the ACD Real-time events stream) 3. Account Codes – All data

4. DNIS – All data 5. ANI – All data

6. Extensions – All data

7. Agents/Employees – All historical reports, with the exception of Agent/Employee by Period reports (which come from the ACD Real-time events stream). All agent monitors come from the ACD Real-time event stream.

Understanding the time element SMDR data is credited toAll SMDR derived statistics are credited to the 15 minute interval that the call or call

segment originated during. This method of crediting can be misleading if you do not understand that the calls are credited in this manner. For example, if an ACD queue call starts at 07:59 and continues for 65 minutes, this call will credit the ACD queue with 65 minutes of talk time in the interval 07:45 to 07:59. That is, in a 15 minute interval, a single call will account for 65 minutes of queue talk time. The reason for crediting calls in this manner is to support ErlangC traffic calculations. Therefore, there is no point in examining a call being spread over multiple 15 minute increments in a

report when the call derives from the SMDR stream, as the data will not make sense.

Understanding the time element ACD data is credited toAgent event data is used to build Agent Event by Period reports. You can identify these

reports easily as the top of the report shows the data derived from the ACD Real-time event stream (for example, Logout date/time, Total shift time, Idle time, ACD true talk time, etc).

(5)

logs in at 07:59 and works an eight hour shift will have a single record generated in to the Contact Center Management database. The record that is generated will be credited to the day they logged in and will have a start time that falls within the 07:45 to 07:59 interval. The difference between calls and agent stateThe SMDR-based reports and statistics are events that originate when a caller initiates a

call. The call can be handled by multiple queues and agents within the contact center. An external call that arrives on a trunk can be offered to several queues and agents as the call is routed and transferred around the contact center. The trunk sees this as a single call but the call will be credited to every device it passed through.

For example, a call arrives on Trunk 209, is queued to Path 001 (Customer Service), queued to Agent Group 100, and answered by Agent 5000, who talks for two minutes. The call is then transferred to Path 002 (Order Tracking), queued to Agent Group 101, and answered by Agent 6000 who completes the call.

Contact Center Management will credit all parties and devices involved in the call, and will record the talk time of each party and device involved in the call. Therefore, if you were to blindly add all call pegs from all devices in the call, you would have counted 5 calls. It is important to understand how call routing is being handled by the PBX in order to properly interpret report statistics.

The reports which are based on agent state statistics are meant to detail what an agent accomplished during their shift. The main statistic being presented is theses reports is the amount of time an agent is in different states when they could have been answering calls. These statistics provide managers with answers to their most important questions, for instance, how long an agent was logged in to a queue and what agent states the agent was set to during this time (for example, ACD talk time, Make Busy, DND, Work Timer,

Idle, Inbound personal, Outgoing call, Holding calls, etc.).

Agent reports from the SMDR stream, such as Agent Performance reports, report on agent calls from the SMDR stream and are credited to the same interval logic as queue statistics.

These two different reports on agent productivity are fundamentally different. Agent information from the SMDR stream can have multiple calls credited to an agent ID, as an agent with multiple extensions can handle multiple calls at once. Agent information from the ACD Real-time event stream displays the state of an agent and will only allow an agent to be in one state at a time. SMDR call information for an agent is related to the soft or hard set telephone, whereas ACD Real-time event information is related to what the agent is doing.

If an agent is handling multiple calls at once, Contact Center Management will credit the Agent Event by Period statistic to the time of the active call, so that an agent can never be set to a state for longer than they were logged in.

Troubleshooting frequently encountered problems1. Your contact center has agents and queues that are servicing internal callers, for

(6)

talk times for the Agent Event by Period report are significantly greater. The most likely cause of this problem is that you do not have Internal SMDR enabled on the PBX and/or the Class of Service for the agent or the callers do not have Internal SMDR enabled.

2. Your contact center has a queue that services internal callers, but you do not see any abandoned calls or interflowed calls for the specified queue. You have

confirmed that Internal SMDR options are enabled.

The most likely cause for this problem is that the Internal SMDR stream only generates SMDR records when a call is answered, and no records are generated for calls that are abandoned, interflowed, or transferred.

3. The number of Account Code entries credited to an agent does not equal what the agent says they entered.

The most likely causes of this problem are that the SMDR options are not enabled for Account Codes or agents are not entering Account Codes while talking to customers. Account Codes will only be tagged if entered while a call is active. 4. An Agent by Period report shows all 0’s for an agent ID but the Agent Event by Period report for the same agent ID shows a full set of data.

The most likely cause of this problem is the agent ID’s are longer than 4 digits, but the SMDR option for Extended digit length is not enabled. As a result, the SMDR record has the agent ID truncated to 4 digits and Contact Center Management cannot match the SMDR record to the agent ID.

5. The number of calls to a path does not equal the number of calls answered by the corresponding agent group.

The most likely cause of this problem is that agents are transferring or conferencing ACD calls. In this situation, SMDR will generate one peg to the queue but multiple pegs to the agents (one for the agent transferring the call and one for the agent who received the call).

Last Modified By: ademski, Tuesday, July 20, 2010

References

Related documents

Quality: We measure quality (Q in our formal model) by observing the average number of citations received by a scientist for all the papers he or she published in a given

All the figures and tables should be labeled (Times New Roman 11) and included in list of figures and list of tables respectively.

Making sacramental wine requires special attention and care, starting with qvevri washing and marani hygiene and ending with fermentation, aging and storage. During

hypergeometric functions by employing the generalized Gauss’s second summation the- orem, Bailey’s summation theorem and Kummer’s summation theorem obtained earlier by Lavoie,

○ If BP elevated, think primary aldosteronism, Cushing’s, renal artery stenosis, ○ If BP normal, think hypomagnesemia, severe hypoK, Bartter’s, NaHCO3,

This conclusion is further supported by the following observations: (i) constitutive expression of stdE and stdF in a Dam + background represses SPI-1 expression (Figure 5); (ii)

Những ký hiệu nào do chúng ta gõ vào tại tham số Keynote trên thanh Properties, không dùng t ệp Keynote*.txt thì phần mô tả (text) không được

In this study, it is aimed to develop the Science Education Peer Comparison Scale (SEPCS) in order to measure the comparison of Science Education students'