Ceiling Mounted Projector Hanger Installation Manual

׹ኇᐠ֜ഥԒӤ࢜Ԋ၆ᇳ݂ਪ

Ceiling Mounted Projector Hanger Installation Manual

䊒䊨䉳䉢䉪䉺䊷ᄤ੗ๆ⌕ᑼ䊑䊤䉬䉾䊃ڥ䉍п䈔䊙䊆䊠䉝䊦

78P30250101A

ԃդ஠׹ኇᐠӤ࢜ھܻۡӤ࢜ҏᡝ

Install the hanger on the ceiling

ᄤ੗ๆ⌕ᑼ䊑䊤䉬䉾䊃䉕ᄤ੗䈮࿕ቯ䈜䉎

ᄤ੗ๆ⌕ᑼ䊑䊤䉬䉾䊃䉕ᄤ੗䈮࿕ቯ䈜䉎

 ஠ϐငԊ၆ԁޟ׹ኇᐠӤ࢜ඨΣӤ࢜ҏᡝ

պ΢ᒳ൛ઠϤޜ̅ϤޜΏ᝝ᖇႧ

Fix Inflate Screw (Part H) onto the ceiling

Њ!ϒ!ᚌ!ҙ

Caution

٧!๎

Њ!ϒ!ᚌ!ҙ

Caution

٧!๎

ᓗѻЊཆϵຣݙؖᑆݙ྆਽̅ψѤ๼໦ᚉ̫֗ڟϴ̟Ą ቜ˼Њཆػڪቡ௩రڟ͎ʣʿۣۖ̅ᓗѻ˃ුи࿨̅ٶອ௎Ą ͫ৖Њཆػ̫΁ڟ̈ۆٖ-ᓗѻชଇڟᑓ࡭Ą ቜ˼Њཆػए੝̅ᆡᐞ௎Ą ቜ˼Њཆػ઼ώڢ࣢௎Ą

Avoid any places with high temperature or humidity or subject to contact with water. Do not install the product near the vents of air conditioners and avoid places where it is dusty and fumy.

Only install on a horizontal ceiling and avoid slanted surfaces. Do not install in places subject to vibrations and shocks.

Do not install in places subject to direct bright light, which may cause fatigue in the eyes of users when viewing the display.

㜞᷷䇮ᄙḨ䇮෶䈲᳓䈱䈎䈎䉎႐ᚲ䉕ㆱ䈔䉎䇯 䉣䉝䉮䊮䈱ㅢ᳇ญઃㄭ䇮෶䈲၎䉇Ⴒ䈱䈅䉎႐ᚲ䉕ㆱ䈔䉎䇯 ᳓ᐔ䈭ᄤ੗᧼䈮䈱䉂ข䉍ઃ䈔䇮௑ᢳ㕙䈻䈱ข䉍ઃ䈔䈲ㆱ䈔䉎䇯 ᝄേ෸䈶ⴣ᠄䉕ฃ䈔ᤃ䈇႐ᚲ䉕ㆱ䈔䉎䇯 ᒝ䈇⋥኿ᣣశ䈱ᒰ䈢䉎႐ᚲ䉕ㆱ䈔䉎䇯 7. Њཆढቜػӹᆇጠֺ౜ྱॼ՗ઊڟڪ෢-̾ሂ۳ڪॉڟ޺௽Ą

Remember to maintain ample space around the projector to ensure good ventilation. ឵᳇䉕⦟䈒䈜䉎䈢䉄䇮䊒䊨䉳䉢䉪䉺䊷๟ㄝ䈮චಽ䉴䊕䊷䉴䉕⏕଻䈜䉎䇯

8. ߏʟЊϒ̅թ̥๎ʹവΡ-Њཆ܉-ᄯᐮޥ̈ۆٖڟൖ်̅Ꮅጅࠞʴؒ਽ڟኌ໋ѝ༊Ą To ensure safety and avoid any accident, it is necessary to investigate the structure of the ceiling and select an appropriate and durable location before installation.

቟ో䉕⏕଻䈚䇮ᅤ૗䈭䉎੐᡿䉅ㆱ䈔䉎䈢䉄䇮ข䉍ઃ䈔೨䈮ᄤ੗᧼䈱᭴ㅧ䉕䉼䉢䉾䉪䈚䇮⠴ਭᕈ 䈱䈅䉎ㆡᒰ䈭ข䉍ઃ䈔႐ᚲ䉕ㆬ䈹䇯

9. ̈ۆٖᄯ৖̛ᆤӹᆇጠ̅Ϥޜᒂࡧු䋴ࡻ̾ʰ-̸ᄯሂ۳Ф՗ઊڟ઼ݙ৖؛֧ϴኪ̅֏ͺ ʹʨڟए੝Ą

The ceiling should have load-carrying capability to sustain more than four times the total weight of the projector and the hanger. Also make sure it has enough strength to withstand earthquakes and other shocks.

ᄤ੗᧼䈲䊒䊨䉳䉢䉪䉺䊷䈫䊊䊮䉧䊷䈱✚㊀㊂䈱䋴୚એ਄䉕ᡰᜬ䈪䈐䇮਌䈧࿾㔡෸䈶䈠䈱ઁ䈱 ᄖ䈎䉌䈱ᝄേ䈮⠴䈋䉎ᒝᐲ䉕⏕଻䈜䉎䈖䈫䈏ᔅⷐ䈪䈜䇯

1. ߏሂ۳Њϒ-ϵЊཆ܉-ቜϑཏ஠ኧ᜞ΏЊཆჳقपծᎳЈ˱࣠-ӂൡ۳ІΏЊཆჳقप ػЊϒڟϴ̟-̾ۯ̠ݣ੤уĄ

To ensure safety, please read this manual carefully before installation and follow the instructions herein. Store this manual in a secure place for future reference.

቟ో䈮䈍૶䈇䈇䈢䈣䈒䈢䉄䈮䉅䇮ข䉍ઃ䈔೨䈮ᧄ䊙䊆䊠䉝䊦䉕⦟䈒䈍⺒䉂䈮䈭䉍䇮䈖䈖䈮⸥タ 䈘䉏䈢ᚻ㗅䈮ᓥ䈏䈦䈩䈒䈣䈘䈇䇯ᧄ䊙䊆䊠䉝䊦䈲䇮䈇䈧䈪䉅ෳᾖ䈪䈐䉎䉋䈉䈮ᄢಾ䈮଻▤䈚䈩 䈒䈣䈘䈇䇯

2. ϰᎿჲڟЊཆ̅ጇѰ̟ٲؚఅЙڟ௩రຒ๬̅ʡࢷฌࣛ-Ώყఅ੦ઠӇϒ˚؛ጊؚࡊΡ ڟߺᘰٲݡ௰ψĄ

The manufacturer shall not be responsible legally for any equipment damage or personal injury caused by incorrect installation or operation not covered in this manual.

ਇㆡಾ䈭ข䉍ઃ䈔䉇ᠲ૞䈮⿠࿃䈜䉎ᯏེ䈱៊ኂ෶䈲ᕋᚒ䈮䈧䈇䈩䈲䇮䊜䊷䉦䊷䈲৻ಾ⽿ છ䉕⽶䈇䉁䈞䉖䇯

3. ΏϤޜ˞௩ࡎߏ࣠ؾЊཆ̅ض֣-࠷ϰʡߏؖ̈ഓԮࣛĈЃϴኪăᄶࡳČ൉-ؚఅЙ˞ ௩రຒ๬̅ʡࢷฌࣛ-Ώყఅ੦ઠӇϒ˚؛ጊؚࡊΡڟߺᘰٲݡੰᖠĄ

The ceiling mount bracket is designed for installing and removing easily. The manufacturer shall not be liable to the damage of equipment and personnel injuries arising out of human factors, acts of gods, such as earthquake.

䈖䈱䊑䊤䉬䉾䊃䈲䇮ข䉍ઃ䈔䈫ข䉍ᄖ䈚䈏◲න䈮䈪䈐䉎䉋䈉䈮⸳⸘䈘䉏䈩䈇䉎䈢䉄䇮ੱὑ⊛䉁 䈢䈲࿾㔡䈭䈬䈱⥄ὼἴኂ䈮䉋䈦䈩⊒↢䈚䈢⸳஻䈱⎕៊෸䈶ኻੱ்ኂ䈮䈧䈇䈩䇮ᧄ䊜䊷䉦䊷 䈲䇮ቢో䈮ᵷ↢䈚䈢㑐ㅪᴺᓞ⽿છ䉕⽶䈇䉁䈞䉖䇯

4. ЊཆӹᆇጠϤޜᄯΥટ๾ʡࢷઈїЊཆĄ

The projector hanger must be installed by professional personnel.

䊒䊨䉳䉢䉪䉺䊷䈱䊑䊤䉬䉾䊃ข䉍ઃ䈔䈲䇮ᔅ䈝ኾ㐷䈱ᬺ⠪䈏ข䉍ઃ䈔䈭䈔䉏䈳䈭䉍䉁䈞䉖䇯 5. ഒባЊཆؖ஋ਸ਼Ώ୰ܢ-э̍ᄯΥ2ʡઈї-̾ᓗѻԕࡧڟڐܢ૬༣అЙʡࢷؖڐܢ

ฌࣛĄ

At least two persons are needed to install or remove the product to avoid any hazard caused by falling objects.

‛䈱⪭ਅ䈮䉋䉎ෂ㒾䉕ㆱ䈔䉎䈢䉄䇮ᯏེ䈱ข䉍ઃ䈔㪆ข䉍ᄖ䈚䈮䈲ዋ䈭䈒䈫䉅2ฬ䈏ᔅⷐ䈫䈭 䉍䉁䈜䇯

6. Њཆ܉ቜϑሂჯϤޜ௎ֺ౜ڟᑗ࿪;

Њ!ϒ!ᚌ!ҙ

Caution

٧!๎

10. ቜ˼ьїᝐԁψѤྭχ-˼պ΢ːক๬ڟྭχ-࠷ФψѤੰᖠቜჄѱڟ༄ኛ ੦ᒒ൜Ą

Do not modify any accessory or use broken parts. Contact the local distributors with any questions.

ㇱຠ䈱ᡷㅧ䉇៊்䈚䈢ㇱຠ䉕૶↪䈚䈭䈇䈖䈫䇯䈗⾰໧䈲䇮ᦨነ䈱ઍℂᐫ䈮䈍໧䈇 ว䉒䈞䈒䈣䈘䈇䇯

11. ᖇႧᒳ൛)˸˼̾྆˃ڟӯʨᖇ̿ᒳ൛-̾ѻఅЙᒳ൛ᔞ඙ؖᒳ̱ڟ๬ࣛ*Ą Tighten all screws (do not exert force on any screw with excess torque to avoid breaking the screw or damaging its thread).

䈜䈼䈩䈱䊈䉳䉕✦䉄䉎䋨䊈䉳෶䈲䉴䊧䉾䊄䈱៊்䉕ㆱ䈔䉎䈢䉄䇮ㆊᐲ䈱✦䉄ㆊ䈑䈮 ᵈᗧ䋩䇯

㪈㪉㪅㩷 ΏϤޜؚ৖̛ᆤӹᆇጠڟࡧුߏ15Kg. (33 lbs.)̾ʮĄ

The maximum weight of the ceiling projector that the hanger can support is below 15Kg. (33 lbs.).

ᧄ䊑䊤䉬䉾䊃䈏ᡰᜬ䊒䊨䉳䉢䉪䉺䊷ᦨᄢᡰᜬ㊀㊂䋺15Kg. (33 lbs.)㩷એਅ䇯 13. Ώ૮ޜਸ਼ʟᙚ૮ӹᆇጠ-˚͑͟૮֏ͺڐχ-ծᙒ໱ʡࢷᙚ૮ϵΏϤޜʰĄ

Do not hang any other objects except the projector on this hanger. Hanging on this hanger by any personnel is strictly prohibited.

ᧄ䊊䊮䉧䊷䈮䈲䊒䊨䉳䉢䉪䉺䊷䉕ษ䉍ਅ䈕䉎એᄖ䈲䇮䈠䈱ઁ䈱‛ຠ䉕ษ䉍ਅ䈕䈩䈲 䈭䉍䉁䈞䉖䇯䉁䈢૞ᬺຬ䈏ᧄ䊊䊮䉧䊷䈮ษ䉍ਅ䈏䉎䈱䈲෩⑌䇯

14. ̠ݣ஋ਸ਼ӹᆇጠ̅Ϥޜढ-๼ϵ̈ۆٖॼʮᒳ൛̌̅ᒳृ-̸ϰ۝ೈպ΢๼ϵ̈ ۆٖॼʮдၒĄ

Drill holes and screws will be left on the ceiling once the projector and hanger are removed. Stains may occur after extended use.

䊒䊨䉳䉢䉪䉺䊷෸䈶䊑䊤䉬䉾䊃䉕ข䉍ᄖ䈚䈢ᓟ䈲䇮ᄤ੗᧼䈮䊈䉳ሹ䈫䊈䉳䈏ᱷ䉍䉁䈜䇯 䉁䈢䇮㐳ᦼ૶↪ᓟ䈲ᄤ੗᧼䈮ᨴ䉂䈏ᱷ䉎႐ว䉅䈅䉍䉁䈜䇯

15. ࠷ФψѤନ̜ڌᚊ-ቜ̾࠼̜ჳقपߏ̺Ą

Please consult the English language manual for any dispute on the terms. ⻉᧦ઙ䈮䈍䈔䉎໧㗴䈮㑐䈚䈩䈲䇮⧷⺆ 䊙䊆䊠䉝䊦䉕䈗ෳᾖ䈒䈣䈘䈇䇯

׹ኇᐠ֜ഥԒӤ࢜

Ceiling Mounted Projector Hanger

䊒䊨䉳䉢䉪䉺䊷ᄤ੗ๆ⌕ᑼ䊑䊤䉬䉾䊃

䊒䊨䉳䉢䉪䉺䊷ᄤ੗ๆ⌕ᑼ䊑䊤䉬䉾䊃

ߝ࡙㩷㩷㪆㩷㩷

㩷㩷㪆㩷㩷Length㩷㩷㪆㩷㩷

㩷㩷㪆㩷㩷㐳䈘

㐳䈘

 ΏϤޜశ഻۝ݙߏ116mm, శ۝ߏ578mmĄ  Length of Hanger: From 116mm up to 578mm.  ᧄ䊑䊤䉬䉾䊃䈱ᦨ⍴㐳䈘䈲㩷㩷㩷 116mm 䇮ᦨ㐳䈲578mm䇯  ͪૃ398mm֗578mmߏ͟ቡጌڟ۝ݙ )Ԑ22.5mmʙि*Ą

 Adjustable length: From 398mm to 578mm (spaced at every 22.5mm)

 䈠䈱ᄖ㩷398mm 䈎䉌㩷578mm 䉁䈪䈲⺞ᢛน⢻䈭㐳䈘㩿22.5mm৻ᨓ㪀䈫䈜䉎䇯Ą

1

ҏӤ࢜ᎌҢጒ൜

Application Scope of the Hanger

ᧄ䊑䊤䉬䉾䊃䈱ㆡ↪▸࿐

ᧄ䊑䊤䉬䉾䊃䈱ㆡ↪▸࿐

 ۝ݙ̅ᅶݙϵ300mm (L) x 250mm (W)̾˱ڟ

ӹᆇጠϤ૮̌߱ኌ΢ЪጠႍĄ

 This product is suitable for projectors with

A

B

C

D

e

g

f

h

i

j

k

l

M

Arm --- 4 pcs

Screw with fixed washer for projector housing --- 4 pcs

Nylon washer for projector housing --- 8 pcs

Projector bracket --- 1 pcs Flat Washers --- 4 pcs

Nyllon nut (M6 type) Ceiling mount bracket --- 1 pcs

Inflate screw M6 L=50mm

Height adjust

outside pipe --- 1 pcs Height adjust Inside pipe --- 1 pcs

Screw with spring washer

(M4 type) --- 7 pcs Carriage Bolt --- 3 pcs Button screw (M4 type) --- 1 pcs

ѓ၆ႭӇ

Enclosed parts and accessories

หᪿㇱຠ෸䈶䉝䉪䉶䉰䊥

หᪿㇱຠ෸䈶䉝䉪䉶䉰䊥

፡ᐌُ࡙㩷㩷㪆㩷㩷

㩷㩷㪆㩷㩷Adjusting angle㩷㩷㪆㩷㩷

㩷㩷㪆㩷㩷ⷺᐲ⺞ᢛ

ⷺᐲ⺞ᢛ

 ;͟͡ଋᕽ360䍽Ą

 For turning 360䍽 degrees to left and right

 Ꮐฝ㪊㪍㪇䍽ᣓ࿁น⢻䇯

 ̫΁!0!ܭڢชଇՏݙ;㫧10䍽 Ą

 Horizontal / Vertical inclination angle: 㫧10䍽

 ᳓ᐔ㩷㪆㩷ု⋥௑ᢳⷺᐲ䋺㫧㪈㪇䍽䇯

 ЪᒳΔ͟ૡ֙ӹᆇጠՏݙڟᖬႧݙĄ

 The nut is used to control the tightness of

the projector angle.㩷

 䈖䈱䊅䉾䊃㩷䈲䊒䊨䉳䉢䉪䉺䊷ⷺᐲ䈱✦ઃᐲ䉕

೙ᓮ䈪䈐䉎䇯

!!!!!!!!!

ᒳΔቡጌ෸Υટ๾ʡࢷઈїĄ

ᒵᐅձܚሯؑӤ࢜ޟߝ࡙

Select the desired suspension length

ᔅⷐ䈭䊑䊤䉬䉾䊃䈱㐳䈘䉕ㆬ䈹

ᔅⷐ䈭䊑䊤䉬䉾䊃䈱㐳䈘䉕ㆬ䈹㩷

 ࿋Ӥ࢜ߝ࡙࣏100mm ਢ

պ΢ᒳ൛(Part K)ઠː༄ЊཆЁ̛ޜڟӹᆇ ጠĂᖇ־ػҜథВϤޜ(Part G) Ą

 When the pipe is 100mm long

Fix the frame-mounted projector onto Ceiling mount bracket (Part G) with Screw (Part K).  䊑䊤䉬䉾䊃䈱㐳䈘䈏䊑䊤䉬䉾䊃䈱㐳䈘䈏㩷100mm 䈱ᤨ

䊈䉳㩷(Part K) 䉕૶↪䈚䈩䉦䊮䉼䊧䊋䊷ข䉍ઃ 䈔ᷣ䉂䈱䊒䊨䉳䉢䉪䉺䊷䉕ᄤ੗ๆ⌕ᑼ䊑䊤䉬䉾 䊃㩷(Part G) 䈮࿕ቯ䈜䉎䇯

 ࿋Ӥ࢜ߝ࡙࣏ 380mm оΰਢ  When the pipe is over 380mm long

 䊑䊤䉬䉾䊃䈱㐳䈘䈏䊑䊤䉬䉾䊃䈱㐳䈘䈏 380mm એ਄䈱ᤨએ਄䈱ᤨ ϑઠʹࣈ്(Part I)ࣈʣҜథВϤޜ (Part G)Ăϔպ΢ᒳ൛ޘ(Part L)ࠎ྆ʹࣈ ്Ăϔҁ΢ᒳ൛(Part K)ᖇ־ػʹࣈ്Ăశ ݣպ΢ᒳ౾(Part F)ؚฉػᒳ൛ޘ(Part L)Ą

First insert the Height adjust outside pipe (Part I) in the Ceiling mount bracket (Part G), and then pass the Hexagon bolt (Part L) through the Outer Sleeve and tighten it with the Nyllon nut (Part F). Lastly, secure the Outer Sleeve with the Screw with Spring washer (Part K). వ䈮ᄖ䉴䊥䊷䊑ౝ䈮䉝䉾䊌㩷(Part I) 䊷䊐䊧䊷 䊛㩷(Part G) 䉕⚵䉂ㄟ䉂䇮ᰴ䈮ᄖ䉴䊥䊷䊑䈮 ౐ⷺᬀㄟ䊗䊦䊃㩷(Part L) 䉕ㅢ䈚䈩䊅䉾䊃㩷㩷㩷 (Part F) 䈪࿕ቯ䈚䇮ᦨᓟ䈮䊈䉳㩷(Part K) 䈪 ᄖ䉴䊥䊷䊑䈮࿕ቯ䈜䉎䇯

1

2

2-1 2-1 2-1

G

G

L

K

F

I

K

2

Ԋ၆׹ኇᐠ֜ഥԒӤ࢜؏᡽

Ceiling-mounted Projector hanger installation steps

䊒䊨䉳䉢䉪䉺䊷ᄤ੗ๆ⌕ᑼ䊑䊤䉬䉾䊃䈱ข䉍ઃ䈔䉴䊁䉾䊒

䊒䊨䉳䉢䉪䉺䊷ᄤ੗ๆ⌕ᑼ䊑䊤䉬䉾䊃䈱ข䉍ઃ䈔䉴䊁䉾䊒

ሯӑ஠׹ኇᐠЛኤ࢜Ȃᚇھܻ׹ኇᐠ㩷

Fix the support frame on the projector

వ䈝䊒䊨䉳䉢䉪䉺䊷ᡰᜬ䊐䊧䊷䊛䉕䊒䊨䉳䉢䉪䉺䊷䈮࿕ቯ䈜䉎

వ䈝䊒䊨䉳䉢䉪䉺䊷ᡰᜬ䊐䊧䊷䊛䉕䊒䊨䉳䉢䉪䉺䊷䈮࿕ቯ䈜䉎㩷

 պ΢ᒳ൛(Part ̌)ઠᙚᒗ̛ޜ(Part A)ᖇ־ػӹ

ᆇጠϤ૮̌ĂЊཆढ࠷ᒳ൛̊۝Ă͟ઠͻᏸ࿬̰ (Part C)Ⴤᒳ൛ʙਔᖇ־ػӹᆇጠϤ૮̌Ą  Lock the Arm bracket (Part A) in the projector

hanging hole. If the Screw with fixed washer for projector housin (Part ̌) is too long, lock the supplied Nylon Pad (Part C) into the hanging hole together with the projector.

 䊈䉳 (Part ̌) 䉕૶↪䈚䈩䉦䊮䉼䊧䊋䊷㩷(Part A) 䉕 䊒䊨䉳䉢䉪䉺䊷ษ䉍ដ䈔ሹ䈮࿕ቯ䇯ข䉍ઃ䈔ᤨ䈮䊈 䉳䈏㐳䈜䈑䉎ᤨ䈲䊅䉟䊨䊮䊪䉲䊞䊷㩷(Part C) 䉕䊈 䉳䈫౒䈮䊒䊨䉳䉢䉪䉺䊷ษ䉍ដ䈔ሹ䈮࿕ቯ䈜䉎䇯  ϑઠӹᆇጠ̛ᆤޜ( Part D)Ăع༊ػᙚᒗ̛ޜ!!!! ( Part A)ʰծቡጌᒳ൛ѝ༊Ăϔպ΢࿬̰(Part E) ̅ᒳ౾(Part F)ᖇ־ػᒳ൛ʰĄ

 Place projector bracket (Part D) to Arm bracket (Part A)

and then adjust the screws and then tighten the bolt with the Flat Washer (Part E) and the Nyllon nut (Part F).

 䊒䊨䉳䉢䉪䉺䊷䉰䊘䊷䊃 (Part D) 䉕䉦䊮䉼䊧䊋䊷䉰䊘䊷䊃 (Part A)㩷

਄䈻⟎䈐䇮䊈䉳䈱૏⟎䉕⺞ᢛ䈚䈩䈒䈣䈘䈇䇮ᰴ䈮䊪䉾䉲䊞 (Part E) ෸䈶䊅䉾䊃 (Part F)䉕䊈䉳䈮✦䉄ઃ䈔䉎䇯

ඝ;պ΢ڱ͟ьїቡጌᙚᒗ̛ޜڟ۝̟̌೉˱ؖ೉ʹĂծቡጌᙚ̛ࠧޜڟᒳ൛ѝ༊Ă̾਩ϫӹᆇጠ ̛ᆤޜڟ̌ѝĄ

պ΢ᒳ൛(Part K)ઠ˱ࣈ႓(Part J)ᖇ־ػː ༄ЊཆЁ̛ޜڟӹᆇጠĄ

Fix Height adjust Inside pipe (Part J) onto the frame-mounted projector with Screw (Part K). 䊈䉳㩷(Part K) 䉕૶↪䈚䈩ౝ஥䊌䉟䊒㩷(Part J) 䉕䉦䊮䉼䊧䊋䊷ข䉍ઃ䈔ᷣ䉂䈱䊒䊨䉳䉢䉪䉺 䊷䈮࿕ቯ䈜䉎䇯 պ΢ڱ͟ቡጌӹᆇጠэኌ໋਽ݙĂϔҁ΢ ᒳृ(Part L)Ⴤᒳ౾(Part F)Ăઠ˱ࣈ႓־ס ػʹࣈ႓˱Ą

The user can adjust the projector to the desired height, and then fix the Inner Sleeve in the Outer Sleeve with Carriage Bolt (Part L) and Nyllon nut (Part F). ૶↪⠪䈲⥄り䈪䊒䊨䉳䉢䉪䉺䊷䉕ㆡᒰ䈭㜞䈘 䈮⺞ᢛ䈚䈢ᓟ䇮䊗䊦䊃㩷(Part L) 䈫䊅䉾䊃(Part F) 䉕೑↪䈚䈩䇮ౝ஥䊌䉟䊒䉕ᄖ஥䊌䉟䊒ౝ䈮 ࿕ቯ䈜䉎䇯 శݣϔઠᒳ൛(Part M)ᖇ־ػʹࣈ႓ʰĂպ ʹࣈ႓Ⴤ˱ࣈ႓־סԁߏᗧסĄ

Finally, lock Button Screw (Part M) on the Outer Sleeve, securing outer and inner sleeves in place firmly.

ᦨᓟ䈮䊈䉳㩷(Part M) 䉕ᄖ஥䊌䉟䊒਄䈮࿕ቯ 䈚䈩䇮ᄖ஥䊌䉟䊒䈫ౝ஥䊌䉟䊒䉕䈚䈦䈎䉍࿕ቯ 䈘䈞䉎䇯 2-2 2-2 2-2 2-3 2-3 2-3 2-4 2-4 2-4

J

K

I

J

F

M

ھۡ֜ഥԒӤܻ࢜Ј߆ݖ

Install the hanger on the ceiling

ᄤ੗ๆ⌕ᑼ䊑䊤䉬䉾䊃䉕ᄤ੗䈮࿕ቯ䈜䉎

ᄤ੗ๆ⌕ᑼ䊑䊤䉬䉾䊃䉕ᄤ੗䈮࿕ቯ䈜䉎

 ᖳ๛(Part H)წаޟ௶Ӗ໷ו œ Њཆϵ̈ۆٖढ෸٧๎፷൬ᒳ൛(Part H)࿬ ̰ڟ૶ϖ෷ӕĄ ҁწаƖӤ࢜១ӇƖҁწаƖኆᙋწаƖᖳҔĄ œ Њཆढᐖϑሂჯ̈ۆٖڟႍᘸĂᎵጅኌ໋ڟ ᒳ൛ĂΏ਩χؚ͓ۣڟᒳ൛(Part H)Ă!!!!!! ͫኌ΢ػ̫٫ᑓĄ œ Њཆϵ̣ቴڟ̈ۆٖ෸Ф՗ઊڟ઼ݙĂծ̸ Υટ๾ʡࢷᎵጅኌ໋ڟᒳ൛Ą

 Fix Inflate Screw (Part H) onto the ceiling

œ Place the Inflate Screw (Part H) on the ceiling,

in the following order:

Washer Ɩ Iron Hanger Ɩ Washer Ɩ SpringWasher Ɩ Nut.

œ Select screws that are suitable for each type of ceiling. The enclosed Inflate

Screw (Part H) are for installation on concrete walls only.

œ In the case of installation on a wooden ceiling, make sure it is strong enough.

Do not install on decorated posts or plaster boards. Consult professional personnel to select appropriate screws.