• No results found

Optimum Load Shedding in Power System Strategies with Voltage Stability Indicators

N/A
N/A
Protected

Academic year: 2020

Share "Optimum Load Shedding in Power System Strategies with Voltage Stability Indicators"

Copied!
10
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Figure 1. Voltage profile for standard 6 bus ward-hale test
Table 1. Load flow solution 1.5 times the base power.
Table 4. Load flow solution 1.1 times the base power.
Table 8. Load flow solution 1.75 times the base power.
+2

References

Related documents

To summarise, in order to analyse a consulting intervention and failure, first of all one needs to distinguish three different systems – the client company, the consulting firm and

Three main influenc- ing aspects for the localization approach of CSR management where derived from this discussion: The issues in question (global public goods or

signi fi cant yield increase was recorded for the higher N rates. For grain protein concentration, a highly signi fi cant response to N fertilizer rate was noted. Only for the two

For the classification of trophic status according to PERMENLH No.28/2009 (based on the parameters of nitrate, phosphate and chlorophyll-a), the Epicentrum Pool is included

PD/ H-∞ integrated controller has demonstrated perfect performance for the purpose of position tracking and vibration suppression of the FLM system with the initial

Due to the fact that these pumice types (pumice, CDS, and PTS) can be used in different applications including boron industries and building process or as a radiation

Students with initial interest in any of these disciplines enter the university as an “undeclared” engineering major, and are formally in the Engineering Design Division (EDD),

The accumulation of control and monitor layers (not directly linked to stakeholders) outside the firm does not facilitate information analysis and process by the main stakeholders