• No results found

Effects of Titanium and Oxygen Content on Microstructure in Low Carbon Steels

N/A
N/A
Protected

Academic year: 2020

Share "Effects of Titanium and Oxygen Content on Microstructure in Low Carbon Steels"

Copied!
5
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Fig. 1Size distribution of inclusions in specimen.
Fig. 5Effects of titanium concentration on number and volume fraction ofinclusion.
Fig. 10Variation of fraction of intragranular ferrite with increasing tita-nium concentration.
Fig. 13Optical micrograph of specimen 6 after austenization at 1623 K for10 min.

References

Related documents

To highlight the gains in terms of both storage savings and matching times with respect to SIFT, we have compared the amount of memory required to save descriptors for all 7154

Accurate estimation and forecasting of loads is a necessary enabler for the development of smart grids, energy markets and customer engagement. Starting from 2014 hourly

This could be a useful method for a lower- magnification scanning electron microscopy (SEM) study of larger aerosols, but large pore size and complicated filter structure makes

Despite this lack of a lot of natural variation in the two public cloud networks, Choreo is still able to exploit variation that comes with a tenant running multiple applications

Improving on this NP ∩ coNP upper bound for the qualitative termination problem for OC-SSGs would require a breakthrough: we show that deciding whether the value of an OC-

147 Figure B-8: Tumour volumes plotted over time for 11 different tumours in treatment group #1, with volumes below 1000 mm 3 at the timepoint of the first treatment,

Thus the stages that are now used to describe the dissolution process of the focal relationship are: the consideration, restoration, disengagement, sensemaking and aftermath,

Taxonomy of Familiar Learning/ Educational Objects in Telemedicine Effort Contexts The Medical Education level Strategic level - oriented objects Service - oriented objects