New Malaysian Standard

MALAYSIAN STANDARDS APPROVED ON 06/01/2014 BY THE MINISTRY

OF SCIENCE, TECHNOLOGY AND INNOVATION IN ACCORDANCE

WITH THE STANDARDS OF MALAYSIA ACT (ACT 549)

New Malaysian Standard

ISC B : Chemicals and Materials

1

.

MS 2555:2014

Liquid fertilizers - Specification

2

.

MS 2559:2014

Limestone, quicklime, hydrated lime and putty lime - Methods for physical testing

ISC D : Building, Construction and Civil Engineering

1

.

MS 2526-10:2014

Urban stormwater management - Part 10: Gross pollutant traps

2

.

MS 2526-11:2014

Urban stormwater management - Part 11: Water quality ponds and wetlands

3

.

MS 2526-12:2014

Urban stormwater management - Part 12: Erosion and sediment control

4

.

MS 2526-4:2014

Urban stormwater management - Part 4: Roof and property drainage

5

.

MS 2526-5:2014

Urban stormwater management - Part 5: On-site detention

6

.

MS 2526-6:2014

Urban stormwater management - Part 6: Rainwater harvesting

7

.

MS 2526-7:2014

Urban stormwater management - Part 7: Detention ponds

8

.

MS 2545:2014

Flush valves - Specification

9

.

MS 2551:2014

10

.

MS 2562:2014

Moulded expanded perlite block and pipe thermal insulation - Specification

11

.

MS EN 13791:2014

Assessment of in-situ compressive strength in structures and precast concrete components

ISC E : Generation, Transmission and Distribution of Energy

1

.

MS 60269-5:2014

Low-voltage fuses - Part 5: Guidance for the application of low-voltage fuses

2

.

MS 61850-6:2014

Communication networks and systems for power utility automation - Part 6: Configuration description language for communication in electrical substations related to IEDs (IEC 61850-6:2009, MOD)

3

.

MS 61850-7-2:2014

Communication networks and systems for power utility automation - Part 7-2: Basic

communication structure - Abstract communication service interface (ACSI) (IEC 61850-7-2:2010, MOD)

4

.

MS 61850-8-1:2014

Communication networks and systems for power utility automation - Part 8 -1: Specific

communication service mapping (SCSM) - Mappings to MMS (ISO 9506-1 and ISO 9506-2) and to ISO/IEC 8802-3 (IEC 61850-8-1:2011, MOD)

5

.

MS IEC 60243-1:2014

Electric strength of insulating materials - Test methods - Part 1: Tests at power frequencies (IEC 60243-1:2013, IDT)

6

.

MS IEC 60243-2:2014

Electric strength of insulating materials - Test methods - Part 2: Additional requirements for tests using direct voltage (IEC 60243-2:2001, IDT)

7

.

MS IEC 60243-3:2014

Electric strength of insulating materials - Test methods - Part 3: Additional requirements for 1.2/50 µs impulse tests (IEC 60243-3:2001, IDT)

8

.

MS IEC 60664-1:2014

Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests (IEC 60664-1:2007, IDT)

9

.

MS IEC 62056-53:2014

Electricity metering - Data exchange for meter reading, tariff and load control - Part 53: COSEM application layer (IEC 62056-53:2006, IDT)

Electricity metering - Data exchange for meter reading, tariff and load control - Part 61: Object identification system (OBIS) (IEC 62056-61:2006, IDT)

ISC F : Mechanical Engineering

1

.

MS EN 1273:2014

Child use and care articles - Baby walking frames - Safety requirements and test methods

2

.

MS ISO 3452-1:2014

Non-destructive testing - Penetrant testing - Part 1: General principles (ISO 3452-1:2013, IDT)

3

.

MS ISO 3452-4:2014

Non-destructive testing - Penetrant testing - Part 4: Equipment (ISO 3452-4:1998. IDT)

4

.

MS ISO 3452-5:2014

Non-destructive testing - Penetrant testing - Part 5: Penetrant testing at temperatures higher than 50 °C (ISO 3452-5:2008, IDT)

5

.

MS ISO 3452-6:2014

Non-destructive testing - Penetrant testing - Part 6: Penetrant testing at temperatures lower than 10 °C (ISO 3452-6:2008, IDT)

6

.

MS ISO 9712:2014

Non-destructive testing - Qualification and certification of NDT personnel ISO 9712:2012, IDT)

ISC G : Information Technology, Communications and Multimedia

1

.

MS 2539:2014

Information technology- Security techniques - Information security management guidelines for industrial automation and control system (IACS) based on MS ISO/IEC 27002

2

.

MS ISO/IEC 27003:2014

Information technology - Security techniques - Information security management system implementation guidance (ISO/IEC 27003:2010, IDT)

3

.

MS ISO/IEC 27004:2014

Information technology - Security techniques - Information security management - Measurement (ISO/IEC 27004:2009, IDT)

ISC H : Petroleum and Gas

1

.

MS 2544:2014

Oil and gas production facilities - Protective coatings and linings - Specification

1

.

MS 2548-1:2014

Plastics piping system for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticised poly(vinyl chloride)(PVC-U), polypropylene (PP) and polyethylene (PE) - Part 1: Dimensions

2

.

MS 2548-2:2014

Plastics piping system for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticised poly(vinyl chloride)(PVC-U), polypropylene (PP) and polyethylene (PE) - Part 2: Technical delivery specifications

3

.

MS 2549:2014

Plastics - Film and sheeting - Metallised cast polypropylene (MCPP) film - Specification

4

.

MS 2557:2014

Plastics - Film and sheeting - Biaxially oriented poly(ethylene terephthalate) (PET) films (ISO 15988:2003, MOD)

5

.

MS 2566:2014

Plastics - Film and sheeting - Vacuum metallised biaxially oriented poly(ethylene terephthalate) (MPET) films - Specification

6

.

MS 2567:2014

Plastics – Film and sheeting - Vacuum metallised biaxially oriented polypropylene (MBOPP) films- Specification

ISC K : Packaging and Logistics

1

.

MS 1990-4-9:2014

Manual of tests and criteria for transport of dangerous goods - Part 4: Classification procedures, test methods and criteria relating to Class 2, Class 3, Class 4, Division 5.1, Class 8 and Class 9 - Section 9: Class 9

2

.

MS 1990-5:2014

Manual of tests and criteria for transport of dangerous goods - Part 5: Test methods concerning transport equipment

ISC L : Road Vehicles

1

.

MS 2395-2:2014

Road vehicles - End-of life vehicles - Part 2: Hazardous substances - Requirements and vehicle ranking

2

.

MS 2563:2014

ISC O : Organisational Management

1

.

MS 2550:2014

Cleaning performance - Commercial and public buildings

ISC P : Metallic Materials and Semi-Finished Products

1

.

MS 2543:2014

Electrolytic zinc-coated steel sheet and strip

2

.

MS EN 10080:2014

Steel for the reinforcement of concrete - Weldable reinforcing steel - General

3

.

MS ISO 13887:2014

Cold-reduced steel sheet of higher yield strength with improved formability (ISO 13887:2011, IDT)

4

.

MS ISO 14590:2014

Cold-reduced steel sheet of high tensile strength and low yield point with improved formability (ISO 14590:2005, IDT)

5

.

MS ISO 4960:2014

Cold-reduced carbon steel strip with a mass fraction of carbon over 0.25 % (ISO 4960:2007, IDT)

6

.

MS ISO 5001:2014

Cold-reduced carbon steel sheet for vitreous enamelling (ISO 5001:2012, IDT)

ISC R : Medical Devices and Facilities for Healthcare

1

.

MS 2561:2014

Radiation protection and performance evaluation of PET-CT imaging - Guidelines

ISC S : Electrical and Electronics Equipments and Accessories

1

.

MS 2436-2-4:2014

Alarm systems - Intrusion and hold-up systems - Part 2-4: Requirements for combined passive infrared and microwave detectors

2

.

MS 2436-2-6:2014

Alarm systems - Instrusion and hold-up systems - Part 2-6: Opening contacts (magnetic)

3

.

MS 2436-2-7-1:2014

Alarm systems -Intrusion and hold-up systems - Part 2-7-1: Intrusion detectors - Glass break detectors (acoustic)

4

.

MS 2436-2-7-2:2014

detectors (passive)

5

.

MS 2436-4:2014

Alarm systems - Intrusion and hold-up systems - Part 4: Warning devices

6

.

MS 62471-2:2014

Photobiological safety of lamps and lamp systems - Part 2: Guidance on manufacturing requirements relating to non-laser optical radiation safety

7

.

MS IEC 60034-2-1:2014

Rotating electrical machines - Part 2-1: Standard methods for determining losses and efficiency from tests (excluding machines for traction vehicles) (IEC 60034-2-1:2007, IDT)

8

.

MS IEC 60034-30:2014

Rotating electrical machines - Part 30: Efficiency classes of single-speed, three-phase, cage-induction motors (IE-code) (IEC 60034-30:2008, IDT)

ISC U : Food, Food Products and Food Safety

1

.

MS 2565:2014

Halal packaging - General guidelines

ISC W : Occupational Safety and Health

1

.

MS 2552:2014

Respiratory protective devices - Mouthpiece assemblies - Requirements, testing, marking

2

.

MS 2553:2014

Respiratory protective devices - Particle filters - Requirements, testing, marking

3

.

MS 2554:2014

Respiratory protective devices - Gas filter(s) and combined filter(s) - Requirements, testing, marking

ISC Y : Quality Management and Quality Assurance

1

.

MS ISO 10004:2014

Quality management - Customer satisfaction - Guidelines for monitoring and measuring (ISO 10004:2012, IDT)

2

.

MS ISO 10018:2014

ISC Z : Environmental Management

1

.

MS 2547:2014

Landfill safe closure - Requirements

2

.

MS 2564:2014

Performance criteria and test procedures for continuous emission monitoring systems (CEMS)

Revised Malaysian Standard (1

st

Revision)

ISC B : Chemicals and Materials

1

.

MS 1526:2014

Floor liquid detergents - Specification (First revision)

2

.

MS 174:2014

Formic acid - Technical grade - Specification (First revision)

3

.

MS 177:2014

Hydrochloric acid - Technical grade - Specification (First revision)

ISC D : Building, Construction and Civil Engineering

1

.

MS 2282-1:2014

Masonry units - Specification - Part 1: Fired clay masonry units (First revision)

2

.

MS EN 450-1:2014

Fly ash for concrete - Part 1: Definition, specifications and conformity criteria

3

.

MS EN 450-2:2014

Fly ash for concrete - Part 2: Conformity evaluation

4

.

MS ISO 13006:2014

Ceramic tiles - Definitions, classification, characteristics and marking (First revision) (ISO 13006:2012, IDT)

ISC E : Generation, Transmission and Distribution of Energy

1

.

MS IEC 61000-3-2:2014

Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current <= 16 A per phase) (First revision) (IEC 61000-3-2:2009, IDT)

2

.

MS IEC 61000-4-30:2014

quality measurement methods (First revision) (IEC 61000-4-30:2008, IDT)

ISC F : Mechanical Engineering

1

.

MS 2560:2014

Gas cylinders - Safe handling (First revision) (ISO 11625:2007, MOD)

2

.

MS ISO 225:2014

Fasteners - Bolts, screws, studs and nuts - Symbols and descriptions of dimensions (First revision) (ISO 225:2010, IDT)

3

.

MS ISO 4306-1:2014

Cranes - Vocabulary - Part 1: General (First Revision) (ISO 4306-1:2007, IDT)

4

.

MS ISO 4310:2014

Cranes - Test code and procedures (First revision) (ISO 4310:2009, IDT)

ISC I : Halal Standards

1

.

MS 1900:2014

Shariah-based quality management systems - Requirements with guidance(First revision)

ISC L : Road Vehicles

1

.

MS 1439:2014

Definitions of common terms used in the tyre industry - Pneumatic tyres (First revision)

2

.

MS 932:2014

Motorcycles - Rear view mirrors - Specification and installation (First revision)

ISC N : Rubber and Rubber Products

1

.

MS ISO 34-1:2014

Rubber, vulcanized or thermoplastic - Determination of tear strength - Part 1: Trouser, angle and crescent test pieces (First revision) (ISO 34-1:2010, IDT)

ISC S : Electrical and Electronics Equipments and Accessories

1

.

MS 1597-2-5:2014

Household and similar electrical appliances - Safety - Part 2-5: Particular requirements for dishwashers (First revision) (IEC 60335-2-5: 2008, MOD)

2

.

MS 60335-2-98:2014

humidifiers (First revision) (IEC 60335-2-98: 2008, IDT)

3

.

MS IEC 60034-3:2014

Rotating electrical machines - Part 3: Specific requirements for synchronous generators driven by steam turbines or combustion gas turbines (First revision) (IEC 60034-3:2007, IDT)

4

.

MS IEC 60034-4:2014

Rotating electrical machines - Part 4: Methods for determining synchronous machine quantities from tests (First revision) (IEC 60034-4:2008, IDT)

5

.

MS IEC 60335-2-101:2014

Household and similar electrical appliances - Safety - Part 2-101: Particular requirements for vaporizers (First revision) (IEC 60335-2-101: 2008, IDT)

6

.

MS IEC 60335-2-12:2014

Household and similar electrical appliances - Safety - Part 2-12: Particular requirements for warming plates and similar appliances (First revision) (IEC 60335-2-12: 2008, IDT)

7

.

MS IEC 60335-2-85:2014

Household and similar electrical appliances - Safety - Part 2-85: Particular requirements for fabric steamers (First revision) (IEC 60335-2-85:2008, IDT)

ISC U : Food, Food Products and Food Safety

1

.

MS 547:2014

Fresh, chilled and frozen pork - Specification (First revision)

ISC W : Occupational Safety and Health

1

.

MS 2558:2014

Safety and health signage used in the workplace - Specification (First revision)

2

.

MS ISO 13849-2:2014

Safety of machinery - Safety-related parts of control systems - Part 2: Validation (First Revision) (ISO 13849-2:2012, IDT)

ISC Y : Quality Management and Quality Assurance

1

.

MS ISO 19011:2014

Guidelines for auditing management systems (First revision) (ISO 19011:2011, IDT)

Revised Malaysian Standard (2

nd

Revision)

1

.

MS 1285:2014

Glass cleaner - Specification (Second revision)

2

.

MS 791:2014

Liquid detergent for household hand dish washing - Specification (Second revision)

ISC D : Building, Construction and Civil Engineering

1

.

MS 1525:2014

Energy efficiency and use of renewable energy for non-residential buildings - Code of practice (Second revision)

ISC F : Mechanical Engineering

1

.

MS 1315-1:2014

Office furniture - Storage furniture - Part 1: Safety requirements (Second revision)

2

.

MS 1315-2:2014

Office furniture - Storage furniture - Part 2: Determination of stability and strength of the structure (Second revision)

3

.

MS 771:2014

Automotive leaf spring - Specification (Second revision)

ISC J : Plastics and Plastics Products

1

.

MS 1421:2014

Test method for haze and luminous transmittance of transparent plastics (Second revision)

ISC P : Metallic Materials and Semi-Finished Products

1

.

MS 1196:2014

Continuous hot-dip aluminium/zinc alloy-coated sheet of commercial, drawing and structural qualities (Second revision)

ISC R : Medical Devices and Facilities for Healthcare

1

.

MS ISO 15189:2014

Medical laboratories - Requirements for quality and competence (Second revision) (ISO 15189:2012, IDT)

ISC S : Electrical and Electronics Equipments and Accessories

1

.

MS 1597-2-75:2014

Household and similar electrical appliances - Safety - Part 2-75: Particular requirements for commercial dispensing appliances and vending machines (Second revision) (IEC 60335-2-75:2012, MOD)

2

.

MS 60335-2-25:2014

Household and similar electrical appliances - Safety - Part 2-25: Particular requirements for microwave ovens, including combination microwave ovens (Second revision) (IEC 60335-2-25: 2010, IDT)

3

.

MS IEC 60335-2-11:2014

Household and similar electrical appliances - Safety - Part 2-11: Particular requirements for tumble dryers (Second revision) (IEC 60335-2-11:2012, IDT)

4

.

MS IEC 60335-2-14:2014

Household and similar electrical appliances - Safety - Part 2-14: Particular requirements for kitchen machines (Second revision) (IEC 60335-2-14:2008, IDT)

5

.

MS IEC 60335-2-31:2014

Household and similar electrical appliances - Safety - Part 2-31: Particular requirements for range hoods and other cooking fume extractors (Second revision) (IEC 60335-2-31:2009, IDT)

6

.

MS IEC 60335-2-32:2014

Household and similar electrical appliances - Safety - Part 2-32: Particular requirements for massage appliances (Second revision) (IEC 60335-2-32:2008, IDT)

7

.

MS IEC 60335-2-36:2014

Household and similar electrical appliances - Safety - Part 2-36: Particular requirements for commercial electric cooking ranges, ovens, hobs and hob elements (Second revision) (IEC 60335-2-36:2008, IDT)

8

.

MS IEC 60335-2-43:2014

Household and similar electrical appliances - Safety - Part 2-43: Particular requirements for clothes dryers and towel rails (Second revision) (IEC 60335-2-43: 2008, IDT)

9

.

MS IEC 60335-2-65:2014

Household and similar electrical appliances - Safety - Part 2-65 : Particular requirements for air-cleaning appliances (Second revision) (IEC 60335-2-65:2008, IDT)

10

.

MS IEC 60335-2-73:2014

Household and similar electrical appliances - Safety - Part 2-73: Particular requirements for fixed immersion heaters (Second revision) (IEC 60335-2-73: 2009, IDT)

Revised Malaysian Standard (3

rd

Revision)

1

.

MS 1225-1:2014

Polyethylene (PE) tanks for cold water storage - Part 1: Capacity up to 600 gal (third revision)

ISC N : Rubber and Rubber Products

1

.

MS 671:2014

Elastomeric bridge bearings - Specification and design (Third revision)

ISC S : Electrical and Electronics Equipments and Accessories

1

.

MS IEC 60335-2-6:2014

Household and similar electrical appliances - Safety - Part 2-6: Particular requirements for stationary cooking ranges, hobs, ovens and similar appliances (Third revision) (IEC 60335-2-6: 2008, IDT)

Revised Malaysian Standard (4

th

Revision)

ISC P : Metallic Materials and Semi-Finished Products

1

.

MS 144:2014

Steel wire for the reinforcement of concrete products - Specification (Fourth revision)

2

.

MS 145:2014

Steel fabric for the reinforcement of concrete - Specification (Fourth revision)

3

.

MS 146:2014

Steel for the reinforcement of concrete - Weldable reinforcing steel - Bar, coil and decoiled product - Specification (Fourth revision)

ISC S : Electrical and Electronics Equipments and Accessories

1

.

MS IEC 60335-2-9:2014

Household and similar electrical appliances - Safety - Part 2-9: Particular requirements for grills, toasters and similar portable cooking appliances (Fourth revision) (IEC 60335-2-9:2008, IDT)