• No results found

OPTIMIZATION OF TENSILE STRENGTH OF PULTRUDED GLASS FIBER COMPOSITE

N/A
N/A
Protected

Academic year: 2020

Share "OPTIMIZATION OF TENSILE STRENGTH OF PULTRUDED GLASS FIBER COMPOSITE"

Copied!
10
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Fig. 4(a): Pultruded GFRP Composite Tensile test Specimen According to ASTM D638
Table 2—Taguchi L9 OA with responses (raw data and S/N ratios)
Table 3 Average values and main effects of tensile strength of composite

References

Related documents

Revocation of users is done for following situations: 1) For public domain users revocation of one or more role attributes; ; 2) revoking public domain user is as same as to

The hardness profile indicates a decrease in the weld hardness as shown in the Fig 4 and this has been attributed to the dissolution of precipitates into solution and subsequently

This selection was based on the fact that: (1) the clinical data were clear, compelling, and consistent with objective clinical indicators such as the vaginal maturation

Newton’s main point to Schurmann and Martinelli was that the changes associated with reactionary intercommunalism, chiefly its technological displacement of jobs and the

Hindawi Publishing Corporation EURASIP Journal on Wireless Communications and Networking Volume 2007, Article ID 51358, 11 pages doi 10 1155/2007/51358 Research Article Multiple

RESEARCH Open Access Green radio despite ?Dirty RF? front end Myriam Ariaudo1*, Inbar Fijalkow1, Jean Luc Gautier1, Mathilde Brandon1,2, Babar Aziz1 and Borislav Milevsky1 Abstract In

York Trials Unit, Department of Health Sciences, University of York, York, UK; 2 Leeds Institute of Rheumatic and Musculoskeletal Medicine, University of Leeds, Leeds, UK; 3 NIHR

Remark that any ordinary tensor field on the base manifold may be thought of as an M -tensor field on T M , having the same type and with the components in the induced local chart on T