• No results found

Forging Plant Processes Energy Conservation by Energy Audit Approach-A Case Study

N/A
N/A
Protected

Academic year: 2020

Share "Forging Plant Processes Energy Conservation by Energy Audit Approach-A Case Study"

Copied!
9
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Fig. 5 Methodology

References

Related documents

The observed hydraulic conductivity and compressibility responses were used to select the optimum tire chips size and aspect ratio for the possible use as drainage layer material

Constrained by limited data, we have used a parsimonious specification in which log of growth rate of GDP per capita is estimated by a smaller number of explanatory variables, that

Detailed characteristics of the two excited resonant modes have been studied, and good radiation characteristics of the proposed antenna for frequencies over the whole DTV band

• Jollibee system wide sales increased to P8.29 billion which translates to a market share of more than 50% among all hamburger fast food chains... • Jollibee had 208

Figure 3 The femoral torsion is determined by plotting a reference line through the transcondylar plane of the distal femur, and superimposing a second line through the axis of the

Two sets of dynamic displacements of the footbridge in three directions were derived from both the composite instrument and accelerometer data, which were depicted

Conclusions: The three-day survival training combined with sleep deprivation negative affected on the coordination motor performance (handgrip differentiation, body

TBK1 LoF variants have been reported in more than 10 cohorts so far (Table 1), including approximately 1.6% patients with familial ALS and 0.4% patients with sporadic ALS..