• No results found

Design of Single-Stage Balanced Forward-Fly back Converter

N/A
N/A
Protected

Academic year: 2020

Share "Design of Single-Stage Balanced Forward-Fly back Converter"

Copied!
11
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Fig. 1 Single-stage flyback converter
Fig. 3 Circuit diagram of the proposed forward-flyback converter
Fig. 5 Output voltage (��) waveform of flyback converter
Fig. 7 Simulation Model of Forward Converter (���= 90����)
+6

References

Related documents

Field experiments were conducted at Ebonyi State University Research Farm during 2009 and 2010 farming seasons to evaluate the effect of intercropping maize with

The Bernoulli and Dirac optimal seeds, for single seeds of weight 11 and span ≤ 22 , over the match probability or the match frequency of each model (x-axis), and on any

The predictor variables (cat- egories are shown in parenthesis) used in this study as: age (15 – 19, 20 – 29, 30 – 39, 40 – 49 years); Place of resi- dence (Urban/Rural)

scan News Chief Newsroo m hard copy Schedule 1, Item 58 Destroy when no longer needed. Purchase Request News Chief

cerevisiae vps4 D cells carrying a Snf1-GFP fusion plasmid, along with the Vps32 fusion vector, gave diffuse cytoplasmic fluorescence (Figure 1A and supporting information, Figure

Recently, we have shown that Swi1 and Swi3 form a ‘‘replication fork protection complex’’ (FPC) that is required for efficient Cds1 activation and the sub- sequent stabilization

Their experimental results showed that the maximum instantaneous thermal efficiency reached 43.9% for a direct solar radiation of 474 W/m2at a flow rate of 14.4kg/hr, and

It is also observed that as Mach number increases from 0.7 to 0.95, the shock strength reduces hence the shock waves strength also varies with the Mach number. This paper