Finishing Touches. Solid And Engineered Transition. 78" Finished Group (1) Group (2) Group (3) Group (4)

(1)

SKU# Profile

0WB35CL

0FLRD

0ECAP

1 QR

2 TM

3 ORD

$55.99 $59.99

$45.99 $51.99 $55.99 $59.99

Finishing Touch es

End Cap (Overlap) 1-1/8" Or 1-1/4" Depending On Manufacturer Square Nose transition hardwood to carpet or can be used to finish exposed edges.

Available in: 3/8", 1/2", 5/8" profiles.

***Solid flooring above 5/8" thickness may need to be shimmed***

Birch, Red Oak,

AM. Cherry, Hickory,

Maple, White Oak Maple Treatment To match

Acacia, AM. Walnut

B. Jatoba, Cumaru, Tigerwood

Group (1) Group (2) Group (3) Group (4)

78" Finished

$45.99 $51.99 $55.99 $59.99

Quarter Round 3/4" X 3/4"

These are used to finish off exposed edges along cabinetry and wall base.

Solid And Engineered Transition

Description

Tall Wall Base 3-1/2" X 9/16"

These are used to finish off exposed edges along walls and cabinetry.

Reducer (Flush)

2" Or 2-1/4" Depending On Manufacturer Reducers transition hardwood to a lower hard surface

(EX: hardwood to linoleum, tile, or concrete).

Reducer (Overlap) 1-1/2" Or 2" Depending On Manufacturer Reducers transition hardwood to a lower hard surface

(EX: hardwood to linoleum, tile, or concrete).

Available in: 3/8", 5/8" profiles.

***Solid flooring above 5/8" thickness may need to be shimmed***

$45.99 $51.99 $55.99 $59.99

$25.99 $30.99 $33.99 $35.99

$45.99 $51.99

T-Molding 1-3/8"

T-Molding transitions between two hard surfaces of similar height (EX: hardwood to tile).

(2)

Transition, Vents, Installation Essentials Minimum Shipping $35

*Always Use The SKU# Below To Find Product Specs & Pricing

4 THD

5 ESN

6 TXESN

7 OLESN

8 TXOLESN

9 SSN

10 TXSSN

$55.99 $61.99 $65.99 $75.99

$51.99 $55.99 $61.99 $71.99

$55.99 $61.99 $65.99 $75.99

$51.99 $55.99 $61.99 $71.99

$55.99 $61.99 $65.99 $75.99

$51.99 $55.99 $61.99 $71.99

Group (1) Group (2) Group (3) Group (4)

AM. Cherry, Hickory,

Maple, White Oak Maple Treatment To match

B. Jatoba, Cumaru, Tigerwood

$45.99 $51.99 $55.99 $58.99

78" Finished

Finishing Touch es

Solid And Engineered Transition

Smooth Flush Stair Nose (Engineered) 2 -1/2" Or 3" Depending On Manufacturer These are used only to cap stair edges. The rounded edge

creates a lip hanging over the edge of the stair.

Available in: 3/8", 7/16", 1/2", 9/16" profiles.

Hand Scraped Flush Stair Nose (Engineered) 2 -1/2" Or 3" Depending On Manufacturer These are used only to cap stair edges. The rounded edge

creates a lip hanging over the edge of the stair.

Threshold (Overlap) 2"

Square Nose transition hardwood to carpet or can be used to finish exposed edges.

Available in: 3/8", 1/2" profiles.

Description

Smooth Overlap Stair Nose (Engineered) 2" Or 3" Depending On Manufacturer

These are used with floating floors as a cap on the top stair edge then flush stair noses can finish the rest.

Hand Scraped Stair Nose (Solid) 2 -1/2" Or 3" Depending On Manufacturer These are used only as a cap on stair edges. The rounded

edge creates a lip hanging over the edge of the stair.

Hand Scraped Overlap Stair Nose (Engineered) 2" Or 3" Depending On Manufacturer These are used with floating floors as a cap on the top

stair edge then flush stair noses can finish the rest.

Smooth Stair Nose (Solid) 2 -1/2" Or 3" Depending On Manufacturer These are used only as a cap on stair edges. The rounded

edge creates a lip hanging over the edge of the stair.

(3)

Group (1) Group (2) Group (3) Group (4) Group (1) Group (2) Group (3) Group (4)

SKU# Dimensions

H x W x T

AM. Cherry, Hickory, Maple,

White Oak Maple

Treatment To match

B. Jatoba, Cumaru, Tigerwood

H x W x T

$2.90 $2.95 $3.30 $3.42 $4.02

ALL STAIR TREAD AND RISER ORDERS ARE SHIPPED SEPARETELY. THERE WILL BE A FLAT SHIPPING RATE OF $119

***National Flooring Products manufacturers a full line of stair treads, risers, transitions, and floor vents. We can match species, stain color, textures, and sheen level of almost any flooring option we produce. All special orders are non-returnable. All custom orders must have a detailed drawing of what you need. Lead time for production is 4-6 weeks from final sign off date. All of the normal standard drop charges apply. All other freight is included in the price.

11 R

Order In 1" increments.

Minimum 36" up to 96"

________________

Risers Are Finished To 3/4" Thick x 7-1/2" Tall.

Smooth Texture Smooth Texture

$0.89 $1.38

$1.30 $1.68 $1.81 $1.94

Tread s And Risers

12 RST

$2.11

$2.11 $2.69

$1.48

$2.95

13 TT

____________________Tradit

ional Treads Are Finished 1" Thick x 11-1/2 Deep.

Unfinished Stained and Finished

Profile

$2.79

Add $20 For Single Returns Attached Or Add $40 For Double Return Attached ---

PLEASE NOTE: Returns are 1.25" Wide

Add $20 For Single Returns Attached Or Add $40 For Double Return Attached ---

PLEASE NOTE: Returns are 1.25" Wide

$3.17

Wired Brushed/ Hand Scraped

$3.42

$1.66

$2.68

$4.02

$1.44 $1.76 $1.89

Smooth Texture

$1.66 $1.48 $2.05 $2.27

$1.80 $2.18 $2.62

Smooth Texture

$2.18

$2.45 $2.21 $2.79

$3.30

Wired Brushed/ Hand Scraped Wired Brushed/ Hand Scraped

Smooth Texture

$3.17

$2.45 $2.21

Smooth Texture

Unfinished Stained and Finished

Profile

$2.18

$2.06 $2.27

Retro Style 5/8" Solid Stair Treads With 1 1/4" Coving Options Unfinished

Right & Left Hand Returns

Solid Risers

Stained and Finished

No Charge Per Return

*Returns Are Finished Square Edges*

Right & Left Hand Returns

$0.88 $1.26 $1.39

$1.38

Profile 5/8" Tread Thickness 1" Noses

Options

Traditional Style 1" Stair Treads Options

_________________

Retro Treads Are Finished 5/8" Thick x 11-1/2" Deep

With A 1" Nose.

$2.90

(4)

*Always Use The SKU# Below To Find Product Specs & Pricing

SKU# Optional Dampers ^{Red Oak,}

Hickory, Maple,

N/A Red Oak,

N/A

30 FV212 $29 $31 $33 - $46 $50 $53 -

32 FV410 $32 $34 $36 - $51 $55 $58 -

33 FV412 $33 $35 $38 - $53 $57 $60 -

SKU# Optional Dampers ^{Red Oak,}

N/A Red Oak,

N/A

39 SRV212 $24 $27 $28 - $42 $46 $49 -

41 SRV410 $26 $28 $30 - $44 $49 $52 -

42 SRV412 $27 $30 $31 - $47 $51 $54 -

SKU#

30 FV212 (CS) $16.50 $18.50 $16.50 $18.50

32 FV410 (CS) $17.00 $19.00 $17.00 $19.00

33 FV412 (CS) $17.50 $19.50 4" x 12" 3/4"" THICK ONLY Case Ct. 10 $17.50 $19.50

41 SRV410 (CS) 42 SRV412 (CS)

See Below For Case Pricing On Unfinished Vents.

Saving Range 30% to 50% Stocked Species: Hickory, Maple, Red Oak, White Oak, AM.

Walnut

Finishing Touch es

Red Oak, White Oak

Bulk Unfinished Vents

Demension & Case Ct.

2" x 12" 3/4" THICK ONLY Case Ct. 10

4" x 12" 3/4"" THICK ONLY Case Ct. 10

Case Pricing | Flush Mount Vents/Floor Registers Case Pricing | Self Rimming Vents/Floor Registers

**Notice**

Add $6.00

Per Vent Damper Case Price $4.00

(Case Ct. 10)

2" x 12" 3/4" THICK ONLY Case Ct. 10

Demension & Case Ct.

39 SRV212 (CS)

4" x 10"

4" x 12"

Red Oak, White Oak

Self Rimming Vents/Floor Registers Specifications Unfinished

Maple, Hickory See Below For Case Pricing On

Unfinished Vents. Saving

Range 30% to 50% Stocked Species:

Hickory, Maple, Red Oak, White Oak, AM. Walnut

2" x 12"

SKU#

Stained and Finished

Profile

Maple, Hickory, AM. Walnut

Dimensions

**Notice**

Add $6.00

Per Vent Damper Case Price $4.00

(Case Ct. 10)

Dimensions

4" x 10" 3/4"" THICK ONLY Case Ct. 10 4" x 10" 3/4" THICK ONLY Case Ct. 10

Profile

Flush Mount Vents/Floor Registers Specifications Unfinished Stained and Finished

Bulk Unfinished Vents

(Cases QTY10)

2" x 12"

4" x 10"

4" x 12"

(5)

56WCLIP

$31.99

$35.99

$34.99

$14.99

$20.99

$22.99

$23.99

$21.99

$31.99

94" Long

$1.75

94" 7.5MM Vinyl

Specifications

4.5MM SPC

6MM SPC 7.5MM WPC

Vinyl Hot Pressed Vinyl Hot Pressed

54WSQN

TuffCore SPC / WPC Square Nose/ End Cap (Overlap) These transitions TuffCore flooring to carpet or finish exposed

edges (Ex: TuffCore flooring against exterior doors).

Tuffcore SPC / WPC Laminate Clips Clips For Mounting LVP Transitions.

4.5 & 6MM SPC Only

94" Long

94" Long Vinyl Hot Pressed

TuffCore SP C / WPC Transit ions

51WQR

TuffCore SPC / WPC Quarter Round Quarter rounds are used to finish off exposed edges along cabinetry and as wall base.

55WOLSTN

TuffCore SPC Only Overlap Stair Nose

Stair noses are used on floating floors as a cap on stair edges.

53WRD

TuffCore SPC / WPC Reducer (Overlap) Reducers transitions TuffCore to a lower hard surface

(Ex: TuffCore to linoleum, tile, or concrete).

55WFSTN

TuffCore SPC / WPC Flush Stair Nose

52WTM

TuffCore SPC / WPC T-Molding (Overlap) T-molding transitions between two hard surfaces

of similar height (Ex: TuffCore to tile).

6MM SPC

7.5MM WPC Vinyl Hot Pressed

N/A

Vinyl Hot Pressed

Unit Cost

Laminate Transitions

Overall Length

Laminate Smooth Stair Nose (Overlap) Stair noses are used on floating floors as a cap on stair edges.

Description

53LRD

8MM up to

12.3MM

TuffCore Laminate Trans it ions

55LFSTN

Laminate Flush Stair Nose

54LSQN

55LOSTN 51LQR

Direct Pressure

8MM up to

12.3MM

8MM up to

12.3MM

8MM up to

12.3MM

52LTM

Available Thickness Paper Type

Laminate T-Molding T-molding transitions between two hard surfaces

of similar height (Ex: laminate to tile).

Laminate Reducer (Overlap) Reducers transitions laminate to a lower hard surface

(Ex: Laminate to linoleum, tile, or concrete).

Laminate Square Nose/ End Cap (Overlap) These transitions laminate flooring to carpet or finish exposed

edges (Ex: laminate flooring against exterior doors).

Direct Pressure

8MM up to

12.3MM

Direct Pressure

Vinyl Hot Pressed Direct Pressure Laminate Quarter Round Quarter rounds are used to finish off exposed edges along cabinetry and as wall base.

(6)

*Always Use The SKU# Below To Find Product Specs & Pricing

SKU# Profile Roll Cost Unit Cost

*58EPE40 $16 $0.16

*59EVA (N) $29 $0.29

*59IXPE (N) $29 $0.29

*60PVC1510 $27 $0.27

Pricing

Available Thickness Pallet Pricing

Un derlayments

Laminate & Engineered Underlayment Padding

100

$0.19 / SF 5,400 SF Per Pallet

-- $1026 -- FREE FREIGHT ON PALLET ORDERS

AND SAVING OF -- $560 --

100

$0.10 / SF 5,400 SF Per Pallet

AND SAVING OF -- $324 --

100

$0.17 / SF 5,600 SF Per Pallet

AND SAVING OF -- $560 --

100

$0.19 / SF 5,400 SF Per Pallet

AND SAVING OF -- $560 --

56 54

(N) Blue 3N1 Noise Suppressor IXPE Foam Underlayment (With 6 MIL. Vapor Barrier) This pad is one of the highest density foam we offer and has one of the highest sound

absorption ratings on the market. It is an excellent choice for floating installations.

(DO NOT NAIL FLOORING DOWN OVER THIS CUSHION)

(LVP/WPC Approved) Black 3N1 Premium PVC Underlayment

(With 10MIL. Vapor Barrier) Constructed of high-density EVA foam which has an excellent sound

absorption ratings. It is an excellent choice for all luxury vinyl plank/tile, wood,

bamboo, and laminate floating installations.

2N1 Grey Medium Density Foam Underlayment (With 4 MIL. Vapor Retarder) This padding is 33% thicker than your basic white foam. It can be used under laminate and engineered flooring as an economical cushion.

1.5MM High Density

3MM High Density

3MM Medium Density

54 54

(B) Blue 3N1 Noise Suppressor Underlayment (With 6 MIL. Vapor Barrier) This pad is one if the highest density foam we offer and has an excellent sound

absorption ratings on the market. It is an excellent choice for floating installations.

Rolls Per Pallet SQ. FT.

Roll Size

Specifications

Description

(7)

70ABUP

71SPLINE

72PWA

74PLPPA

75TMSP

77WMM

Wagner Moisture Meter MMC220 Our most popular model for wood flooring and woodworking applications. The MMC220 moisture meter is

ideal for measuring moisture in all wood species; from rare tropical species to domestic species. For flooring or cabinet installers, manufacturers, inspectors or lumber suppliers; the MMC220 offers a complete and portable

solution. It's easy to use and programmable to multiple species or ranges. Wagner Meters' IntelliSense™

Technology ensures that the MMC220 measures deeply INSIDE the wood for a true moisture reading without

damage to the wood surface and without interference from surface moisture.

1

Taylor MS Plus Advance Wood Floor Adhesive Taylor MS Plus wood flooring adhesive with Meta-tec® technology, is a one component 100% solids, cross

linking, MS polymer-based adhesive formulated for the interior installation of engineered wood plank, acrylic impregnated plank, bamboo and pre-finished and unfinished solid wood flooring. MS Plus also has good

concrete moisture inhibition capability as well as good sound reduction properties.

175-200 Sq. Ft. Per Pail For Regular Glue Down

110-125 SQ. FT. Per Pail For Moisture Block And Glue Down

PL Premium Polyurethane Adhesive Premium Polyurethane Construction Adhesive is a one component, polyurethane based, moisture-curing

adhesive. It is VOC compliant. This adhesive has superior adhesion to most common construction materials and is three times as strong as conventional solvent based construction adhesives. It is paintable and cures even

in cold temperatures, which makes it ideal for sub floors and stair tread installations.

Comes with 1 MMC200 Moisture Meter, 1 Heavy Duty Nylon Carrying Case, Complete

Guide

1 Meter

$368.75

28 OZ Tubes Installs 3 -6 36"Treads And Risers.

I nstall ati on Es sen ti als

Engineered & Solid Sundries Specifications

4 Gallon Pails

Description Coverage

Per Unit

Aqua Bar Underlayment Membrane (B) Paper Is an extremely effective vapor retarder for use under solid and engineered wood flooring. It is cleaner and

easier to handle when compared to roofing felt or ploy film. Aqua bar "B" slows moisture migration down and is a superior vapor retarder. It is not a waterproof membrane.

500 Sq. Ft. Per Roll (Coverage 425 SF. Per Roll If Overlapped 6")

Solid Or Engineered Splines Hardwood flooring slip tongue/splines are used by wood flooring installers to change direction in the laying of

tongue and groove wood flooring. Be sure to specify what product you need the splines for.

NFP Premium Wood Adhesive (PVA) This is ideal for gluing together engineered tongue and groove floating floors because of it's strong initial tack,

Quick set-speed, superior 3750 PSI bond strength and excellent sandability. 65-75 SQ. FT. Per Bottle

Per Bottle 16 Bottles Per Case 50 Linear Feet Available Thickness 3.25mm, 3.5mm, 4.25mm, 5.25mm,6.25mm

25 PC X 24"

Lengths

Quantity Unit Cost

$24.51

$23.13

16 Oz For Flooring Material

5"Wide x 1/2"Thick __________________

$8.93

$8.48

____________________________________

$167.50

(8)

*Always Use The SKU# Below To Find Product Specs & Pricing

SKU#

80TAS

81FTM

89FBRD

90TSL

91CCK

92DT

93PBK

94CIG

95PLB

96PSS

Underlayment Padding Sample Set Underlayment Chain Set Includes:

Complete NFP Underlayment and Padding Options #57 to #62.

$5.00

NFP Product Lineup Brochure

Pieces Sold Separately

Free

Radiant Heat Sensor Labels

These WarmMark Time/Temperature indicators are required for all wood floors installed over radiant heat substrates. These devices monitor whether a product has been exposed to termperatures above a

86 degree threshold. For proper installation, place directly over heat

source and 4' away from exterior walls.

Package Includes:

2 - Temperature sensors 1 is required for every 300 SQ. FT.

Size: 3/4" X 1 3/4"

$9.99

Specifications

Binder Includes:

1 - NFP Price Book, NFP Product Lineup Booklet, 4 Manufacturer

Complete Product Guides

$11.75

$4.24

Contents

Care Kit (À la carte) A basic care kit for Hardwood, Laminate, or LVP/WPC. The kit

offers a technical guide for understanding the new flooring and

several basic supplies for care and maintenance.

Kit Includes:

1- Tibet Almond Stick 1 - Pack of Heavy Duty Polyester Furniture Pads (3 sizes)

Furniture Touch-Up Marker(s) Comprehensive Guide to Flooring Ownership

FortiBoard Floor Protection System

Designed & engineered with Contractors in mind. This non-corrugated, heavy duty floor protection

material has excellent water resistance, is lighter weight than other competitive floor protection boards and is made from

100% recycled materials. Rolls out flat and fast and may

contribute up to 2 LEED points toward USGBC Certification.

1 - Roll 38" x100' Coverage: 317 SQ. FT. per roll

$47.46

Furniture Touch-up Markers

Instantly hide nicks & scratches on wood, wood-veneer furniture and wood trims. Simple to apply - just draw over the scratch, scuff, or

discolored spot & watch them disappear permanently. The tight-seal cap keeps markers fresh and colors vibrant.

Available In The Following Stain Options:

(Natural Tones Light Oak, Natural Oak) (Red Tones Cherry Mahogany, Natural Cherry)

(Dark Tones Dark Mahogany )

I nstall ati on Es sen ti als

Product Brochure:

48 Page Brochure With Photos & Labels Of Actual Samples. Products Are

Broken Into Sets For Easy Ordering.

$3.00

NFP Display Tower 1 Complete NFP Display Tower. Displays 10 Samples 18 X 18.

Display Includes:

1 Display Tower, 10 Metal Shelves, NFP Header

$99.00

NFP Price Book Binder

1 Complete NFP Price Book. With All Product Guides.

$9.38

Unit Cost

Profile Description

$14.99 Includes Shipping

---

$7.99 With Order

NFP Complete Installation Guides Installation Guides Available : Wood Guide, TC Laminate Guide, TC WPC Guide, TC SPC Guide

Zenith Tibet Almond Stick This product works miracles on white surface scratches. Simply rub the stick

along the scratch and it disappears! Will not damage the finish, making it ideal for all types of wood flooring or furniture. Not recommended for gouges, deep

scratches or for use on bleached surfaces.

1- 2-7/8" x 1" Almond stick packaged in a sealed metal can.