• No results found

Dual Band Dual Polarized Slot Cut modified Circular Microstrip Antenna

N/A
N/A
Protected

Academic year: 2020

Share "Dual Band Dual Polarized Slot Cut modified Circular Microstrip Antenna"

Copied!
5
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Fig. 1 (a) Top and (b) side views, (c) measured return loss plots [14], simulated (d) resonance curve and (e) input impedance plots for circular slot cut CMSA
Fig. 2 (a, b) Surface current distribution at dual  frequencies, (c) circular slot cut CMSA and its (d)
Fig. 5 (a, b) Variation in dual frequency and their ratio for different circular slot positions and radius and (c) optimized dual band response for slot cut CMSA in 1000 MHz frequency band, (_____) simulated, (___ ___) measured
Fig. 6 (a) Fabricated prototype and (b, c) radiation pattern at dual frequencies for dual band circular slot cut CMSA

References

Related documents

Study of Thickly and Thinly Sectioned Melanoma Skin Tissues Study of Thickly and Thinly Sectioned Melanoma Skin Tissues with Mechanical Scanning Acoustic Reflection Microscopy

The primary function of the intake manifold is to supply the combustion mixture to each stroke of the engine.Even distribution is important to optimize the

After providing the information described above, the emails offered a link to an applicant reactions survey, which measured the mediator and outcome variables of interest in

Figure 5.5: Population specific random effect of 23 genes that shows significant differences among populations ( p < 0.05). Treatment group at which the gene was significant

The strict key avalanche criterion (SKAC) test described in [7] is a test to measure the diffusion characteristics of a cipher, generates a matrix of dimension × , where n is

OFDM reduces BER performance and ISI with using multiplexing and modulation techniques to get higher data rate over wireless channels, the use of multiple antennas at

ubiquitination of TAZ is dependent upon p-TrCP binding at the TAZ

For the case of standard (homogeneous) fracture mechanics specimens like single edge cracked specimen subjected to pure bending SE(PB), three-point bend specimen