• No results found

Shear capacity of non metallic (FRP) reinforced concrete beams with stirrups

N/A
N/A
Protected

Academic year: 2020

Share "Shear capacity of non metallic (FRP) reinforced concrete beams with stirrups"

Copied!
6
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

TABLE I: PROPERTIES OF REINFORCING BARS
TABLE  2: DETAILS OF TEST BEAMS AND VARIABLES
TABLE 3: COMPARISON OF PREDICTED AND EXPERIMENTAL RESULTS
Fig. 5. Comparison of calculated: (a) flexural  and (b) shear capacity with experimental ultimate load

References

Related documents

The intercooled cycles were optimised for minimum fuel burn and it was found that the reversed flow core concept benefits from higher overall pressure ratio and lower fan

The soda pulps from graminaceus plant prepared according to the method in soda pulping experiment section were carboxymethylated and their solubility in water was tested (Table 2)..

The participants agreed that occupational balance is difficult to define or explain, particularly the notion of ‘balance’, and emphasised the individualised and subjective aspects

In practical applications of this stress test procedure, it might sound sensible to assess the impact of a stress scenario on a given credit portfolio as the product of the GCRF beta

This regime shift in the e¤ect the S&P 500 index has on European ETF returns between synchronized and non-synchronized trading hours supports the hypothesis that ETF

For example, the reversal strategy based on returns in formation month 0 and holding period being month 1, yields significant risk-adjusted profits of between 0.5 to 0.63 percent

In sum, we find that growth stocks outperform value stocks on days following increases in the VKOSPI, and that a potential trading rule developed on book-to-market ratios