• No results found

Type-2 fuzzy logic system applications for power systems

N/A
N/A
Protected

Academic year: 2021

Share "Type-2 fuzzy logic system applications for power systems"

Copied!
105
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Figure 2.1: Type-1 Fuzzy Sets
Figure 2.2: Type-2 Fuzzy Sets.
Figure 2.3: Type-2 FLS
Table 3.1: Design Parameters for Algorithms 1 & 2
+7

References

Related documents

This paper summarizes the challenges to effective warranty tracking and management, the direct and indirect benefits of warranty process automation, characteristics

The Reading Eggspress Spelling program is explicit and systematic with a focus on spelling patterns, structure and meaning features.. The lessons allow students to learn,

A sample of 67 Broad Absorption Line quasars (BALQSOs) from the Large Bright Quasar Survey (LBQS) is used to estimate the observed and intrinsic fraction of BAL quasars in

Figure 4 RNA polymerase II (RNAPII) response to the p21 (cyclin-dependent kinase inhibitor 1A gene, also known as CDKN1A ) CCCTC- binding factor (CTCF) proximal

First, the point sources were installed on the focal plane, and we used the MEMS method to fabricate point sources and package them with the image sensor; Second, we integrated

Yet, as changes in biogas production and composition can have various causes (not always process stability problems) they should always be interpreted together with the

neutralization of the concrete, predominantly bY. reaction with atmospheric carbon dioxide. Concrete is an ideal environment for steel but the increased use of deicing