• No results found

Automating the Lower and Higher Normal Form Process for the Database Systems

N/A
N/A
Protected

Academic year: 2020

Share "Automating the Lower and Higher Normal Form Process for the Database Systems"

Copied!
6
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Table 1: Employee
Table 8: EmpNP ( Name, Project)
Fig 1: The main interface
Fig 13: The table in 5th form

References

Related documents

Table 5.5 The increase in barrier height relative to the minimum barrier sites on Pt(211). This approach is used to

The trend appears to be that aneurysms with a large neck angulation are more likely to result in greater drag forces acting on the stent-graft in the anterior direction while

The maximum shear stress values were calculated in three distinct segments of the SG erenal artery ( Fig. 5): the SG segment originating from the EG main body and mating the

HVI-Certified loudness ratings are uniquely consistent because each certified product has been tested in the HVI-designated test laboratory, using the laboratory’s

Following an introduction about the theoretical formulation of the Acoustic Analogy approach based on the Lighthill’s equation, the thesis is focused on the development of a

For that, we explored different aspects of the rolling phenomenon (physical, perceptual and signal morphology) and we concluded on the relevance of the following attributes :

In the context of this research, it is extremely important to answer these questions as corpus-based concatenative sound synthesis (the method of sound synthesis used