• No results found

Effects of Different Orifice Structure on Heat Transfer Characteristics of Steel Strip Surface in an Air Impinging Freezer

N/A
N/A
Protected

Academic year: 2020

Share "Effects of Different Orifice Structure on Heat Transfer Characteristics of Steel Strip Surface in an Air Impinging Freezer"

Copied!
10
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Figure 1. Model of impinging freezing experiment table.
Figure 4. Nusselt number distribution of steel strip under different diameters  (a. D=8mm, b
Figure 7. Local area-averaged row Nusselt number under different diameters.
Figure 10. Z-velocity distribution on the steel strip surface.
+4

References

Related documents

19% serve a county. Fourteen per cent of the centers provide service for adjoining states in addition to the states in which they are located; usually these adjoining states have

Effect of the pH value of aqueous buffer, concentration of chiral additive, composition of mobile phase, and column temperature on the enantioseparation of Tedizolid phosphate

Field experiments were conducted at Ebonyi State University Research Farm during 2009 and 2010 farming seasons to evaluate the effect of intercropping maize with

The objective of our study was to isolate starch from fresh root, dry chips dry milled and dry chips wet milled cassava through different methods and to determine the

Following perfusion with acid compared to saline, all subjects showed significant decreases in FEV1 and PEFR and significant increases in the mean valsalva ratio and heart

It was decided that with the presence of such significant red flag signs that she should undergo advanced imaging, in this case an MRI, that revealed an underlying malignancy, which

1D, 2D, 3D: one, two, three dimensional; ASD-POCS: adaptive-steepest-descent-projection-onto-convex-sets; CBCT: cone beam computed tomography; CG: conjugate gradient; CT: