• No results found

DWT ANN Based Analysis of Inrush and Fault Currents in Power Transformers

N/A
N/A
Protected

Academic year: 2020

Share "DWT ANN Based Analysis of Inrush and Fault Currents in Power Transformers"

Copied!
7
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Fig. 1: Two band Multi-resolution analysis of Signal
Fig 5 and Fig. 6 shows the FFT of the obtained inrush current and fault current which is analyzed and further used for improvisation of differential relay
Fig. 6 FFT of Fault condition
Fig. 11 Simulation of ANN in MATLAB SIMULINK

References

Related documents

Mid-career Survey: Institute of Contemporary Art, Philadelphia, Pennsylvania; travelled (2004) to Contemporary Arts Center, Cincinnati, OH; Kemper Museum of Art, Kansas City,

 High/Low pressure switches shall be installed immediately downstream of the source valve  Main Line gauges required adjacent to pressure switches..  Switches / Gauges

Considering that trabecular bone may act as a scaffold to support and constrain the bone cortex from the inside during impact, we hypothe- size that the failure pattern of

Therefore, when this DLL file is executed, our danger.exe file will be run and we should get an elevated reverse shell rather than spawning a command prompt within the remote

The extension of empirical scientific approaches throughout the natural, medical, and social sciences during the early nineteenth century shaped surgeons’ approach to their

The study was conducted at Humera agricultural research centre farm, northern Ethiopia aimed to evaluate the effects of supplementation of cowpea ( Vigna unguiculata ) hay

Although the cover of native and in- troduced species had decreased slightly and species richness had increased slightly after two years, after seven years neither cover nor

The addition of 5% M T I R as a compatibilizer to the whole composite improved the mechanical and the physical properties and increased the flow temperature and the