• No results found

Printed Drop Shaped Monopole Antenna

N/A
N/A
Protected

Academic year: 2020

Share "Printed Drop Shaped Monopole Antenna"

Copied!
5
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Figure 1.  Structure of proposed antenna. L=20.32mm. W=19.87mm.
Figure 5. VSWR curve
Figure 10. Drop shaped antenna undergoing tests in Anechoic Chamber.
Figure 11. Elevation pattern of the simulated and measured designs at a) 2.42 GHz, 3.5 GHz b) 3.5GHz, 4.5GHz   c) 4GHz, 6GHz

References

Related documents

things and artifacts to posit that artifacts have internal teleology just as living

Thus the physical and mechanical properties of Geogrid were found to considerably increase the Compressive and Flexural strength of Aerated light weight concrete

Sakir tasdemir (iccs & tech-2008) Prediction using artificial neural network,AISI 1040 steel in dry cutting condition, Surface roughness of Turning process, parameters:

people lived in rural areas, often far away from the major cities of the Netherlands. Throughout the war, they always seemed to have enough to eat, although

Because an understanding of pesticide educators‘ mental models for pesticide risk is critical in communicating risk to this population, assessing pesticide educators‘ beliefs about

Study Title: Examining the Impact of Race in the Recruitment, Placement, and Retention of African- American Male Principals in Rural North Carolina School Districts: A Qualitative

Addition of the diluents to the fuel stream had a pronounced effect on both the soot surface temperatures and soot volume fractions, with helium diluted flame and carbon dioxide

I understand the information provided for the studyOf Chinese Immigrant Parents’ Communication with Their Children’s School Teachers: Experiences, Expectations and Challenges