EVENT
BRANDING
LITHO
PRINTING
DIGITAL
PRINTING
LARGE
FORMAT
EXHIBITION
SOLUTIONS
FABRIC
PRINTING
43 Plains Road, Mapperley,
Nottingham NG3 5JU
0115 837 8874
nottingham@minutemanpress.com
WELCOME
Our goal is to offer you a superior service combining quality printing and exhibition solutions at very competitive prices, delivered on time. We are committed to you and it is our aim to ultimately meet your needs.
You will find a wealth of information regarding outdoor flags, portable displays, exhibition solutions and printing services. We provide a flexible, creative and innovative communications solution through a wide range of printed media. However, we don’t just want you to take our word for it, you can only gauge how good our service is by first hand experience. It has been a challenging task to ‘cherry pick’ the best value products demonstrated in this catalogue.
Now that it has finally been completed we hope you will find it resourceful, useful and informative. It’s crammed full of a variety of products and services, that will help you make the best possible choices and may also give you some creative ideas in the process.
We have laboured intensely to create a business that provides a friendly customer service and quality products. Our focus remains to ensure you receive a high level of service giving you the confidence to choose our products time after time. We are very proud of what we have already achieved and hope we can continue to provide a quality experience to all our customers.
Finally, we would like to thank all those customers that have used our services regularly over the years. We never take your valued custom for granted and will do all we can to ensure your business goes from strength to strength along with ours. We couldn’t have come this far without you and we hope to continue this journey with both old and new customers for years to come.
CONTENTS
DISPLAY
SOLUTIONS
HANDBOOK
Rhino Flag poles and Accessories Feather Flags & Tear Drop Flags Gazebo Packages
Expovision Roller Banner Stand Roller Banners
Tension banner Stands
Outdoor Banners & Atlas AD Flag Desk Top Banner & Flags
Vision Roller Banner Bundle & Curved Banner Stand Pop-up Display Bundles L Shaped Corner Pop-up Kits Fabric Pop-up System & Fabric Counters
Exhibition Display Stands (Custom Stands) Twist Display Systems
Linear Vector Displays Linear Modular Displays Formulate Wall Systems Fabric Display Stands
Monsoon Frame & Pop-out banners Wind dancer & Back Pack Flags Tablecloths & Custom Printed Flags
Pop-up Counter & Physique Flag Counter Kit Promo Counter & Oyster Counter
Table holders, Graphic Pods & iPad Lightboxes Snap frames & Poster Rails
Pin Boards, Dry Wipe Magnetic Boards, Cork Boards LED Lightboxes and Floor Standing Snap frames Pavement Signs – A-Boards, Forecourt Signs & Swinger Portable Literature Stands
Life Size Standees & Café Banners Digital & Litho Printing Services
03 04-05 06 07 08-12 13 14 15 16 17-18 19 20-22 23-24 25-26 27 28 29 30 31 32 33 34 35 36 37 38 39-41 42 43 44-45
Rhino is a branded product of Aluminium flag poles, bases and accessories.
With Rhino, our aim is to
offer you superior design, quality, strength, stability and reliability in a brand you can trust. Amongst our
customers are some of the well known design agencies, event management companies, promotional
distributors and printed flag manufactures. Feather/Teardrop flags are ideal for Charities, Hospices,
Councils, Schools, Exhibitions, and all outdoor and indoor promotional POS displays.
We offer high quality flags
printed in full colour on durable poly
knitted fabric, finished with an elasticated sleeve.
All Flags are available as Single sided (Mirror Image) or double sided and
finished to the highest of standards.
UNITED KINGDOM
MANUFACTURED
Ideal branding solution for outdoor and indoor events, exhibitions and retail outlets.
Highly visible branding solution Choose from 5 base options
Reinforced, yet lightweight aluminium pole is available in 4 heights: 2.3m, 3.2m 4.15m & 5.1m
Printed on Knitted polyester flag
Image reads correctly one side, with reverse image as show through Indoor or outdoor use
All products individually packaged in cartons
FEATHER
F
GS
F
UNITED KINGDOM MANUFACTURED PRINTED FLAGSChoose a pole size Choose a base
Choose a carry bag (if required) FOLLOW THESE EASY STEPS...
2.3m 3.2m 4.15m 5.1m POLE SIZE Small Medium Large Extra Large CODE
Double sided flags available
RFF0230 RFF0320 RFF0415 RFF0510 01 02 03 Ground Spike
Size: 600mm length. Steel with Chrome plate for soft ground - grass, sand, and snow. Weight 1.4kg.
Code: RBGRSPK
Cross Base
Size: 620mm x 620mm. Made from Steel with powder coat and supplied with ground pegs. Weight 2kg.
Suitable for up to 3.2m pole kits with Weighting ring.
Code: RBCRSBA
Weighting Ring
Round Water Bag to use with Cross Base, adds more stability when filled with water (an extra 5kg). Size: Dia 520mm. Made from PVC..
Code: RBWATBA
Rhino Carry Bag
Size: 1300mm x 300mm. Colour: Black Suitable for pole kits, flags, ground spike, cross base and car wheel base.
Code: RBCARBA
2.3m p
ole size
Flag size: 600mm x 1900mmS
3.2m p
ole size
Flag size: 900mm x 2800mmM
4.
15m p
ole size
Flag size: 900mm x 3750mmL
5
.1m p
ole size
Flag size: 900mm x 4700mmX
L
FE A THER C UR VE FE A THER Z OOM FEA THER BOLDIdeal branding solution for outdoor and indoor events, exhibitions and retail outlets.
TEAR DROP
F
GS
T
Highly visible branding solution Choose from 5 base options
Reinforced, yet lightweight aluminium pole is available in 3 heights: 2m, 3m, 4m
Printed on Knitted polyester flag
Image reads correctly one side, with reverse image as show through Indoor or outdoor use
All products individually packaged in cartons
UNITED KINGDOM MANUFACTURED PRINTED FLAGS
Choose a pole size Choose a base
Choose a carry bag (if required) FOLLOW THESE EASY STEPS...
2m 3m 4m POLE SIZE Small Medium Large CODE
Double sided flags available
RTF0200 RTF0300 RTF0400 01 02 03
Rhino Small Water/ Sand Base
Size: 450mm x 460mm x 135mm (Height). Approx 22kg water or 35kg sand.
Suitable for up to 3.2m pole kits.
Rhino Large Water/ Sand Base
Size: 500mm (dia) x 185mm (Height). Approx 33kg water or 50kg Sand.
Code: RBLWA30
Rhino Small Water/Sand Cross Base
Size: 450mm (dia) x 150mm (Height). Approx 15kg water or 25kg sand and supplied with ground pegs.
Suitable for up to 4.15m pole kits.
Car Wheel Base
Powder Coated Steel. Size: 600mm x 220mm. Weight: 4.5kg. Code: RBWHEBA
2m p
ole size
Flag size: 600mm x 1600mmS
3m p
ole size
Flag size: 900mm x 2600mmM
4m p
ole size
Flag size: 900mm x 3600mmL
FLAGS AVAI BLE IN THE ABOVE SHAPES...
TE AR C UR VE TE AR S QU ARE TE AR DROP
3x3 GAZEBO
PACKAGE DEALS
Stand out from the crowd with an eye catching customised Pop up Gazebo or Event tent by creating an unrivalled advertising medium whether you are generally promoting your business or just personalising your product.
We can print a design of your choice whether its just your business name on the valance or an design completely covering the roof and sides of your pop up gazebo, whatever you decide will create an unmatched visual impact wherever you may be. Gazebo printing normally takes up to 10 working days from approval of artwork and we can provide a design service if you do not have your own artwork.
G
R
RHINO
GAZEBO KIT
1
3x3m Rhino aluminum frame 1x Full colour canopy roof
1x Heavy duty wheeled case (gazebo)
1x Set of pegs Code: RGK01
RHINO
GAZEBO KIT
2
3x3m Rhino aluminum frame 1x Full colour canopy roof 4x Full single sided printed walls 1x Heavy duty wheeled case (gazebo)
1x Set of pegs Code: RGK02
RHINO
GAZEBO KIT
3
3x3m Rhino aluminum frame 1x Full colour canopy roof 4x Full single sided printed walls 1x Heavy duty wheeled case (gazebo)
2 x 3.2m feather flags printed single sided With cross base and weighted ring Code: RGK03
R
RHINO
GAZEBO KIT
4
RHINO
GAZEBO KIT
5
RHINO
GAZEBO KIT
6
PRINTED WALL PRINTED WALL PRINTED CANOPY PRINTED CANOPY PRINTED CANOPY PRINTED CANOPY
3x3m Rhino aluminum frame 1x Full colour canopy roof 2x Single sided half height walls 1x Full colour rear wall
1x Heavy duty wheeled case (gazebo)
1x Set of pegs
1x 3.2m Rhino feather flag Printed single sided with small water base
1x Seg counter with fabric wrap Code: RGK04
3x3m Rhino Aluminum frame 1x Full Colour Canopy Roof 1x Full colour rear wall 2x Single sided half height walls 2x 2m Rhino teardrop flags (tied to gazebo)
1x Folded table with printed table cloth 1x Heavy Duty Wheeled Case (gazebo)
1x Set of pegs Code: RGK05
3x3m Rhino aluminum frame 1x Full colour canopy roof 3x Full single sided printed walls 2x 3.2m Rhino feather flag Printed single sided with small Water base
1x Folded table with printed table cloth 1x Heavy duty wheeled case (gazebo)
1x Set of pegs Code: RGK06 PRINTED WALL PRINTED WALL PRINTED CANOPY PRINTED CANOPY PRINTED CANOPY PRINTED CANOPY PRINTED WALL PRINTED WALL PRINTED CANOPY PRINTED CANOPY PRINTED WALL PRINTED WALL TABLE WITH PRINTED T ABLE CL OTH PRINTED CANOPY PRINTED CANOPY PRINTED WALL PRINTED WALL TABLE WITH PRINTED T ABLE CL OTH
OUR
BEST
BUDGET BANNEREXPOVISION
ROLLER BANNER
E
When cost and acceptable quality are important factors our Expovison stand is an attractive option. Designed with budget in mind offering a slightly more basic feel using the 'twist out feet' for stability.
Padded carry bag
2 twist out feet add stability Compact lightweight base
Still includes and hardware guarantee! Graphic Width: 850mm
Visible Graphic Height: 2000mm Install Time in 25 seconds 3.1kg
Typical production times for 1 qty on receipt of artwork Single sided banner
Includes a Carry Case (Foam Padded carry case with Shoulder Strap)
INCLUDES
1 YEAR
WARRANTY
Manufacturers consent, hardware only.
Base Unit Twist Out Feet Padded Carry Bag 180mic Polyprop. Printed using Pigment Lightfast Inks
500gsm Light block PVC So Flat. Printed using Solvent Inks
240mic Stop Light Polyester Film. Finished with protective scratch resistant over laminate finish
Replacement Graphic Service not recommended for the Expovision roller banner. CHOOSE FROM THE FOLLOWING OPTIONS...
01 02 03 OPTION 1 Code: EV850-1 OPTION 2 Code: EV850-2 OPTION 3 Code: EV850-3
WIDE EXPOVISION
ROLLER BANNER
W
Graphic Panel printed on 500gsm Light block PVC So Flat. Printed using Solvent Inks -
Visible Graphic Height: 2000mm
1000mm wide Code: EV1000-1 1200mm wide Code: EV1200-1 1500mm wide Code: EV1500-1 2000mm wide Code: EV2000-1 Visible graphic area 2000mm
M
MINI MOSQUITO
ROLLER BANNER
Mosquito mini roller banner has a visible graphic area of 600mm wide and 1600mm high and is ideal for those with limited space and/or limited budget.
Ideal for retail applications.
Snap rail enables easy graphic changes Twist out feet
Anodised silver finish Carry bag included
GIANT MOSQUITO
ROLLER BANNER
The new 'giant' mosquito very tall roller banner stand is now available and can help you stand out from the competition. This extra large
roller banner stands at up to 3m tall with an incredibly helpful part telescopic pole to aid quick assembly.
Please note that as these are telescopic so you can have a stand that is from 1.7m high up to the maximum 3m height.
Twin twist out feet 3m Tall Banner graphic Part bungee/part telescopic pole 500gsm Light block PVC So Flat Padded bag included
NEW
NEW
850mm (w) Code: GM850-1 1000mm (w) Code: GM1000-1 1200mm (w) Code: GM1200-1 1500mm (w) Code: GM1500-1 2000mm (w) Code: GM2000-1 OPTION 1 600mm (w) Code: MMBS-01 OPTION 2 600mm (w) Code: MMBS-02 OPTION 3 600mm (w) Code: MMBS-02180mic Polyprop. Printed using Pigment Lightfast Inks 500gsm Light block PVC So Flat. Printed using Solvent Inks 240mic Stop Light Polyester Film. Finished with protective scratch resistant over laminate finish
01 02 03 Code: 54gf54g
D
DRAGONFLY 2
ROLLER BANNER
The Dragonfly 2 is a heavy-duty budget double-sided roller banner stand with unobtrusive twist out feet, 3-part pole and canvas carry bag.
Give your promotion maximum impact with this stylish and eye-catching double-sided banner system. Extremely quick to put up and easy to use, this banner system is ideal for any exhibition environment.
Available in 850mm or 1000mm width x 2000mm height Excellent balance and stability
Snap fixing top rail for easy and secure graphic fixing Lightweight construction
Anodised silver finish
Quick to assemble and easy to use Carry bag included
DOUBLE SIDED
option 1 850mm (w) Code: DF2850-01 1000mm (w) Code: 54gf54g option 1 1000mm (w) Code: DF21000-01 Code: 54gf54g Code: 54gf54g 1000mm (w) Code: 54gf54g 1000mm (w) Code: 54gf54g Code: 54gf54g Code: DF2850-02 1000mm (w) Code: 54gf54g option 2 1000mm (w) Code: DF21000-02 Code: 54gf54g 850mm (w) Code: 54gf54g 850mm (w) 1000mm (w) Code: 54gf54g 1000mm (w) Code: 54gf54g Code: 54gf54g Code: DF2850-02 1000mm (w) Code: 54gf54g option 3 1000mm (w) Code: DF21000-03 option 2 850mm (w) option 3 850mm (w)180mic Polyprop. Printed using Pigment Lightfast Inks 500gsm Light block PVC So Flat. Printed using Solvent Inks 240mic Stop Light Polyester Film. Finished with protective scratch resistant over laminate finish
CHOOSE FROM THE FOLLOWING OPTIONS...
01 02 03
ORIENT
ROLLER BANNER
O
This smart roller banner is styled on a highly popular base profile, with a substantial anodised silver casing it provides the perfect combination of design with stability.
2110mm x 800mm visible graphic area Stylish lightweight components Quick to assemble and easy to use Ideal for point of sale, retail or exhibitions Choice of 800mm or 1000mm widths Available in Silver anodised finish Includes quality foam padded carry bag
180mic Polyprop. Printed using Pigment Lightfast Inks 500gsm Light block PVC So Flat. Printed using Solvent Inks
240mic Stop Light Polyester Film. Finished with protective scratch resistant over laminate finish
CHOOSE FROM THE FOLLOWING OPTIONS...
01 02 03 OPTION 1 800mm (w) Code: ORI800-1 OPTION 2 800mm (w) Code: ORI800-2 OPTION 3 800mm (w) Code: ORI800-3
WIDE ORIENT
ROLLER BANNER
W
Graphic Panel printed on 500gsm Light block PVC So Flat. Printed using Solvent Inks
1000mm (w) Code: ORI1000 1200mm (w) Code: ORI1200 1500mm (w) Code: ORI1500 2000mm (w) Code: ORI2000
ORIENT 2
ROLLER BANNER
O
This smart double-sided roller banner with a substantial anodised silver casing provides the perfect combination of design with stability. If you are looking for a stylish stand with a proven track record of reliability, then look no further than the Orient 2 (Double-sided) banner stand.
Stylish lightweight components
Large base that doesn’t require a twist out foot Quick to assemble and easy to use
Ideal for point of sale, retail or exhibitions
Choice of 800mm or 1000mm widths x 2110mm (h) Available in Silver anodised finish
Includes quality foam padded carry bag
OPTION 1 800mm (w) OPTION 2 800mm (w) OPTION 3 800mm (w) OPTION 1 1000mm (w) OPTION 2 1000mm (w) OPTION 3 1000mm (w)
180mic Polyprop. Printed using Pigment Lightfast Inks 500gsm Light block PVC So Flat. Printed using Solvent Inks 240mic Stop Light Polyester Film. Finished with protective scratch resistant over laminate finish
CHOOSE FROM THE FOLLOWING OPTIONS...
01 02 03
180mic Polyprop. Printed using Pigment Lightfast Inks
500gsm Light block PVC So Flat. Printed using Solvent Inks
240mic Stop Light Polyester Film. Finished with protective scratch resistant over laminate finish
CHOOSE FROM THE FOLLOWING OPTIONS...
01 02 03
BLADE LITE
ROLLER BANNER
B
Finished with Stylish Chrome end-plates Adjustable feet on base, for use on uneven floors
Available in 850mm and 1000mm widths Increased internal housing for thicker graphics
Carry Bag with extra padding for durability and protection
Fixed height bungee pole Height 2170mm
Printed using Solvent Inks
EXCALIBER
ROLLER BANNER
Single or double sided Wide footprint for extra Stability Available in 800mm and 1000mm widths Available in anodised silver
Fast graphic change Height 2130mm
Finished with protective scratch resistant over laminate finish
PREMIUM
QUALITY
BARRACUDA
ROLLER BANNER
B
Stylish design and proven reliability makes Barracuda our most popular quality banner stand. Barracuda is the most feature-rich single-sided roller banner available and has been specially designed for maximum convenience and ease of use.
180mic Polyprop. Printed using Pigment Lightfast Inks 500gsm Light block PVC So Flat. Printed using Solvent Inks
240mic Stop Light Polyester Film. Finished with protective scratch resistant over laminate finish
CHOOSE FROM THE FOLLOWING OPTIONS...
01 02 03
Choice of 800mm or 1000mm widths x 2130mm height Secure slide in graphic system
Twist & Lock telescopic pole
Supplied with quality foam padded carry bag Wide footprint for extra stability
OPTION 1 800mm (w) Code: BR800-1 OPTION 1 1000mm (w) Code: BR1000-1 OPTION 2 800mm (w) Code: BR800-2 OPTION 2 1000mm (w) Code: BR1000-2 OPTION 3 800mm (w) Code: BR800-3 OPTION 3 1000mm (w) Code: BR1000-3 OPTION 1 800mm (w) Code: BLR850-1 OPTION 2 800mm (w) Code: BLR850-2 OPTION 3 800mm (w) Code: BLR850-3 OPTION 1 800mm (w) Code: EXR800-1 OPTION 2 800mm (w) Code: EXR800-2 OPTION 3 800mm (w) Code: EXR800-3 OPTION 1 1000mm (w) Code: EXR1000-1 OPTION 2 1000mm (w) Code: EXR1000-2 OPTION 3 1000mm (w) Code: EXR1000-3 180mic Polyprop. Printed using Pigment
Lightfast Inks
500gsm Light block PVC So Flat. Printed using Solvent Inks
240mic Stop Light Polyester Film. Finished with protective scratch resistant over laminate finish
CHOOSE FROM THE FOLLOWING OPTIONS...
01 02 03 OPTION 1 800mm (w) Code: BLR1000-1 OPTION 2 800mm (w) Code: BLR1000-2 OPTION 3 800mm (w) Code: BLR1000-3
Cassette roller banners are stylish banner stand units with quick change cartridge graphics, which makes them ideal for environments where your marketing message changes on a regular basis.
Includes cassette with quality stoplight graphic and padded carry bag. Ideal for retail applications.
CASSETTE
ROLLER BANNERS
C
NEW
Quick change cassette graphics
Cassettes are compatible with both the Budget and Budget Plus base units
Available in 850mm or 1000mm with quality stoplight graphic printed in-house.
Bungee pole
Aluminium base unit with Budget Plus having a larger footprint and adjustable feet
Cassette banners have an advantage as their graphic cartridge is housed independently from the main base unit. This means you can change your graphic as often as you need simply and easily yourself. There is no need to return or replace your banner to have new graphics fitted, simply remove and replace the cartridge for an instant graphic change.
Keep a selection of cartridges at hand to change your message as required, which allows for fast moving promotions.
R
Merlin Osprey Option 1 850mm (w) Code: MCB850-1 850mm (w) Code: 54gf54g Option 1 1000mm (w) Code: MCB1000-1 Option 2 850mm (w) Code: MCB850-2 850mm (w) Code: 54gf54g Option 1 1000mm (w) Code: MCB1000-2 Option 1 850mm (w) Code: MCB850-1 850mm (w) Code: 54gf54g Option 1 1000mm (w) Code: MCB1000-1 Option 2 850mm (w) Code: MCB850-2 850mm (w) Code: 54gf54g Option2 1000mm (w) Code: MCB1000-2 Option 1 850mm (w) Code: MCB850-1 Option 2 850mm (w) Code: MCB850-2 Option 1 850mm (w) Code: OCB850-1 Option 2 850mm (w) Code: OCB850-2 850mm (w) Code: 54gf54g Option 1 1000mm (w) Code: MCB1000-1 850mm (w) Code: 54gf54g Option 1 1000mm (w) Code: MCB1000-2 850mm (w) Code: 54gf54g Option 1 1000mm (w) Code: OCB1000-1 850mm (w) Code: 54gf54g Option 2 1000mm (w) Code: OCB1000-2 850mm (w) Code: 54gf54g Option 1 1000mm (w) Code: MCB1000-1 850mm (w) Code: 54gf54g Option 1 1000mm (w) Code: MCB1000-2 850mm (w) Code: 54gf54g Option 1 850mm (w) Code: CC850-01 850mm (w) Code: 54gf54g Option 1 1000mm (w) Code: CC1000-01 850mm (w) Code: 54gf54g Option 1 1000mm (w) Code: MCB1000-1 850mm (w) Code: 54gf54g Option 1 1000mm (w) Code: MCB1000-2 850mm (w) Code: 54gf54g Option 2 850mm (w) Code: CC850-02 850mm (w) Code: 54gf54g Option 2 1000mm (w) Code: CC1000-02REPLACEMENT
CASSETTE CARTRIDGES
500gsm Light block PVC So Flat. Printed using Solvent Inks 240mic Stop Light Polyester Film. Finished with protective scratch resistant over laminate finish
CHOOSE FROM THE FOLLOWING OPTIONS...
01 02
500gsm Light block PVC So Flat. Printed using Solvent Inks 240mic Stop Light Polyester Film. Finished with protective scratch resistant over laminate finish
CHOOSE FROM THE FOLLOWING OPTIONS...
01 02
WIDEVISION
ROLLER BANNERS
Wide vision roller banners are just like regular pull-up banners, but bigger! Perfect for placing along a wall at an event or exhibition, these banners make a huge impact with minimum fuss.
Widevision roller banner are great option for making a big impression in limited space!
Best of all, it a perfect display stand for placing along a wall at an event or exhibition, these banners make a huge impact with minimum fuss.
W
WIDEVISION
ROLLER BANNER
W
1200mm (w) SILVER Code: WVRB-1200A 1200mm (w) BLACK Code: WVRB-1200B High resolution full colour printed graphic panel onto 500gsm Light block Soflat PVC Standard Graphic Height (approx) 2145mm1500mm (w) SILVER Code: WVRB-1500A 1500mm (w) BLACK Code: WVRB-1500B 2000mm (w) SILVER Code: WVRB-2000A 2000mm (w) BLACK Code: WVRB-2000B
SINGLE SIDED
WIDEVISION 2
ROLLER BANNER
W
1200mm (w) SILVER Code: WVRB2-1200A 1200mm (w) BLACK Code: WVRB2-1200B High resolution full colour printed graphic panel onto 500gsm Light block Soflat PVC Standard Graphic Height (approx) 2145mm1500mm (w) SILVER Code: WVRB2-1500A 1500mm (w) BLACK Code: WVRB2-1500B 2000mm (w) SILVER Code: WVRB2-2000A 2000mm (w) BLACK Code: WVRB2-2000B
DOUBLE SIDED
Wide Mosquito
ROLLER BANNER
W
1200mm (w) Code: WMRB-1200AHigh resolution full colour printed graphic panel onto 500gsm Light block Soflat PVC Standard Graphic Height (approx) 1992mm
1500mm (w)
Code: WMRB-1500A
2000mm (w)
L
LIGHTNING
TENSION BANNER
As a very cost-effective tension banner, Lightning is the ideal solution for budget display and frequently changed messages.
Snap rail enables easy graphic changes Aluminium with anodised silver finish bungee pole
Available in 800mm (w) x 2000mm (h) Complete with bag and tube Graphic Printed on 180mic Polyprop Code: LTB-03
VORTEX
TENSION BANNER
A simple yet effective free standing tension banner. The Vortex frame is quick to assemble and graphics are housed separately to the base unit, so are easy to change and refit.
Supplied with padded carry bag Size: 855mm (w) x 1950mm (h) Simple eyelet system PVC banner graphic Code: VTB-03
Pegasus
TENSION BANNER
P
Pegasus Tension Banner Stand Single/Double sided options. The Pegasus giant tension banner stand is ideal for creating large graphic backdrops for exhibition stands, retail displays, and Media boards and branding environments.
Adjustable telescopic pole Lightweight frames & fixings Dismantles easily for transportation Cost effective
Finished with a silver powder coat PVC Banner Graphic SIZE 1500mm (w) x 2435mm (h) 2000mm (w) x 2435mm (h) 2410mm (w) x 2435mm (h) CODE PTB15-01 PTB20-01 PTB24-01
B
BLIZZARD
BANNER
Blizzard is ideal for all kinds of corporate and sporting and outdoor events and promotions and point of sale. Its simple design makes it very easy to assemble on-site, and because it’s adjustable, it can accommodate different graphic sizes to suit your application.
Stylish design hollow plastic base for water or sand weighting agent Base holds 15 litres water approx Telescopic pole for adjustable height Weather resistant
Optional carry bag
Withstands winds up to 13-18mph approx PVC Banner Graphic
Size: 800mm (w) x 2000mm (h) Code: BBS-02
ATLAS
AD F
G
Suitable for lightweight flag textile Plastic, easy push-fit assembly Adjustable height pole Black pole and base Hollow base for water or sand weighting - 8 litre capacity Overall Height 2560mm Weight 2.6kg. With water filled base 9.6kg
Flag size: 550mm (w) x 1800mm (h) Code: ADF-02
T
THUNDER
BANNER
The only double-sided retractable outdoor
banner. Thunder is the ideal roller banner for outdoor use being strong and durable yet very easy to assemble and transport. At 2m high Thunder will display your message on both sides for maximum viewing impact.
Double sided outdoor banner Large Twin feet
Three part bungee pole 2m high
Beaufort scale 5 if pegged (18-24mph) Beaufort scale 2 if unpegged (4-7mph) PVC Banner Graphic
Padded bag included Size: 850mm (w) x 2025mm (h) Code: TBS-02
HURRICANE
BANNER
The hurricane banner outdoor double sided roll-up banner offers great versatility for campaigns all year round.
Double sided outdoor banner Moulded plastic base can be filled with sand or water for additional stability Twist-out foot for extra support Wheeled base for ease of transportation
PVC Banner Graphic Includes carry-bag
Size: 800mm (w) x 2000mm (h) Code: HBS-02
VISION DESK
ROLLER BANNER
V
Ideal as a desktop promoter or as a promotional giveaway.
Ideal promotional desktop product A4 and A3 size available
Retractable roller banner Self-adhesive top rail Lightweight
Two piece support pole Available in anodised silver Quick to assemble and easy to use Indoor Use Only
Graphic printed on 180mic Polyprop
A4 Code: VDRA4 A3 Code: VDRA3
SENATOR DESK
ROLLER BANNER
S
Desktop Senator features a low profile top and bottom rail that is invisible from the front, giving a seamless graphic appearance.
Very simple construction with self adhesive rail for easy graphic fitting Stable cast base foot
Anodised silver finish Size 360mm (w) x 685mm (h) Graphic printed on 180mic Polyprop Code: SD360
DESKTOP
F
GS
D
These desktop flags will look stunning on every desk or table. Printed on polyester satin they come in four sizes:
14cm x 28cm, 9cm x 29cm, 11cm x 23cm, 9cm x 27cm. Minimum order: 10 units.
SIZE 95mm x 280mm 90mm x 290mm 140mm x 280mm 90mm x 270mm CODE DF001 DF002 DF003 DF004 IMAGE 1 2 3 4 1 2 3 4
VISION ROLLER
BANNER BUNDLE
v
Vision roller banner bundle is still the best value bundle, we have put a perfect bundle from our best sellers, for use in shell scheme exhibition stand, marketing displays or sales presenting.
Includes:
1x 1500mm Wide Orient roller banner stand 2x Expovision Roller Banners
1x Pop-up Counter
1x A4 Zed up lite Literature Stand
All banners printed on 500gsm Light block PVC So Flat.
Counter printed on 320mic Polyester, finished with protective scratch resistant over laminate finish
Code: VRB-01
CURVED
BANNER STAND
Curve exhibition stand sold only as a 3 panel kit complete with hardware, graphics, packaging and graphics tube, it has been designed to fill the gap between the numerous budget exhibition stands and pop up display stands.
The Curve allows you to create and recreate virtually any shape you require without having to change hardware or graphics.
Visible Size: 2025mm (w) x 2060mm (h) 2 x 850mm wide panels
1 x 425mm wide panel (flexi panel) 3 panel system
Total Weight inc of hardware and graphic 15kg Turn a single side curve to a double sided by adding extra graphic panels
Quick change graphic facility Weighted Anti-slip base Optional Lights Available
Carry cartons & graphic tubes included
Graphics printed 320mic Polyester Film, Finished with protective scratch resistant over laminate finish
Code: CBS-01
VISION POP UP
DISP
Y STAND
PRO KIT 1
V
Includes:
Pop-Up Stand Frame 3x3/3x4 High Quality Printed Graphics Integrated Trolley Case 2X Lights for popup Case to Counter Conversion Printed Wrap for Case
Footprint size 3x3: 2492mm (w) x 2225mm (h) x 596mm (d) Footprint size 3x4: 3073mm (w) x 2225mm (h) x 795mm (d) 3x3 Code: PRO3X3-1 3x4 Code: PRO3X4-1
VISION POP UP
DISP
Y STAND
PRO KIT 2
V
Includes:
Pop-Up Stand Frame 3x3 High Quality Printed Graphics Integrated Trolley Case 2x Lights for popup Case to Counter Conversion Printed Wrap for Case 2x Banner Stands Zed Up Literature Rack
320mic Stop Light Polyester Film.
Finished with protective scratch resistant over laminate finish
3x3 Pop-Up Stand printed on
320mic Stop Light Polyester Film. Finished with protective scratch resistant over laminate finish
Roller Banners Printed on
180mic Polyprop
PRO3X3-2
L SHAPED CORNER
POP UP STAND
PRO KIT 4
L
Pro Kit 4 is one of our best selling L-shaped Pop Up display stand packages and is designed to sit neatly within the corner of your exhibition stand space, maximising the exhibiting area available.
This L-shape design comprises of two 3 x 2 straight frames and covers two walls measuring approximately 2170mm per side.
Graphics printed 320mic Polyester Film, Finished with protective scratch resistant over laminate finish
Includes:
2x 3 x 2 straight frames
7x Full colour printed/laminated graphics 2x Hard wheeled case
4x Halogen Lights Code: LSPRO-04
L SHAPED CORNER
POP UP STAND
PRO KIT 5
L
Our L-shaped Pop-Up stands are ideal for exhibition trade shows as they are easy to transport and erect. Ideally positioned within the corner of your booth, this unique L-shaped display maximise the space available.
Pro kit 5 comprises of two 3x3 straight frames and covers two walls, each measuring approximately 2900mm, ideal for a 3m x 3m corner stand.
Graphics printed 320mic Polyester Film, Finished with protective scratch resistant over laminate finish
Includes:
2x 3 x 3 straight frames
9x Full colour printed/laminated graphics 2x Hard wheeled case
4x Halogen Lights Code: LSPRO-05
FABRIC
SUPER LIGHTWEIGHT
POP UP SYSTEM
F
This fabric pop up option is super lightweight and can be installed in just 1 minute. Graphics are produced on 250gsm stretch fabric and are printed in one piece. Ideal when speed and weight are an issue. Available in various sizes. The graphic can be fully wrapped around the ends or made to just for the front face.
Simple yet elegant looking Fabric fits smoothly across the Frame work and stays in place once the frame has been collapsed Available with graphics printed in one piece Super lightweight (easy to carry)
Installs in less than one minute Stand Size: 3x2 - 2262 (h) x 1525 (w) mm - Code: FPU3X2 3x3 - 2262 (h) x 2260 (w) mm - Code: FPU3X3 3x4 - 2262 (h) x 2995 (w) mm - Code: FPU3X4 3x5 - 2262 (h) x 3730 (w) mm - Code: FPU3X5
INCLUDES
LIFETIME
WARRANTY
Hardware only. FREE WHEELED CARRYBAGFABRIC HOP-UP
COUNTA
F
SEG
COUNTA
Quick and easy to assemble with single wrap around fabric graphic. Tool free assembly. Single shelf and carry bag included.
Visible graphic area (approx): 995 (h) x 1685 (w) mm Total hardware dimensions (approx):
1020mm (h) x 1065mm (w) x 400mm (d) Graphics are produced on Heavy Duty Fabric
NEW
NEW
Display counter with thermoformed top in choice of five colours. Two shelves for storage fabric graphic wrap that fits easily and snugly into the silicone edged channel. Visible graphic area (approx): 937 (h) x 2340 (w) mm Total hardware dimensions (approx):
985 (h) x 840 (w) x 360 (d) mm
Graphics are produced on Heavy Duty Fabric
9
9M
STANDS
2
Single back wall, open on three sides. A basic stand design to suit the cost conscious pocket whilst offering a smart stand solution. The plain yet spacious back wall allows for literature shelving, poser table, tv monitor and lighting. As there is only a single back wall this allows plenty of floor space for a counter and chair to welcome guests Constructed from Linear vector with magnetic tape and PVC graphics.
Code: EXPO1
9
9M
STANDS
2
Simple design with one shaped back wall, allowing easy access onto your stand. Straight and curved panels allow for interesting multi dimensional graphics, use lighting for the ultimate effect.With plenty of space for
accessorising and room for a welcome counter, this is a very cost effective design for when you have limited space.
Constructed from Linear vector with PVC graphics
Code: EXPO3
9M
STANDS
2
Open on two sides this stand has plenty of space for a bar table and stools, poser table plus a welcome counter.
The sharp design also allows for literature shelves on the edges of the stand and over panel lighting.
Constructed from Linear vector with magnetic tape and PVC graphics.
Code: EXPO4
9M
STANDS
2
Pop-up displays are aptly named as they pop up and click into place using magnetic locking arms, graphics are attached using mag bars. Displays can be as simple as you want or create large exhibition areas at a very cost effective price. Connect three frames together with linking panels to create a flowing design complete with centre cut out and tv monitor. For extra impact and height add a four quad Pop-up tower; for storage and shelving there is also a Pop-up counter available. Constructed using three Pop-up frames and Pop-up tower.
9
9M
STANDS
2
Cost effective and interesting way of creating an exhibition stand using Linking banner kits. Create a large area for your message at a fraction of the cost using two Premium roller banners with a suspended graphic in between. Complete the area using an Oyster case which converts into a large table top counter with storage and shelving within. Constructed using Premium roller banners with banner linking kit
Code: EXPO5
9
9M
STANDS
2
A U shaped stand design with three walls and open at the front, offering a little more privacy from neighbouring exhibitors. The design still allows space for table and four chairs, a poser table and a welcome counter. The straight walls offer plenty of area for tv monitors and literature racking plus plenty of overhead lighting.
Constructed from Linear vector with magnetic tape and PVC graphics
Code: EXPO7
12M
STANDS
2
Clever design which is open on three sides with a straight back wall. Large counters positioned close to back of the stand with plenty of counter space for monitors. Tall Linear vector graphic panels are attached behind each counter for extra branding or graphics options. Floor is left clear and open welcoming customers onto the stand.
Constructed from Linear vector with textile fabric graphics
Code: EXPO8
9M
STANDS
2
Eye-catching shaped display and counter which offers access from three sides. Recessed alcoves providing space for acrylic shelves. Plenty of floor space allowing for large counter and literature stands
Constructed from Linear vector with textile fabric and PVC graphics
12
12M
STANDS
2
Open on two sides with straight back walls and corner section. Design allows for integral shelving sheltered by two end panels offering a sense of privacy whilst on the stand. With plenty of room for a welcome counter and table and chairs, you can also accessories with ambient lighting and tv monitors.
Constructed from Linear vector with PVC graphics
Code: EXPO9
18M
STANDS
2
Interesting stand open on two sides with two tall arches that draw attention. The design flow tempts your customers to walk through the archways, ideal for show casing artwork or information on the large back walls and pillar fronts. Room for table and chairs plus welcome counter, tv monitors and literature holders.
Constructed from Linear vector with textile fabric graphics
Code: EXPO11
16M
STANDS
2
Attractive design open on two sides with tall end columns giving multi dimension to a simple design. Plenty of room to add bar table and stools plus welcome counter and literature holders. Columns allow the mounting for TV monitors. Constructed from Linear vector with textile fabric graphic.
Code: EXP10
30M
STANDS
2
Impressive designed island stand with large hanging structure above offering excellent branding and awareness opportunities. High impact stand with some smart ways to reconfigure. Centre tower can be re-shaped into a back wall; use two, three or four of the graphic legs depending on space.
All designs incorporate a welcome counter, literature holders and tv monitors. For maximum exposure all three designs have a Formulate hanging structure making sure your stand is seen from all corners of the exhibition hall.
Code: EXP12
Twist is one of the most portable, flexible and modular display systems available today. The Twist range of products has been designed to add flexibility, portability and value for money to any exhibition or display situation. Manufactured in the UK, Twist products can be used in any exhibiting situation from a single banner stand, shell scheme, or a bespoke stand. Its flexible elements combine to make a unique and striking graphic presence that will have a lasting impression. You can add flexi link kits to the system to make an exclusive shape, add TFT monitors to make your stand a visual display with interactive elements and add custom height extensions to your existing system to give your stand the attention it deserves.
ORIGINAL
TWIST BANNER
O
Available in 2000, 2250 and 2700 (mm) height Available in 700, 800, 900 and 1000 (mm) Width Sides: single sided or double sided
High quality photo realistic printed graphic Includes canvas carry case
LED Lights included Code: OTB-01
SINGLE
MEDIA TWIST
Available in 2000, 2250 and 2700 (mm) height Available in 700, 800, 900 and 1000 (mm) Width Sides: Single Sided or Double Sided
High quality photo realistic printed graphic Includes Canvas Carry Case
LCD Screen not included LED Lights included Code: SMT-01
TWIST 2 PANEL
STRAIGHT
T
TWIST 3 PANEL
FLEXI LINK
The Twist 2 panel straight kit offers two displays in one. You can choose to have one seamless straight display or split the banners into two individual displays.
Includes:
2x Twist banners with printed graphics 1x Rear easi-link joining kit
2x Carrying bag sets
2x LED spotlights o two individual displays. Code: TS2-01
Available in three different heights and four widths Height: 2000mm, 2250mm, 2700mm
Width: 1400mm, 1600mm, 1800mm, 2000mm
The Twist Flexi Link 3 modular system is one of the most versatile banners on the market. The flexi-link aspect of this display is a 550mm wide graphic panel that sits in-between the main Twist banners and allows you to create controlled, seamless curves as well as straight back walls.
Includes:
2x Twist banners with printed graphics 1x Bridging panel
1x Wheeled Carrying Case 2x LED spotlights Code: TS3-01
Available in three different heights and four widths Height: 2000mm, 2250mm, 2700mm
Width 1950mm, 2150mm, 2350mm, 2550mm
TWIST
DISP
Y SYSTEMS
T
TWIST 5 PANEL
FLEXI
LINK
Flexi Link Twist banners are one of the most versatile exhibition systems on the market, incorporating bridging graphic panels. The panels sits in-between the main banners allowing you to create controlled, seamless curves as well as straight back walls.
TWIST 7 PANEL
FLEXI
LINK
The 7 Panel Flexi-Link Twist Display Stand is the most flexible banner system on the market. The flexi-link aspect of this display is a 550mm wide bridging panel that sits in-between the main Twist banners, thus allowing you to create controlled, seamless curves as well as straight back walls.
Includes:
4x Twist banners with printed panels 3x 550mm (w) flexi-link bridging panel 3x Rear flexi-linking kits
4x Spotlights
2x Wheeled transit cases Code: TF7-01
Available in three different heights and four widths Height: 2000mm, 2250mm, 2700mm Widths: 4450mm, 4850mm, 5250mm, 5650mm
T
TWIST 3 PANEL
STRAIGHT
The Twist visual presentation stand is a user friendly banner system that packs neatly away into three easy to transport carrying bag sets, and is a popular choice for those wanting a portable audio visual display stand.
Includes:
3x Twist banner stands with printed panels 2x Rear easi-linking kits
1x VESA TV Mount (Screen not included) 3x Padded carrying bag sets
3x Spotlights Code: T3M-01
Available in three different heights and four widths Height: 2000mm, 2250mm, 2700mm Widths: 2100mm, 2400mm, 2700mm, 3000mm
TWIST 6 PANEL
WITH SHELVING
The 6 panel Twist linked banner display enables you to create controlled, seamless curves as well as straight back walls. The added bonus to this particular package is that it incorporates shelving so you can display related products and merchandise, without taking up any further floor space.
Includes:
4x Twist banners with printed panels 2x Twist flexi-link bridging panel
4x Shelves 800mm wide (2kg load bearing) 4x LED spotlights
2x Wheeled transit cases Code: TS6-01
Available in three different heights and four widths Height: 2000mm, 2250mm, 2700mm Widths: 3900mm, 4300mm, 4700mm, 5100mm
Includes:
3x Twist banners with printed panels 2x - 550mm (w) flexi-link bridging panel 2x - Rear flexi-linking kits
3x - LED spotlights 1x - Wheeled transit cases 1x - Padded carrying bag set Code: TF5-01
Available in three different heights and four widths Height: 2000mm, 2250mm, 2700mm Widths: 3200mm, 3500mm, 3800mm, 4100mm
L
LINEAR Vector
FABRIC/RIGID DISP
YS
Ideal for quick change applications such as promotions, point of sale displays, showrooms, information displays, room dividers and exhibition backdrops; or to create high impact, seamless large format graphic walls. Our modular range of Linear graphic display units can be used individually or combined to create your own configurations with a wide range of accessories.
Linear Vector
DISP
Y SYSTEM - KIT
1
L
Available in a choice of frames to suit either fabric or rigid substrate graphics
Applying and reapplying graphics is very easy
Fabric graphics are edged with silicon bead that simply slots into the frame
Lightweight and easy to store Packs down for easy transportation Easy to assemble
Visible graphic area: 2000mm (h) x 1000mm (w)
1x 1000mm (w) x 2000mm (h) frame, 1 pair of feet
Available in a choice of frames to suit either fabric or rigid substrate graphics Applying and reapplying graphics is very easy Fabric graphics are edged with silicon bead that simply slots into the frame
Lightweight and easy to store Packs down for easy transportation Easy to assemble
Visible graphic area: 2000mm (h) x 2000mm (w)
2x 2000mm (w) x 1000mm (h) frame, 2 pairs of feet
FABRIC
Code: FLVK1
RIGID GRAPHICS
Code: RLVK1
Linear Vector
DISP
Y SYSTEM - KIT
2
FABRIC
Code: FLVK2
RIGID GRAPHICS
Code: RLVK2
Linear Vector
DISP
Y SYSTEM - KIT
3
L
Available in a choice of frames to suit either fabric or rigid substrate graphics
Applying and reapplying graphics is very easy
Fabric graphics are edged with silicon bead that simply slots into the frame
Lightweight and easy to store Packs down for easy transportation Easy to assemble
Visible graphic area: 2000mm (h) x 3000mm (w) 3x 2000mm (h) x 1000mm (w) frame, 2 pairs of feet
FABRIC
Code: FLVK3
RIGID GRAPHICS
Code: RLVK3
Linear Vector
DISP
Y SYSTEM - KIT
4
FABRIC
Code: FLVK4
RIGID GRAPHICS
Code: RLVK4
Available in a choice of frames to suit either fabric or rigid substrate graphics
Applying and reapplying graphics is very easy
Fabric graphics are edged with silicon bead that simply slots into the frame
Lightweight and easy to store Packs down for easy transportation Easy to assemble
Visible graphic area: 2000mm (h) x 3000mm (w)
3x 2000mm (h) x 1000mm (w) frame, 2x 2000mm (h) linear posts
Optional iPad holder available
Linear Vector
DISP
Y SYSTEM - KIT
5
L
Z shaped linkable modular system Printed textile graphic included Quick change graphics Lightweight aluminium frame Compact storage
Frame-less appearance Visible graphic area (approx): 2000 (h) x 5000 (w) mm
Total hardware dimensions (approx): 2000 (h) x 3100 (w) x 1050 (d) mm
Kit 5 - x 5, 2000mm (h) x 1000mm (w) frames x 2, 2000mm (h) Linear posts
*Light optional and not included
Linear Vector
DISP
Y SYSTEM - KIT
6
L
U shaped linkable modular system Printed textile graphic included Quick change graphics Lightweight aluminium frame Compact storage
Frameless appearance LCD bracket included Poser table included Visible graphic area (approx): 2000 (h) x 5000 (w) mm
Total hardware dimensions (approx): 2000 (h) x 4100 (w) x 550 (d) mm
Kit 6 - x 4, 2000mm (h) x 1000mm (w) frames x2, 2000mm (h) x 500mm (w) frames x3 2000mm (h) Linear posts, poser table and LCD bracket
Linear Vector
DISP
Y SYSTEM - KIT
7
L
U shaped linkable modular system Printed textile graphic included Quick change graphics Lightweight aluminium frame Compact storage
Frameless appearance LCD bracket included Poser table included
Total hardware dimensions (approx): 2000 (h) x 4950 (w) x 550 (d) mm
Kit 7 - x 2, 2000mm (h) x 2400mm (w) frames x2, 2000mm (h) x 500mm (w) frames x3 2000mm (h) Linear posts, poser table and LCD bracket
FABRIC Code: FLVK5 RIGID GRAPHICS Code: RLVK5 FABRIC Code: FLVK6 RIGID GRAPHICS Code: RLVK6 FABRIC Code: FLVK7 RIGID GRAPHICS Code: RLVK7
LINEAR
MODU
R DISP
YS
Sturdy aluminium kit available both straight or curved and with attractive end bar spacers. Simple to construct but ideal for a portable or permanent display.
The Linear Kit B is a stylish aluminium frame display system suitable for permanent and short term displays. Available straight or curved, the Linear Kit B provides an alternative to pop up displays and banner stands for someone who wants something a little more solid and permanent. Available with solid foamboard graphics or with rollable lightweight graphics, the Linear Kit B also offers the opportunity to attach accessories to the upright poles such as literature racks, shelves and LCD screens.
L
C
CURVED
PANEL KIT A
STRAIGHT
PANEL KIT A
STRAIGHT
PANEL KIT B
Visible graphic area and total hardware dimensions (approx): LK023 C 2000 (h) x 1000 (w) mm LK023 D 2000 (h) x 2000 (w) mm LK023 E 2000 (h) x 3000 (w) mm Code: LK023-C to E
2000 (h) x 1000 (w) mm unit shown. iPad not included.
Visible graphic area and total hardware dimensions (approx): LK020 B 2000 (h) x 500 (w) mm LK020 C 2000 (h) x 1000 (w) mm LK020 D 2000 (h) x 2000 (w) mm LK020 E 2000 (h) x 3000 (w) mm Code: LK020-B to E 2000 (h) x 1000 (w) mm unit shown. Optional iPad holder available.
Visible graphic area and total hardware dimensions (approx): LK021 B 2000 (h) x 500 (w) mm LK021 C 2000 (h) x 1000 (w) mm LK021 D 2000 (h) x 2000 (w) mm LK021 E 2000 (h) x 3000 (w) mm Code: LK021-B to E 2000 (h) x 1000 (w) mm unit shown.
C
CURVED
PANEL KIT B
Visible graphic area and total hardware dimensions (approx): LK023 B 2000 (h) x 1000 (w) mm LK023 C 2000 (h) x 2000 (w) mm LK023 D 2000 (h) x 3000 (w) mm Code: LK024-B-D
Please note: LCDs, lights and graphics shown are for illustration purposes only and are not included with the kits. Measurements show maximum recommended graphic area. This will vary depending on which fixing option is used.
Formulate is a brand new back wall system that looks spectacular with its sweeping lines and large visual graphic area. Formulate back walls are aluminium structures, easy to assemble supplied with fabric graphic socks that fit snugly around the frame.
All frames can hold optional low voltage lighting and all are supplied with a sturdy case for protection and safe
transportation. Formulate Table Top is a miniature version of the Vertical Curve back wall and is ideal for smaller areas or table top promotions.
Formulate
WALL SYSTEMS
F
F
FORMULATE
TABLE TOP
For more information on our folding tables and table cloths go to page ??
Total hardware dimensions (approx): 1140mm (h) x 1575mm (w)
FORMULATE
VERTICAL CIRCLE
Total hardware dimensions (approx): 2310mm (h) x 2900mm (w)
Code: FVCK1-02
F
FORMULATE
STRAIGHT
Total hardware dimensions (approx): 2340mm (h) x 2900mm (w)
Code: FSK1-02
FORMULATE
HORIZONTAL CURVE
Optional lighting available
Total hardware dimensions (approx): 2340mm (h) x 2870mm (w)
Code: FHCK-02 Code: FTTK1-02
TEXstyle Wave
FABRIC DISP
Y
T
Freestanding S-shaped fabric tension display System dismantles to compact size with carry bag for easy transportation
Graphic Size(mm) - 3150w x 2280h Code: TSWFD-01
TEXstyle Curved
FABRIC DISP
Y
Freestanding curved fabric tension display ideal for modern exhibiting or meeting backdrop
Lightweight yet strong framework makes for quick and simple assembly
System dismantles to compact size with carry bag for easy transportation Graphic Size 3150mm (w) x 2280mm (h) Code: TSCFD-01
TEXstyle STRAIGHT
FABRIC DISP
Y
T
Straight fabric tension display with support feet System dismantles to compact size with carry bag for easy transportation
Carry bag included
Graphic Size 2980mm (w) x 2280mm (h) Code: TSSFD-01
TEXstyle Concave
FABRIC DISP
Y
Modern concave shaped fabric tension display with support legs Lightweight yet strong framework makes for quick and simple assembly
Carry bag included
Graphic Size(mm) - 2780w x 2280h Code: TSCFD-01
TEXstyle SURGE
FABRIC DISP
Y
T
Sweeping vertical fabric graphic for a striking visual display Strong and stable with additional support feet
System dismantles to compact size with carry bag for easy transportation Graphic Size
915mm (w) x 2350mm (h)
TEXstyle SWIRL
FABRIC DISP
Y
Stunning vertical S-shaped fabric tension display for maximum visual impact Strong, stable and freestanding System dismantles to compact size with carry bag
for easy transportation Graphic Size
915mm (w) x 3500mm (h)
TEXstyle ICON
FABRIC DISP
Y
Tapered totem shaped fabric tension display
Lightweight yet strong framework makes for quick and simple assembly
System dismantles to compact size with carry bag for easy transportation
Graphic Size
MONSOON
BANNER FRAME
M
Graphics included
Indoor or outdoor banner system Suitable for single or double sided display
3 frame sizes 1250mm x 1250mm, 1000mm x 2500mm and 1250mm x 3000mm Wall Mounted version available
Extension kits available
Natural finish 25mm (1") square aluminium tubes with reinforced plastic mouldings Easy push-fit assembly, no tools necessary
Graphics are secured to the frame with elastic bungee cords Supplied complete with carry bag, flat packs for easy transportation
PVC BANNER SINGLE SIDED
1250mm x 1250mm 1000mm x 2500mm 1250mm x 3000mm CODE MBF1250-01 MBF1000-01 MBF3000-01 PVC BANNER DOUBLE SIDED
1250mm x 1250mm 1000mm x 2500mm 1250mm x 3000mm CODE MBF1250-02 MBF1000-02 MBF3000-02 1250mm wide
NEW
P
POP OUT
BANNERS
Our pop up/spring up A frame banners will ensure maximum exposure of your brand, logo or message with minimum fuss.
HORIZONTAL POP OUT A FRAME BANNER POLE SIZE
1200mm x 700mm 2000mm x 1000mm 2500mm x 1000mm 2730mm x 1360mm CODE POB1200-01 POB2000-01 POB2500-01 POB2730-01 VERTICAL POP OUT A FRAME BANNER POLE SIZE
1000mm x 1500mm 1000mm x 2000mm CODE POB1500-02 POB2000-02 Banner Frames
Also available in a Variety of other shapes and sizes, please ask for more details.
Rectagular High Screen Rectagular Square Trianglar 3 Sided Tower Horizontal pop out A Frame banner
W
WIND DANCER
PORTABLE F
G
Designed to be lightweight and portable for transportation yet impactive and heavyweight at the event. Simply fill the base with water to add weight and stability and then attach the pole and flag. Choose from our Maxi or Mini versions.
Portable and lightweight for transportation
5m Maxi version base splits into 4 easy carriage parts 4m Mini version one solid base unit
Telescopic pole
Easy clip on the flag using eyelets
Withstands 13-18 mph winds (Beaufort scale 4) Flag graphic sizes:
Maxi - 1000mm x 3500mm Mini - 800mm x 2800mm Weights/capacity:
Maxi - 17.5kg empty, 76kg full (66 litres) Mini - 8kg empty, 52kg full (44 litres)
Reverse side of flag is a mirror image of the front side Optional carry bags available £POA
Includes printed flag
5m Wind Dancer - Maxi 4m Wind Dancer - Mini
4m Wind Dancer - Mini 5m Wind Dancer - Maxi
WD-04 WD-05
B
BACK PACK
F
GS
This is a fantastic way to advertise events and promotions, quick and easy to use this is a very cost effective flag display system. We can supply the whole kit consisting of backpack and banner; the backpacks can be reused for different events. We can supply the banner flag on its own enabling you to advertise different events and promotions.
The system comprises of a quality backpack, sectional flagpole and banner flag. Both sides of the flag banner can be the same or two different designs. There are two styles of banner flag shapes you can choose from Sail (Teardrop) Backpack or Rectangle Backpack
Sail (Teardrop) backpack Rectangle backpack
Available in single & double sided
STBP-01 RBPF-01
Large pocket Padded shoulder straps
Help to promote your company. If you are going to an exhibition or an event where you will be showcasing your company why not consider a promotional printed tablecloth.
Help your company to stand out from the crowd and have a professional finish to your table. We have helped thousands of companies to do this, from large blue chip companies requiring hundreds of printed tablecloths for worldwide usage to small one man outfits, our printed tablecloths can help you to win business and customers.
PRINTED
TABLECLOTHS
P
All tablecloths are printed onto 220gsm heavy weight display fabric and hemmed.
Tablecloth is designed for long term use and is machine washable. Code: PTC-01
C
CUSTOM PRINTED
F
GS
An eye on detail...digitally printed flags are sharp and vibrant. We are a premier supplier of digitally printed flags – supplying numerous blue chip and prestigious companies.
Short lead times High resolution graphics
Vibrant and long lasting image from one to four colour Cost effective for low to medium volumes
Highly visible way of communicating your brand Finishing options:
Print up to 3.2m wide – in one piece Mirror imaged or double sided
Looped and toggled – to be flown traditionally
Sleeved with mast bands – to be used on a pole with a rotating banner arm For further information and pricing please contact our sales team
P
POP-UP
COUNTER
The versatile pop up counter is a great add-on to any existing display system. Graphics are produced on sturdy laminated material and are then magnetically attached around the front and sides of the podium concealing sturdy shelving.
Elegant high quality, rapid erect, self supporting anodised aluminium structure
Simple fully magnetic rail connection
Laminated counter top, shelves, carry bag supplied Footprint 1305mm x 505mm, height 906mm Visible graphic area (approx):
2x1: 950mm (h) x 1540mm (w) 2x2: 950mm (h) x 2060mm (w) Total hardware dimensions (approx): 2x1: 985mm (h) x 865mm (w) x 400mm (d) 2x2: 985mm (h) x 1290mm (w) x 465mm (d) 2x1 PCS21 2x2 PCS22
Reverse view 2x1 Pop-up Counter
P
PHYSIQUE FLAG
COUNTER KIT
Grab the attention of your customers with the Flag Counter kit, available to attach to most table tops this small 1.5m flag is suitable for in door use.
Popular, strong and multipurpose counter Generous sized table top
Open back and full wrap options Total hardware dimensions (approx): Counter: 1000 (h) x 1000 (w) x 500 (d) mm Code: PCF15
PROMO
COUNTER
P
Promotional Counters are a great way of attracting attention at in-store promotions, events and exhibitions. The Counta promotional counter weighs approximately 13KG, which makes it portable enough to be transported by hand.
The Counta promota is supplied with a nylon carry bag Lightweight plastic flat pack promotional unit Suitable for indoor or outdoor use
Includes rigid header panel, shelf and twin supporting poles Supplied with carry bag
Unprinted (no graphics, unit is plain white) Front Panel & Header Panel Printed
Front Panel, Side Panels and Header Panel Printed
Please specify required format when ordering.
CHOOSE FROM THE FOLLOWING OPTIONS...
01 01 02 02 03 03
Promo counter only
With graphic (including header and front panel)
With graphic (including header, front panel and sides)
PCU-01 PCUG-01 PCUGS-01
OYSTER
COUNTER
O
The Oyster case is a spacious sturdy ‘clam style’ transportation case which converts quickly into a stylish and surprisingly XL sized counter.
Large wrap around table top and integral locking nuts to secure quickly into place
Two detachable shelves for storage Design your own graphics on the wrap Store your pop-up display, plus table top and shelves inside Oyster and wheel away Graphic Wrap included
Visible graphic area (approx): 920 (h) x 1745 (w) mm
Total hardware dimensions (approx): Open: 1020 (h) x 1430 (w) x 595 (d) mm Closed: 1010 (h) x 660 (w) x 430 (d) mm Code: OYSC-01
Choose from a range of stylish iPad holders including free- standing, Zeus case mounted. Each type can support all variations of iPads apart from mini.
Tablet Holders,
GRAPHIC PODS & IPAD LIGHTBOXES
T
FREE STANDING
IPAD HOLDER
F
Secure housing with security screws and allen key Can be positioned portrait or landscape
Available in black, silver or white and is durable and theft resistant Total hardware dimensions (approx):
Landscape: 1045 (h) x 360 (base dia.) mm Portrait 1060 (h) x 360 (base dia.) mm Code: FSIH-01
NEW
IPAD HOLDER
I
Tilt and rotate your iPad 360° Can be mounted onto desk top, wall or Linear post
Comes complete with all parts and fixing kit Available in black, silver and white surround Code: IH360
NEW
360
o
Z
Designed to fit into the recessed area on the lid of the Zeus case, secured with strong hook and loop fastenings Table top available in walnut, white, black or silver thermoform
Price includes table top with housing fitted and supplied in box
Total hardware dimensions (approx): Table Top: 25 (h) x 420 (w) x 640 (l) mm Zeus case and iPad not included Code: ZTPH-01
Zeus case and iPad not included
ZEUS TABLE TOP
WITH IPAD HOLDER
LINEAR COLUMN
WITH IPAD HOLDER
Includes printed graphic panels Optional iPad holder 360˚ for multi media solutions
Internal LED lighting options of white or RGB
Visible graphic area (approx): 970 (h) x 525 (w) mm graphic panel Total hardware dimensions (approx): 1010 (h) x 640 (w) x 325 (d) mm Code: LCIP-01
iPads not included
A simple snap action poster frame with mitred corners. Ideal for quick-change retail or showroom promotions. Aluminium with anodised silver or black finish with custom colours available to order. Suitable for wall mounting. Moulded corner version available.
SNAP
FRAMES
S
Quick and easy poster change
‘Security by intelligence’ – when closed, all fixings and opening method are hidden from view
Silver anodised finish as standard (unless otherwise stated) Anti-glare poster cover sheets
Pre-drilled and individually boxed with screws and wall plugs White or grey plastic back panels depending on size/style Suitable for indoor or outdoor use
SILVER FRAME WITH MITERED CORNERS
A5 25mm profile A4 25mm profile A3 25mm profile A2 25mm profile A1 25mm profile A0 25mm profile 20"x30" 25mm profile CODE A525 A425 A325 A225 A125 A025 A205
BLACK FRAME WITH MITERED CORNERS
A5 25mm profile A4 25mm profile A3 25mm profile A2 25mm profile A1 25mm profile 20"x30" 25mm profile 40"x30" 25mm profile CODE B525 B425 B325 B225 B125 B025 B305
P
POSTER
RAILS
Trappa poster display rail sets with a wall or ceiling mounted snap action for posters up to 300 microns thick in A4, A3, A2, A1 and A0 poster sizes and 300mm, 500mm, 600mm, 900mm, 1000mm and 1200mm lengths, suitable for wall or window displays.
Pair of silver anodised aluminum rails Black or Grey end caps
Open or Closed hooks
SIZE A4 A3 A2 A1 A0 300mm 500mm 600mm 900mm 1000mm 1200mm CODE PR1004 PR1003 PR1002 PR1001 PR1000 PR1030 PR1050 PR1060 PR1090 PR1100 PR1120
P
PIN
BOARDS
High quality, felt Pin Boards with a silver anodised aluminium frame and a softboard back panel. Choose from grey or blue felt finishes.
Available in 2 sizes: Pin Board 900 x 600mm Pin Board 1200 x 900mm
We can add graphics to your boards
Quotes on request
DRY WIPE
MAGNETIC BOARDS
900mm x 600mm Code: PBNB4 1200mm x 900mm Code: PBNB5 Available in 2 sizes:Dry Wipe Magnetic Board 900 x 600mm (White) Dry Wipe Magnetic Board 1200 x 900mm (White)
We can add graphics to your boards
Quotes on request 900mm x 600mm Code: DWNB1 1200mm x 900mm Code: DWNB2
L
LOCKABLE PIN
BOARDS
Lockable Cork Boards are perfect for public locations where notices need to be secure
Lockable Cork Boards 900 x 600mm Lockable Cork Boards 1200 x 900mm Lockable Pin Boards 900 x 600mm Lockable Pin Boards 1200 x 900mm
CORK
BOARDS
900mm x 600mm CORK Code: LPBN13 1200mm x 900mm CORK Code: LPBN14 900mm x 600mm PIN 1200mm x 900mm PINHigh quality natural cork pin boards with silver anodised aluminium frames and high specification soft board back panels. Choose from 2 sizes for the perfect notice board display. Easy to fix with supplied screw kit.
Available in 2 sizes:
Cork Boards - 900 x 600mm Cork Boards - 1200 x 900mm
We can add graphics to your boards
Quotes on request
900mm x 600mm
Code: CBN10
1200mm x 900mm
S
SLIM LED
LIGHT BOX
Our LED light boxes are a super slim 32mm deep. Offering a bright even spread of white light these light boxes are more cost effective to run than traditional florescent light boxes. Hence, making these our most“environmentally friendly” and reliable light boxes.
Super slim 32mm deep frame
LED illumination resulting in energy savings Snap open frame for easy change of graphics 1.5mm thick clear protective graphics cover Silver anodised aluminium frame
No assembly required
LINEAR VECTOR
LED WALL FRAME
Linear Vector wall frame with LED lighting will really catch your customers’ attention.
Aluminium wall frame with textile fabric graphic panel Channel to fit silicon edged fabric graphic in to
LED back lit to all four sides creating atmospheric wall art
Please remember, although you can buy florescent light boxes cheaper than these, by the time you add your running costs they work out more expensive than LED’s. LED light boxes are also expected to last 5 times longer than a standard florescent. Plus you don’t need to worry about broken bulbs! A4 LEDA4 A3 LEDA3 A2 LEDA2 A1 LEDA1 A0 LEDA0 B1 LVB1 B2 LVB2 A4 LVA4 A3 LVA3 A2 LVA2 A1 LVA1 A0 LVA0
S
sentry
Snap action free-standing poster frame for information display use. Head rotates for either portrait or landscape format literature. Available in A4 and A3 sizes in aluminium with anodised silver finish.
Total hardware dimensions (approx): A4 Total: 1005 (h) x 245 (w) x 326 (d) mm A4 Frame only: 277 (h) x 190 (w) mm A3 Total: 1075 (h) x 245 (w) x 326 (d) mm A3 Frame only: 398 (h) x 278 (w) mm A4 STA4 A3 STA3