Undercarriage
SECTION
PAGE NO.
Elevated Sprocket Tractors
. . . 3
Skidders
. . . 179
Low Sprocket Tractors
. . . 221
Track-Type Loaders
. . . 401
Excavators / Front Shovels
. . . 541
Paving Products
. . . 761
Mobile Track
. . . 785
Product Information
. . . 793
Conversion Guide
. . . 821
This Caterpillar Undercarriage book is designed to provide dealer salesmen (field and instore) with part
numbers and product information as well as features and benefits for selected parts and service
commodities. It is a quick reference tool which lists part numbers and applications for items that are: new,
competitive and high in sales volume and sales potential.
The Undercarriage book should not be used as a substitute for Parts Books, Numerical Parts Record,
Parts Pricing Medium or any other formal reference publication. All part numbers, specifications and
application data published in the Undercarriage book are subject to change without notice. Any
information taken from this publication for use in preparing a Parts Sales Order or Price Quotation
should always be verified against the Numerical Parts Record in accordance with the Management
Partsgram entitled “The Numerical Parts Record.”
The tab index enables users to quickly locate various sections in the Undercarriage book. Users are urged
to use the Undercarriage book consistently to help ensure close familiarity with the vast amount of part
number and product information.
ELEVATED SPROCKET TRACTORS
MODELS
PAGE NO.
D5M, D4H, 561H Pipelayer
. . . 3
D6M, D5H
. . . 30
D6R, D6H
. . . 57
D7R, D7H
. . . 95
D8R, D8N, 583R and 578 Pipelayers
. . . 125
D8L
. . . 140
D9L, 589 Pipelayer
. . . 146
D9R, D9N
. . . 154
D10R, D10N
. . . 161
D10
. . . 168
D11R, D11N
. . . 174
D4H HEAVY DUTY SEALED AND LUBRICATED TRACK*
2AC5597-UP, 8PB6091-UP
6.75” (171.5 mm) PITCH — 5/8” BOLT
PART
QUANTITY NUMBER
Link Assembly — 39 Section 2 108-0953
Track Links
RH Pin End Master 1 108-0949
LH Pin End Master 1 108-0950
RH Bushing End Master 1 108-0951
LH Bushing End Master 1 108-0952
RH Regular 38 108-0947
LH Regular 38 108-0948
Other Components
Pin 39 108-0943
Bushing 39 108-0944
Seal Assembly (Rigid) 78 110-7011
Thrust Ring 78 152-8069
Stopper 39 5G-2247
Plug 39 6Y-0473
Track Hardware**
Bolt 152 9G-3110
Nut 152 1M-1408
Master Bolt 2 9G-8592
Master Bolt 2 3T-8601
Special Sets/Groups
Seal Set (88 Seal Assemblies) 1 110-7039
Bushing and Seal Group (39 Sections) 1 115-2438
* When installing Heavy Duty Track on existing machines, refer to IRM UC94-18 for installation for guarding information. Also refer to Special Instruction SEHS9805 for additional guarding information.
D5M XL, D4H XL HEAVY DUTY SEALED AND LUBRICATED TRACK*
8PJ664-UP, 6GN1-UP, 5ES1-UP, 4BR1-UP, 4JS1-UP
6.75” (171.5 mm) PITCH — 5/8” BOLT
PART
QUANTITY NUMBER
Link Assembly — 41 Section 2 108-0955
Track Links
RH Pin End Master 1 108-0949
LH Pin End Master 1 108-0950
RH Bushing End Master 1 108-0951
LH Bushing End Master 1 108-0952
RH Regular 40 108-0947
LH Regular 40 108-0948
Other Components
Pin 41 108-0943
Bushing 41 108-0944
Seal Assembly (Rigid) 82 110-7011
Thrust Ring 82 152-8069
Stopper 41 5G-2247
Plug 41 6Y-0473
Track Hardware**
Bolt 160 9G-3110
Nut 160 1M-1408
Master Bolt 2 9G-8592
Master Bolt 2 3T-8601
Special Sets/Groups
Seal Set (88 Seal Assemblies) 1 110-7039
Bushing and Seal Group (39 Sections) 1 115-2438
* When installing Heavy Duty Track on existing machines, refer to IRM UC94-18 for installation for guarding information. Also refer to Special Instruction SEHS9805 for additional guarding information.
D5M LGP, D4H LGP, 561H HEAVY DUTY SEALED AND LUBRICATED TRACK*
9GJ1116-UP, 4NK164-UP, 3CR1-UP, 6AS1-UP, 3DR1-UP, 5FS1-UP, 7LR1-UP, 6NL383-UP
6.75” (171.5 mm) PITCH — 5/8” BOLT
PART
QUANTITY NUMBER
Link Assembly — 44 Section 2 108-0954
Track Links
RH Pin End Master 1 108-0949
LH Pin End Master 1 108-0950
RH Bushing End Master 1 108-0951
LH Bushing End Master 1 108-0952
RH Regular 43 108-0947
LH Regular 43 108-0948
Other Components
Pin 44 108-0943
Bushing 44 108-0944
Seal Assembly (Rigid) 88 110-7011
Thrust Ring 88 152-8069
Stopper 44 5G-2247
Plug 44 6Y-0473
Track Hardware**
Bolt 172 9G-3110
Bolt (Self-Cleaning Shoe) 86 9G-3110
Bolt (Self-Cleaning Shoe) 86 3T-3884
Nut 172 1M-1408
Master Bolt 2 9G-8592
Master Bolt 2 3T-8601
Master Bolt (Self-Cleaning Shoe) 2 9G-8592
Master Bolt (Self-Cleaning Shoe) 2 3T-3889
Special Sets/Groups
Seal Set (88 Seal Assemblies) 1 110-7039
Bushing and Seal Group (39 Sections) 1 115-2438
* When installing Heavy Duty Track on existing machines, refer to IRM UC94-18 for installation for guarding information. Also refer to Special Instruction SEHS9805 for additional guarding information.
D4H SEALED AND LUBRICATED TRACK
2AC1-5596, 8PB1-6090
6.75” (171.5 mm) PITCH — 5/8” BOLT
FORMER
PART PART
QUANTITY NUMBER NUMBER
Link Assembly — 39 Section 2 — 6Y-5407
Track Links
RH Pin End Master 1 9G-8583 6Y-9263
LH Pin End Master 1 9G-8584 6Y-9264
RH Bushing End Master 1 9G-8585 9G-8585
LH Bushing End Master 1 9G-8586 9G-8586
RH Regular 38 9G-8581 6Y-9261
LH Regular 38 9G-8582 6Y-9262
Other Components
Pin 39 154-3664* 160-7816
Bushing 39 9G-8588 9G-8588
Seal Assembly 78 3T-5634 8E-9640**
Thrust Ring 78 9G-8591 6Y-6486
Stopper 39 5G-2247 5G-2247
Plug 39 6Y-0473 6Y-0473
Track Hardware***
Bolt 152 9G-3110 9G-3110
Nut 152 1M-1408 1M-1408
Master Bolt 2 9G-8592 9G-8592
Master Bolt 2 3T-8601 3T-8601
Special Sets/Groups
Seal Set (88 Seal Assemblies) 1 — 103-1068
Bushing and Seal Group (39 Sections) 1 6Y-3879 6Y-5404
* Former part number 9K-8550 (Use 9G-1642 stopper). ** Rigid seal assembly.
D4H XL SEALED AND LUBRICATED TRACK
8PJ1-663
6.75” (171.5 mm) PITCH — 5/8” BOLT
FORMER
PART PART
QUANTITY NUMBER NUMBER
Link Assembly — 41 Section 2 — 8E-9817
Track Links
RH Pin End Master 1 9G-8583 6Y-9263
LH Pin End Master 1 9G-8584 6Y-9264
RH Bushing End Master 1 9G-8585 9G-8585
LH Bushing End Master 1 9G-8586 9G-8586
RH Regular 40 9G-8581 6Y-9261
LH Regular 40 9G-8582 6Y-9262
Other Components
Pin 41 154-3664* 160-7816
Bushing 41 9G-8588 9G-8588
Seal Assembly 82 3T-5634 8E-9640**
Thrust Ring 82 9G-8591 6Y-6486
Stopper 41 5G-2247 5G-2247
Plug 41 6Y-0473 6Y-0473
Track Hardware***
Bolt 160 9G-3110 9G-3110
Nut 160 1M-1408 1M-1408
Master Bolt 2 9G-8592 9G-8592
Master Bolt 2 3T-8601 3T-8601
Special Sets/Groups
Seal Set (88 Seal Assemblies) 1 — 103-1068
Bushing and Seal Group (39 Sections) 1 6Y-3879 6Y-5404
* Former part number 9K-8550 (Use 9G-1642 stopper). ** Rigid seal assembly.
D4H LGP, 561H SEALED AND LUBRICATED TRACK
3AC1-UP, 4NK1-163, 6NL1-382, 9DB1-UP, 9GJ1-1115
6.75” (171.5 mm) PITCH — 5/8” BOLT
FORMER
PART PART
QUANTITY NUMBER NUMBER
Link Assembly — 44 Section 2 — 6Y-5410
Track Links
RH Pin End Master 1 9G-8583 6Y-9263
LH Pin End Master 1 9G-8584 6Y-9264
RH Bushing End Master 1 9G-8585 9G-8585
LH Bushing End Master 1 9G-8586 9G-8586
RH Regular 43 9G-8581 6Y-9261
LH Regular 43 9G-8582 6Y-9262
Other Components
Pin 44 154-3664* 160-7816
Bushing 44 9G-8588 9G-8588
Seal Assembly 88 3T-5634 8E-9640**
Thrust Ring 88 9G-8591 6Y-6486
Stopper 44 5G-2247 5G-2247
Plug 44 6Y-0473 6Y-0473
Track Hardware***
Bolt 172 9G-3110 9G-3110
Bolt (Self-Cleaning Shoe) 86 9G-3110 9G-3110
Bolt (Self-Cleaning Shoe) 86 3T-3884 3T-3884
Nut 172 1M-1408 1M-1408
Master Bolt 2 9G-8592 9G-8592
Master Bolt 2 3T-8601 3T-8601
Master Bolt (Self-Cleaning Shoe) 2 9G-8592 9G-8592
Master Bolt (Self-Cleaning Shoe) 2 3T-3889 3T-3889
Special Sets/Groups
Seal Set (88 Seal Assemblies) 1 — 103-1068
Bushing and Seal Group (39 Sections) 1 6Y-3879 6Y-5404
* Former part number 9K-8550 (Use 9G-1642 stopper). ** Rigid seal assembly.
D4H ROTATING BUSHING TRACK*
2AC5597-UP, 8PB6091-UP
6.75” (171.5 mm) PITCH — 5/8” BOLT
PART
QUANTITY NUMBER
Link Assembly — 39 Section 2 152-8040
Track Links
RH Pin End Master 1 108-0949
LH Pin End Master 1 108-0950
RH Bushing End Master+ 1 165-1748
LH Bushing End Master+ 1 165-1749
RH Regular+ 38 165-1746
LH Regular+ 38 164-1747
Other Components
Pin 39 152-8075
Bushing 39 165-1767
Seal Assembly (Rigid) 156 110-7011
Thrust Ring 156 152-8069
Stopper 39 5G-2247
Plug 39 6Y-0473
Track Hardware**
Bolt 152 9G-3110
Nut 152 1M-1408
Master Bolt 2 9G-8592
Master Bolt 2 3T-8601
* Rotating Bushing Track is an application specific undercarriage designed for high abrasion/low impact applications (4,000 hour system life or less). When installing Rotating Bushing Track on existing machines, refer to IRM UC95-11 for installation and guarding information. Also refer to Special Instruction SEHS9805 for additional guarding information. For servicing information refer to Special Instruction SEHS9542. This product is not for use on Track Skidders and 561H Pipelayers.
** Not part of link assembly; required to assemble track group. + Joint assemblies (includes link and insert). Insert not serviced.
D5M XL, D4H XL ROTATING BUSHING TRACK*
8PJ664-UP, 6N1-UP, 5ES1-UP, 4BR1-UP, 4JS1-UP
6.75” (171.5 mm) PITCH — 5/8” BOLT
PART
QUANTITY NUMBER
Link Assembly — 41 Section 2 152-8039
Track Links
RH Pin End Master 1 108-0949
LH Pin End Master 1 108-0950
RH Bushing End Master+ 1 165-1748
LH Bushing End Master+ 1 165-1749
RH Regular+ 40 165-1746
LH Regular+ 40 164-1747
Other Components
Pin 41 152-8075
Bushing 41 165-1767
Seal Assembly (Rigid) 164 110-7011
Thrust Ring 164 152-8069
Stopper 41 5G-2247
Plug 41 6Y-0473
Track Hardware**
Bolt 160 9G-3110
Nut 160 1M-1408
Master Bolt 2 9G-8592
Master Bolt 2 3T-8601
* Rotating Bushing Track is an application specific undercarriage designed for high abrasion/low impact applications (4,000 hour system life or less). When installing Rotating Bushing Track on existing machines, refer to IRM UC95-11 for installation and guarding information. Also refer to Special Instruction SEHS9805 for additional guarding information. For servicing information refer to Special Instruction SEHS9542. This product is not for use on Track Skidders and 561H Pipelayers.
** Not part of link assembly; required to assemble track group. + Joint assemblies (includes link and insert). Insert not serviced.
D5M LGP, D4H LGP ROTATING BUSHING TRACK*
9GJ1116-UP, 4NK164-UP, 3CR1-UP, 6AS1-UP, 3DR1-UP, 5FS1-UP, 7LR1-UP
6.75” (171.5 mm) PITCH — 5/8” BOLT
PART
QUANTITY NUMBER
Link Assembly — 44 Section 2 152-8038
Track Links
RH Pin End Master 1 108-0949
LH Pin End Master 1 108-0950
RH Bushing End Master+ 1 165-1748
LH Bushing End Master+ 1 165-1749
RH Regular+ 43 165-1746
LH Regular+ 43 164-1747
Other Components
Pin 44 152-8075
Bushing 44 165-1767
Seal Assembly (Rigid) 176 110-7011
Thrust Ring 176 152-8069
Stopper 44 5G-2247
Plug 44 6Y-0473
Track Hardware**
Bolt 172 9G-3110
Nut 172 1M-1408
Master Bolt 2 9G-8592
Master Bolt 2 3T-8601
* Rotating Bushing Track is an application specific undercarriage designed for high abrasion/low impact applications (4,000 hour system life or less). When installing Rotating Bushing Track on existing machines, refer to IRM UC95-11 for installation and guarding information. Also refer to Special Instruction SEHS9805 for additional guarding information. For servicing information refer to Special Instruction SEHS9542. This product is not for use on Track Skidders and 561H Pipelayers.
** Not part of link assembly; required to assemble track group. + Joint assemblies (includes link and insert). Insert not serviced.
D5M LGP, D4H LGP HEAVY DUTY TRI/QUAD TRACK*
3CR1-UP, 3DR1-UP, 4NK164-UP, 5FS1-UP, 6AS1-UP, 7LR1-UP, 9GJ1116-UP
6.75” (171.5 mm) PITCH — 5/8” BOLT
QUAD TRI
TRACK TRACK PART
QUANTITY QUANTITY NUMBER
Link Assembly — 44 Section 2 2 108-0954**
Track Links
RH Regular 44 44+ 108-0947
LH Regular 44 44++ 108-0948
Other Components
Stub Pin 88 44 108-2639
Stub Bushing 88 44 108-2640
Track Hardware (Per side: Quad — 1 center chain & 2 outriggers; Tri — 1 center chain & 1 outrigger)+++
Bolt 344 258 9G-3110
Nut 344 258 1M-1408
Master Bolt 4 3 9G-8592
Master Bolt 4 3 3T-8601
* When installing Heavy Duty Track on existing machines refer to IRM UC94-18 for installation and guarding information. Also refer to Special Instruction SEHS9805 for additional guarding information. For more information about Quad or Tri Link track, refer to IRM 91-18 and special instruction SEHS8881.
** Refer to Heavy Duty Track Section for component information. + Required for right hand outrigger chain.
++ Required for left hand outrigger chain.
D5M, D4H, 561H TRACK SHOES
SEALED AND LUBRICATED TRACK, HEAVY DUTY TRACK, ROTATING BUSHING TRACK
6.75” (171.5 mm) PITCH — 5/8” BOLT
REGULAR PREFERRED ROLLER
SHOE PART FRAME USAGE
TYPE WIDTH NUMBER STD XL LGP 561H
Regular Roller Frame Usage
Extreme Service 18.0” (460 mm) 6Y-5624 Y Y Y Y
Extreme Service 20.0” (510 mm) 8E-9816 N Y Y Y
Extreme Service 22.0” (560 mm) 8E-9814 N Y Y N
Extreme Service 24.0” (610 mm) 1Q-4754 N Y Y N
Moderate Service 14.0” (355 mm) 3T-0356 Y N N N
Moderate Service 16.0” (405 mm) 3T-0358 Y N N N
Moderate Service 18.0” (460 mm) 3T-0360 Y Y N Y
Moderate Service (Center Punched) 18.0” (460 mm) 9W-3955 Y Y N N
Moderate Service 20.0” (510 mm) 8E-9812 N Y Y Y
Moderate Service 22.0” (560 mm) 8E-9810 N Y Y N
Moderate Service 24.0” (610 mm) 8E-4972 N N Y N
Moderate Service 26.0” (660 mm) 6I-9573 N N Y N
Moderate Service 30.0” (760 mm) 3T-6163 N N Y N
Self-Cleaning 30.0” (760 mm) 6T-0232 N N Y N
Quad (MS) 23.0” (585 mm) 9W-7984 N N Y N
Quad (MS) 30.0” (760 mm) 9W-8326 N N Y N
Tri (Off Set — ES) 18.0” (460 mm) 8E-8526 N N N N
Tri (Off Set — ES) 18.0” (460 mm) 8E-8527 N N N N
Tri (Off Set — MS) 18.0” (460 mm) 1Q-4632 N N N N
Tri (Off Set — MS) 18.0” (460 mm) 1Q-4631 N N N N
D5M, D4H, 561H SPROCKETS
HEAVY DUTY TRACK, ROTATING BUSHING TRACK
PART
(PER SIDE) QUANTITY NUMBER
Sprocket Segment 5 108-0946
Bolt 20 3S-8182
Nut 20 7H-3607
Washer 20 6V-4316
D5M, D4H, 561H SPROCKETS
SEALED AND LUBRICATED TRACK
PART
(PER SIDE) QUANTITY NUMBER
Sprocket Segment 5 6Y-5245
Bolt 20 3S-8182
Nut 20 7H-3607
Washer 20 6V-4316
D5M, D4H, 561H TRACK ROLLERS
CURRENT DESIGN (SYMMETRIC SEALS), USE WITH 7 ROLLER FRAME CONFIGURATION
GROUPS PART
(PER MACHINE) QUANTITY NUMBER
Double Flange (DF) Roller Group 6 124-8240
Single Flange (SF) Roller Group 8 124-8237
Double Flange (DF, Tall Flange) Roller Group * 124-8243
Components of Group
Roller Shell (DF) 1 124-8241
Roller Shell (SF) 1 124-8238
Roller Shell (DF, Tall Flange) 1 124-8244
Bushing Assembly 2 124-8248
Shaft 1 131-7239
Ring (Retaining-Snap) 2 6V-6768
Ring (Lock) 2 6H-7382
End Collar 2 132-1951
Seal — Duo-Cone Group (Symmetric) 2 9W-5224
Toric Ring** 2 1M-3097
Seal — Bushing O-Ring 2 1H-8128
Seal — Shaft O-Ring 2 7F-8267
Stopper 1 7G-4332
Plug 1 6Y-0473
Mounting Hardware (D5M)+
Bolt (16 mm) 4 8T-0357
Washer 4 5P-8247
Mounting Hardware (D4H, 561H)+
Bolt (5/8”) 4 1A-8537
Washer 4 5P-8247
Special Application Seals (Low/High Temperature)
Seal - Duo-Cone Group 2 5K-6191
Toric Ring** 2 2S-2181
D5M LGP TRACK ROLLERS
CURRENT DESIGN (SYMMETRIC SEALS), USE WITH 8 ROLLER FRAME CONFIGURATION
3CR1232-UP, 3DR464-UP
GROUPS PART
(PER MACHINE) QUANTITY NUMBER
Double Flange (DF) Roller Group 8 124-8240
Single Flange (SF) Roller Group 8 124-8237
Double Flange (DF, Tall Flange) Roller Group * 124-8243
Components of Group
Roller Shell (DF) 1 124-8241
Roller Shell (SF) 1 124-8238
Roller Shell (DF, Tall Flange) 1 124-8244
Bushing Assembly 2 124-8248
Shaft 1 131-7239
Ring (Retaining-Snap) 2 6V-6768
Ring (Lock) 2 6H-7382
End Collar 2 132-1951
Seal — Duo-Cone Group (Symmetric) 2 9W-5224
Toric Ring** 2 1M-3097
Seal — Bushing O-Ring 2 1H-8128
Seal — Shaft O-Ring 2 7F-8267
Stopper 1 7G-4332
Plug 1 6Y-0473
Mounting Hardware+
Bolt (16 mm) 4 8T-0357
Washer 4 5P-8247
Special Application Seals (Low/High Temperature)
Seal - Duo-Cone Group 2 5K-6191
Toric Ring** 2 2S-2181
* Optional DF roller for guiding; use quantity required for specific roller frame type.
** Component of preceding assembly or group; quantity shown is quantity per assembly or group.
D4H, 561H TRACK ROLLERS
FORMER DESIGN (BOLT-ON RETAINER), INCH MOUNTING HARDWARE
FORMER
GROUPS PART
(PER MACHINE) QUANTITY NUMBER
Double Flange (DF) Roller Group 6 —
Single Flange (SF) Roller Group 8 —
Components of Group
Roller Shell (DF) 1 7G-4832
Roller Shell (SF) 1 7G-4833
Bearing* 2 8P-7002
Shaft 1 8E-6573
Retainer Assembly 2 3T-9538
Thrust Washer** 1 9G-9351
Dowel** 4 1L-5072
Bolt 12 0S-1594
Washer 12 5M-2894
Stabilizer Ring 2 7T-4030
Seal — Duo-Cone Group (Inverted) 2 7T-4080
Toric Ring* 1 8P-7003
O-Ring* 1 6V-2699
Seal — Retainer O-Ring 2 1H-6227
Stopper 1 7G-4332
Plug 1 6Y-0473
Mounting Hardware+
End Cap 2 7G-4829
Bolt (5/8”) 4 1B-4367
Washer 4 5P-8247
Special Application Seals (Low/High Temperature)
Seal — Duo-Cone Group 2 7T-4086
Toric Ring* 1 7T-4087
O-Ring* 1 6V-2699
* Component of preceding assembly or group, quantity shown is quantity per assembly or group. ** These components are only to repair retainer assembly. See Special Instruction SEHS8515.
D5M XL, D4H XL, D4H IDLERS
CURRENT DESIGN (SYMMETRIC SEALS)
REAR IDLER FRONT IDLER
SMALL DIA. LARGE DIA.
(PER MACHINE) QUANTITY PART NUMBER PART NUMBER
Idler Group 2 160-9753 160-9754
Components of Group
Idler Assembly 1 186-3566 186-3584
Bearing* 2 8P-7002 8P-7002
Shaft 1 160-9757 160-9757
Collar 2 160-9756 160-9756
Retainer 2 160-9761 160-9761
Thrust Washer 2 137-9518 137-9518
Bolt 12 053-2294 053-2294
Washer 12 5M-2894 5M-2894
Seal — Duo-Cone Group 2 161-7247 161-7247
Toric Ring* 2 161-7249 161-7249
Seal — Collar 1 5K-0216 5K-0216
Seal — Retainer 2 2H-4145 2H-4145
Stopper 1 3T-9536 3T-9536
Plug 1 6Y-0473 6Y-0473
Mounting Hardware (D5M XL)+
End Cap 2 108-1138 108-1138
Block 2 108-1136 108-1136
Bolt (16 mm) 4 8T-0282 8T-0282
Washer 4 5P-8247 5P-8247
Shim (Front Idlers Only) 4 3W-4346 3W-4346
Mounting Hardware (D4H, D4H XL)+
End Cap 2 9N-4683 9N-4683
Block 2 9N-4680 9N-4680
Bolt (5/8”) 4 1A-8651 1A-8651
Washer 4 5P-8247 5P-8247
Shim (Front Idlers Only) 4 3W-4346 3W-4346
* Component of preceding assembly or group; quantity shown is quantity per assembly or group.
D5M LGP, D4H LGP, 561H IDLERS
CURRENT DESIGN (SYMMETRIC SEALS), LARGE TREAD DIAMETER
PART
(PER MACHINE) QUANTITY NUMBER
Idler Group 4 160-9753
Components of Group
Idler Assembly 1 186-3566
Bearing* 2 8P-7002
Shaft 1 160-9757
Collar 2 160-9756
Retainer 2 160-9761
Thrust Washer 2 137-9518
Bolt 12 053-2294
Washer 12 5M-2894
Seal — Duo-Cone Group (Symmetric) 2 161-7247
Toric Ring* 2 161-7249
Seal — Collar 2 5K-0216
Seal — Retainer 2 2H-4145
Stopper 1 3T-9536
Plug 1 6Y-0473
Mounting Hardware (D5M LGP)+
End Cap 2 108-1138
Block 2 108-1136
Bolt (16 mm) 4 8T-0282
Washer 4 5P-8247
Shim (Front Idlers Only) 4 3W-4346
Mounting Hardware (D4H LGP, 561H)+
End Cap 2 9N-4683
Block 2 9N-4680
Bolt (5/8”) 4 1A-8651
Washer 4 5P-8247
Shim (Front Idlers Only) 4 3W-4346
* Component of preceding assembly or group; quantity shown is quantity per assembly or group.
D5M XL, D4H XL, D4H IDLERS
FORMER DESIGN
REAR IDLER FRONT IDLER
SMALL DIA. LARGE DIA.
(PER MACHINE) QUANTITY PART NUMBER PART NUMBER
Idler Group 2 — —
Components of Group
Idler Assembly 1 183-3584 186-3566
Bearing* 2 8P-7002 8P-7002
Shaft 1 6T-2620 6T-2620
Retainer 2 6T-2619 6T-2619
Thrust Washer 1 137-9518 137-9518
Bolt 12 053-2294 053-2294
Washer 12 5M-2894 5M-2894
Stabilizer Ring 2 7T-4030 7T-4030
Seal — Duo-Cone Group 2 7T-4080 7T-4080
Toric Ring* 1 8P-7003 8P-7003
O-Ring* 1 6V-2697 6V-2697
Seal — Retainer 2 2H-4145 2H-4145
Stopper 1 3T-9536 3T-9536
Plug 1 6Y-0473 6Y-0473
Mounting Hardware (D5M XL)+
End Cap 2 108-1138 108-1138
Block 2 108-1136 108-1136
Bolt (16 mm) 4 8T-0282 8T-0282
Washer 4 5P-8247 5P-8247
Shim (Front Idlers Only) 4 3W-4346 3W-4346
Mounting Hardware (D4H, D4H XL)+
End Cap 2 9N-4683 9N-4683
Block 2 9N-4680 9N-4680
Bolt (5/8”) 4 1A-8651 1A-8651
Washer 4 5P-8247 5P-8247
Shim (Front Idlers Only) 4 3W-4346 3W-4346
Special Application Seals
Seal — Duo-Cone Group 2 7T-4086 7T-4086
Toric Ring* 1 7T-4087 7T-4087
O-Ring* 1 6V-2699 6V-2699
* Component of preceding assembly or group; quantity shown is quantity per assembly or group.
D5M LGP, D5M XL, D4H, D4H LGP, D4H XL, 561H IDLERS
FORMER DESIGN, LARGE TREAD DIAMETER
PART
(PER MACHINE) QUANTITY NUMBER
Idler Group 4 —
Components of Group
Idler Assembly 1 186-3566
Bearing* 2 8P-7002
Shaft 1 6T-2620
Retainer 2 6T-2619
Thrust Washer 2 137-9518
Bolt 12 053-2294
Washer 12 5M-2894
Stabilizer Ring 2 7T-4030
Seal — Duo-Cone Group 2 7T-4080
Toric Ring* 1 8P-7003
O-Ring* 1 6V-2699
Seal — Retainer 2 2H-4145
Stopper 1 3T-9536
Plug 1 6Y-0473
Mounting Hardware (D5M LGP, D5M XL)+
End Cap 2 108-1138
Block 2 108-1136
Bolt (16 mm) 4 8T-0282
Washer 4 5P-8247
Shim (Front Idlers Only) 4 3W-4346
Mounting Hardware (D4H, D4H LGP, D4H XL, 561H)+
End Cap 2 9N-4683
Block 2 9N-4680
Bolt (5/8”) 4 1A-8651
Washer 4 5P-8247
Shim (Front Idlers Only) 4 3W-4346
Special Application Seals
Seal — Duo-Cone Group 2 7T-4086
Toric Ring* 1 7T-4087
O-Ring* 1 6V-2699
* Component of preceding assembly or group; quantity shown is quantity per assembly or group.
D5M, D4H CARRIER ROLLERS
PART
(PER MACHINE) QUANTITY NUMBER
Group 2 6K-9880
Components of Group
Roller Shell 1 9W-6174
Shaft 1 6K-9861
Plate 1 6K-9860
Bolt 2 6V-4791
Cup 2 1M-8736
Cone 2 1M-8735
Ring 1 1M-7914
Cover 1 3K-6638
Collar Assembly 1 1M-7918
Plug 1 2P-0347
Bolt 3 0L-1351
Seal — Duo-Cone Group 1 9W-5224
Toric Ring* 2 1M-3097
Seal — Cover 1 5H-8848
Seal — Plug 1 1S-8947
Seal — Shaft O-Ring 1 1H-9696
Special Application Seals
Seal — Duo-Cone Group 1 5K-6191
Toric Ring* 1 2S-2181
* Component of preceding group; quantity shown is the quantity per group.
D5M LGP, D5M XL END GUIDING GUARDS
METRIC HARDWARE (USE WITH D5M LGP 7 ROLLER FRAME CONFIGURATION)
PART
(PER MACHINE) QUANTITY NUMBER
Front
Guard Assembly 2 109-0058
Guard Assembly 2 109-0059
Wear Strip 4 109-1231
Bolt (12 mm) 12 8T-4192
Washer 12 8T-4223
Rear
Guard Assembly 2 109-0060
Guard Assembly 2 109-0061
Wear Strip 4 109-1231
Bolt (12 mm) 12 8T-4192
Washer 12 8T-4223
D5M LGP END GUIDING GUARDS
METRIC HARDWARE (USE WITH 8 ROLLER FRAME CONFIGURATION)
3CR1232-UP, 3DR464-UP
PART
(PER MACHINE) QUANTITY NUMBER
Front
Guard Assembly 2 183-5213
Guard Assembly 2 183-5214
Wear Strip 4 109-1231
Bolt (12 mm) 12 8T-4192
Washer 12 8T-4223
Rear
Guard Assembly 2 183-5949
Guard Assembly 2 183-5950
Wear Strip 4 109-1231
Bolt (12 mm) 12 8T-4192
Washer 12 8T-4223
D4H, D4H LGP, D4H XL, 561H END GUIDING GUARDS
HEAVY DUTY AND ROTATING BUSHING TRACK ONLY (INCH MOUNTING HARDWARE)
PART
(PER MACHINE) QUANTITY NUMBER
Front
Guard Assembly 2 108-3990
Guard Assembly 2 108-3995
Bolt 12 5P-2228
Washer 12 8T-4223
Strip 4 9U-9198
Spacer* 4 108-4250
Rear
Guard Assembly 2 108-3998
Guard Assembly 2 108-4002
Bolt 12 5P-2228
Washer 12 8T-4223
Strip 4 9U-9198
Spacer* 4 108-4250
D4H, D4H LGP, D4H XL, 561H END GUIDING GUARDS
SEALED AND LUBRICATED TRACK ONLY (INCH MOUNTING HARDWARE)
PART
(PER MACHINE) QUANTITY NUMBER
Front
Guard Assembly 2 8E-9766
Guard Assembly 2 8E-9767
Bolt 12 5P-2228
Washer 12 8T-4223
Strip 4 9U-9198
Rear
Guard Assembly 2 6Y-9925
Guard Assembly 2 6Y-9926
Bolt 12 5P-2228
Washer 12 8T-4223
Strip 4 9U-9198
D5M XL TRACK ROLLER GUARDS (FULL LENGTH)
METRIC MOUNTING HARDWARE
PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 2 108-4030
Guard Assembly 2 108-4031
Spacer (Mounting) 28 8G-5258
Bolt - Mounting (16 mm) 28 8T-4140
Tube 8 8V-4772
Bolt - Cross-Tube (16 mm) 8 110-6968
Washer 16 9X-8257
Nut (16 mm) 8 8T-4778
Plate 2 108-4016
Plate 2 108-4017
Bolt (12 mm) 12 8T-4139
Washer 12 8T-4223
D5M LGP TRACK ROLLER GUARDS (FULL LENGTH)
METRIC MOUNTING HARDWARE (USE WITH 7 ROLLER FRAME CONFIGURATION)
PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 2 108-4033
Guard Assembly 2 108-4036
Spacer (Mounting) 36 8G-5258
Bolt - Mounting (16 mm) 36 8T-4140
Tube 10 8V-4772
Bolt - Cross-Tube (16 mm) 10 110-6968
Washer 20 9X-8257
Nut (16 mm) 10 8T-4778
Plate 2 108-4016
Plate 2 108-4017
Bolt (12 mm) 12 8T-4139
Washer 12 8T-4223
D5M LGP TRACK ROLLER GUARDS (FULL LENGTH)
METRIC MOUNTING HARDWARE (USE WITH 8 ROLLER FRAME CONFIGURATION)
3CR1232-UP, 3DR464-UP
PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 2 183-5204
Guard Assembly 2 183-5207
Spacer (Mounting) 28 183-8464
Bolt - Mounting (16 mm) 28 8T-4140
Tube 10 8V-4772
Bolt - Cross-Tube (16 mm) 10 110-6968
Washer 20 9X-8257
Nut (16 mm) 10 8T-4778
Plate 4 183-8468
Bolt (12 mm front) 4 8T-4956
Bolt (12 mm front) 4 8T-4183
Bolt (12 mm rear) 4 8T-4139
Washer 12 8T-4223
D4H TRACK ROLLER GUARDS (FULL LENGTH)
HEAVY DUTY AND ROTATING BUSHING TRACK ONLY (INCH MOUNTING HARDWARE)
PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 2 108-4018
Guard Assembly 2 108-4020
Tube 4 8V-4772
Bolt 4 5P-4625
Bolt 28 8T-8924
Bolt 12 8T-8917
Washer 12 8T-4223
Washer 8 8T-4122
Nut 4 3K-2889
Plate 2 108-4016
Plate 2 108-4017
Spacer 28 6K-5640
D4H XL TRACK ROLLER GUARDS (FULL LENGTH)
HEAVY DUTY AND ROTATING BUSHING TRACK ONLY (INCH MOUNTING HARDWARE)
PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 2 108-4030
Guard Assembly 2 108-4031
Tube 8 8V-4772
Bolt 8 5P-4625
Bolt 28 8T-8924
Bolt 12 8T-8917
Washer 12 8T-4223
Washer 16 8T-4122
Nut 8 3K-2889
Plate 2 108-4016
Plate 2 108-4017
Spacer 28 6K-5640
D4H LGP TRACK ROLLER GUARDS (FULL LENGTH)
HEAVY DUTY AND ROTATING BUSHING TRACK ONLY (INCH MOUNTING HARDWARE)
PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 2 108-4033
Guard Assembly 2 108-4036
Tube 10 8V-4772
Bolt 10 5P-4625
Bolt 36 8T-8924
Bolt 12 8T-8917
Washer 12 8T-4223
Washer 20 8T-4122
Nut 10 3K-2889
Plate 2 108-4016
Plate 2 108-4017
Spacer 36 6K-5640
D4H TRACK ROLLER GUARDS (FULL LENGTH)
SEALED AND LUBRICATED TRACK ONLY (INCH MOUNTING HARDWARE)
PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 2 6Y-9932
Guard Assembly 2 6Y-9933
Tube 4 8V-4772
Bolt 4 5P-4625
Bolt 28 8T-8924
Bolt 16 8T-8917
Washer 16 8T-4223
Washer 8 8T-4122
Washer 4 3K-2889
Plate 4 8Y-0356
Spacer 28 6K-5640
D4H XL TRACK ROLLER GUARDS (FULL LENGTH)
SEALED AND LUBRICATED TRACK ONLY (INCH MOUNTING HARDWARE)
PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 2 8E-9704
Guard Assembly 2 8E-9705
Tube 8 8V-4772
Bolt 8 5P-4625
Bolt 28 8T-8924
Bolt 16 8T-8917
Washer 16 8T-4223
Washer 16 8T-4122
Washer 8 3K-2889
Plate 4 8Y-0356
Spacer 28 6K-5640
D4H LGP TRACK ROLLER GUARDS (FULL LENGTH)
SEALED AND LUBRICATED TRACK ONLY (INCH MOUNTING HARDWARE)
PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 2 6Y-9949
Guard Assembly 2 6Y-9939
Tube 10 8V-4772
Bolt 10 5P-4625
Bolt 40 8T-8924
Bolt 16 8T-8917
Washer 16 8T-4223
Washer 20 8T-4122
Washer 10 3K-2889
Plate 4 8Y-0356
Spacer 40 6K-5640
D5M LGP, D5M XL CENTER GUIDING GUARDS
HEAVY DUTY AND ROTATING BUSHING TRACK ONLY (METRIC MOUNTING HARDWARE)
PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 2 183-8467
Bolt 8 8T-4140
Spacer 8 183-8464
D4H, D4H LGP, D4H XL, 561H CENTER GUIDING GUARDS
HEAVY DUTY AND ROTATING BUSHING TRACK ONLY (INCH MOUNTING HARDWARE)
PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 2 108-4022
Bolt 8 8T-8924
Spacer 8 6K-5640
D4H, D4H LGP, D4H XL CENTER GUIDING GUARDS
SEALED AND LUBRICATED TRACK ONLY (INCH MOUNTING HARDWARE)
PART
(PER MACHINE) QUANTITY NUMBER
Guard Assembly 4 6Y-9934
Bolt 4 5P-4625
Bolt 8 8T-8924
Bolt 16 7X-3328
Washer 8 8T-4122
Washer 16 8T-4223
Lock Nut 4 3K-2889
Tube 4 8V-4772
Bar 4 6Y-9935
Spacer 8 6K-5640
D5H HEAVY DUTY SEALED AND LUBRICATED TRACK*
1YD5522-UP, 3MD5598-UP, 7NC5525-UP, 8RC5890-UP
7.50” (190.5 mm) PITCH — 3/4” BOLT
PART
QUANTITY NUMBER
Link Assembly — 37 Section 2 106-1635
Track Links
RH Pin End Master 1 106-1627
LH Pin End Master 1 106-1628
RH Bushing End Master 1 106-1629
LH Bushing End Master 1 106-1630
RH Regular 36 106-1625
LH Regular 36 106-1626
Other Components
Pin 37 154-7311
Bushing 37 106-1618
Seal Assembly (Rigid) 74 8E-9642
Thrust Ring 74 152-8070
Stopper 37 5G-2247
Plug 37 6Y-0473
Track Hardware**
Bolt 144 6V-1792
Nut 144 1S-1860
Master Bolt 2 107-0719
Master Bolt 2 106-1642
Special Sets/Groups
Seal Set (92 Seal Assemblies) 1 103-1070
Bushing and Seal Group (37 Sections) 1 115-2439
* When installing Heavy Duty Track on existing machines, refer to IRMs UC93-21and UC94-17. Master shoe required with heavy duty track. Also refer to Special Instructions SEHS9797 and SEHS9585 for additional guarding and track shoe rework options.
D5H XL HEAVY DUTY SEALED AND LUBRICATED TRACK*
8RJ4217-UP
7.50” (190.5 mm) PITCH — 3/4” BOLT
PART
QUANTITY NUMBER
Link Assembly — 39 Section 2 106-1637
Track Links
RH Pin End Master 1 106-1627
LH Pin End Master 1 106-1628
RH Bushing End Master 1 106-1629
LH Bushing End Master 1 106-1630
RH Regular 38 106-1625
LH Regular 38 106-1626
Other Components
Pin 39 154-7311
Bushing 39 106-1618
Seal Assembly (Rigid) 78 8E-9642
Thrust Ring 78 152-8070
Stopper 39 5G-2247
Plug 39 6Y-0473
Track Hardware**
Bolt 152 6V-1792
Nut 152 1S-1860
Master Bolt 2 107-0719
Master Bolt 2 106-1642
Special Sets/Groups
Seal Set (92 Seal Assemblies) 1 103-1070
Bushing and Seal Group (37 Sections) 1 115-2439
* When installing Heavy Duty Track on existing machines, refer to IRMs UC93-18 and UC94-17 for installation and guarding information. Also refer to Special Instruction SEHS9797 for additional guarding information and SEHS9725 for shoe rework options. For more information about quad and tri link track, refer to IRM UC91-18 and special instructions SEHS8881. Master shoe required with heavy duty track.
D6M XL HEAVY DUTY SEALED AND LUBRICATED TRACK*
2YS1-UP, 3WN1-UP, 4HS1-UP, 5WR1-UP, 6LR1-UP, 9ZM1-UP
7.50” (190.5 mm) PITCH — 3/4” BOLT
PART
QUANTITY NUMBER
Link Assembly — 40 Section 2 110-2976
Track Links
RH Pin End Master 1 106-1627
LH Pin End Master 1 106-1628
RH Bushing End Master 1 106-1629
LH Bushing End Master 1 106-1630
RH Regular 39 106-1625
LH Regular 39 106-1626
Other Components
Pin 40 154-7311
Bushing 40 106-1618
Seal Assembly (Rigid) 80 8E-9642
Thrust Ring 80 152-8070
Stopper 40 5G-2247
Plug 40 6Y-0473
Track Hardware**
Bolt 156 6V-1792
Nut 156 1S-1860
Master Bolt 2 107-0719
Master Bolt 2 106-1642
Special Sets/Groups
Seal Set (92 Seal Assemblies) 1 103-1070
Bushing and Seal Group (37 Sections) 1 115-2439
* When installing Heavy Duty Track on existing machines, refer to IRMs UC93-21and UC94-17. Master shoe required with heavy duty track. Also refer to Special Instructions SEHS9797 and SEHS9585 for additional guarding and track shoe rework options.
D6M LGP, D5H LGP HEAVY DUTY SEALED AND LUBRICATED TRACK*
1DD5879-UP, 2RN1-UP, 2SD5552-UP, 4GS1-UP, 4JN1-UP, 4KD5588-UP, 5NR1-UP, 9HC5520-UP
7.50” (190.5 mm) PITCH — 3/4” BOLT
PART
QUANTITY NUMBER
Link Assembly — 46 Section 2 106-1636
Track Links
RH Pin End Master 1 106-1627
LH Pin End Master 1 106-1628
RH Bushing End Master 1 106-1629
LH Bushing End Master 1 106-1630
RH Regular 45 106-1625
LH Regular 45 106-1626
Other Components
Pin 46 154-7311
Bushing 46 106-1618
Seal Assembly (Rigid) 92 8E-9642
Thrust Ring 92 152-8070
Stopper 46 5G-2247
Plug 46 6Y-0473
Track Hardware**
Bolt (Grouser shoe) 180 6V-1792
Bolt (Self-Cleaning Shoe) 90 6V-1792
Bolt (Self-Cleaning Shoe) 90 107-0718
Nut 180 1S-1860
Master Bolt (Grouser shoe) 2 107-0719
Master Bolt (Grouser shoe) 2 106-1642
Master Bolt (Self-Cleaning Shoe) 2 107-0719
Master Bolt (Self-Cleaning Shoe) 2 107-0717
Special Sets/Groups
Seal Set (92 Seal Assemblies) 1 103-1070
Bushing and Seal Group (37 Sections) 1 115-2439
* When installing Heavy Duty Track on existing machines, refer to IRMs UC93-21and UC94-17. Master shoe required with heavy duty track. Also refer to Special Instructions SEHS9797 and SEHS9585 for additional guarding and track shoe rework options.
D6M, D5H HEAVY DUTY SEALED AND LUBRICATED TRACK*
FINE GRADER MACHINE
1DD, 9HC
7.50” (190.5 mm) PITCH — 3/4” BOLT
PART
QUANTITY NUMBER
Link Assembly — 47 Section 2 106-1634
Track Links
RH Pin End Master 1 106-1627
LH Pin End Master 1 106-1628
RH Bushing End Master 1 106-1629
LH Bushing End Master 1 106-1630
RH Regular 46 106-1625
LH Regular 46 106-1626
Other Components
Pin 47 154-7311
Bushing 47 106-1618
Seal Assembly (Rigid) 94 8E-9642
Thrust Ring 94 152-8070
Stopper 47 5G-2247
Plug 47 6Y-0473
Track Hardware**
Bolt 184 6V-1792
Nut 184 1S-1860
Master Bolt (Grouser shoe) 2 107-0719
Master Bolt (Grouser shoe) 2 106-1642
Master Bolt (Self-Cleaning Shoe) 2 107-0719
Master Bolt (Self-Cleaning Shoe) 2 107-0717
Special Sets/Groups
Seal Set (92 Seal Assemblies) 1 103-1070
Bushing and Seal Group (37 Sections) 1 115-2439
* When installing Heavy Duty Track on existing machines, refer to IRMs UC93-21and UC94-17. Master shoe required with heavy duty track. Also refer to Special Instructions SEHS9797 and SEHS9585 for additional guarding and track shoe rework options.
D5H STD SEALED AND LUBRICATED TRACK
1YD1-5521, 3MD1-5597, 7NC1-5524, 8RC1-5889
7.50” (190.5 mm) PITCH — 5/8” BOLT
FORMER
PART PART
QUANTITY NUMBER NUMBER
Link Assembly — 37 Section 2 — 6Y-5412
Track Links
RH Pin End Master 1 — 8E-0885
LH Pin End Master 1 — 8E-0886
RH Bushing End Master 1 — 8E-0887
LH Bushing End Master 1 — 8E-0888
RH Regular 36 3T-8405 6Y-9267
LH Regular 36 3T-8406 6Y-9268
Other Components
Pin 37 160-7818* 160-7818*
Bushing 37 6Y-0929 6Y-0929
Seal Assembly 74 3T-5631 8E-9642**
Thrust Ring 74 9G-3106 6Y-6481
Stopper 37 5G-2247 5G-2247
Plug 37 6Y-0473 6Y-0473
Track Hardware***
Bolt 144 9G-3110 9G-3110
Nut 144 1M-1408 1M-1408
Master Bolt 2 3T-8580 3T-8580
Master Bolt 2 3T-8601 3T-8601
Special Sets/Groups
Seal Set (92 Seal Assemblies) 1 — 103-1070
Bushing and Seal Group (37 Sections) 1 6Y-3880 6Y-5405
* Former pin 3P-3880 (Use 9G-1642 stopper). ** Rigid seal.
D5H XL SEALED AND LUBRICATED TRACK
8RJ1-4216
7.50” (190.5 mm) PITCH — 5/8” BOLT
FORMER
PART PART
QUANTITY NUMBER NUMBER
Link Assembly — 39 Section 2 — 8E-9820
Track Links
RH Pin End Master 1 — 8E-0885
LH Pin End Master 1 — 8E-0886
RH Bushing End Master 1 — 8E-0887
LH Bushing End Master 1 — 8E-0888
RH Regular 38 3T-8405 6Y-9267
LH Regular 38 3T-8406 6Y-9268
Other Components
Pin 39 160-7818* 160-7818*
Bushing 39 6Y-0929 6Y-0929
Seal Assembly 78 3T-5631 8E-9642**
Thrust Ring 78 9G-3106 6Y-6481
Stopper 39 5G-2247 5G-2247
Plug 39 6Y-0473 6Y-0473
Track Hardware***
Bolt 152 9G-3110 9G-3110
Nut 152 1M-1408 1M-1408
Master Bolt 2 3T-8580 3T-8580
Master Bolt 2 3T-8601 3T-8601
Special Sets/Groups
Seal Set (92 Seal Assemblies) 1 — 103-1070
Bushing and Seal Group (37 Sections) 1 6Y-3880 6Y-5405
* Former pin 3P-3880 (Use 9G-1642 stopper). ** Rigid seal.
D5H LGP SEALED AND LUBRICATED TRACK
1DD1-5878, 2SD1-5551, 4KD1-5588, 9HC1-5519
7.50” (190.5 mm) PITCH — 5/8” BOLT
FORMER
PART PART
QUANTITY NUMBER NUMBER
Link Assembly — 46 Section 2 — 6Y-5414
Track Links
RH Pin End Master 1 — 8E-0885
LH Pin End Master 1 — 8E-0886
RH Bushing End Master 1 — 8E-0887
LH Bushing End Master 1 — 8E-0888
RH Regular 45 3T-8405 6Y-9267
LH Regular 45 3T-8406 6Y-9268
Other Components
Pin 46 160-7818* 160-7818*
Bushing 46 6Y-0929 6Y-0929
Seal Assembly 92 3T-5631 8E-9642**
Thrust Ring 92 9G-3106 6Y-6481
Stopper 46 5G-2247 5G-2247
Plug 46 6Y-0473 6Y-0473
Track Hardware
Bolt 180 9G-3110 9G-3110
Nut 180 1M-1408 1M-1408
Master Bolt (Grouser shoe) 2 3T-8580 3T-8580
Master Bolt (Grouser shoe) 2 3T-8601 3T-8601
Master Bolt (Self-Cleaning Shoe) 2 3T-8580 3T-8580
Master Bolt (Self-Cleaning Shoe) 2 3T-3889 3T-3889
Special Sets/Groups
Seal Set (92 Seal Assemblies) 1 — 103-1070
Bushing and Seal Group (37 Sections) 1 6Y-3880 6Y-5405
* Former pin 3P-3880 (Use 9G-1642 stopper). ** Rigid seal.
D5H SEALED AND LUBRICATED TRACK
FINE GRADER MACHINE
1DD, 9HC
7.50” (190.5 mm) PITCH — 5/8” BOLT
PART
QUANTITY NUMBER
Link Assembly — 47 Section 2 8E-4160
Track Links
RH Pin End Master 1 8E-0885
LH Pin End Master 1 8E-0886
RH Bushing End Master 1 8E-0887
LH Bushing End Master 1 8E-0888
RH Regular 46 6Y-9267
LH Regular 46 6Y-9268
Other Components
Pin 47 160-7818*
Bushing 47 6Y-0929
Seal Assembly (Rigid) 94 8E-9642
Thrust Ring 94 6Y-6481
Stopper 47 5G-2247
Plug 47 6Y-0473
Track Hardware**
Bolt 184 9G-3110
Nut 184 1M-1408
Master Bolt (Grouser shoe) 2 3T-8580
Master Bolt (Grouser shoe) 2 3T-8601
Master Bolt (Self-Cleaning Shoe) 2 3T-8580
Master Bolt (Self-Cleaning Shoe) 2 3T-3889
Special Sets/Groups
Seal Set (92 Seal Assemblies) 1 103-1070
Bushing and Seal Group (37 Sections) 1 6Y-5405
* Former pin 3P-3880 (Use 9G-1642 stopper).
