• No results found

Electrostatic sensor modeling for torque measurements

N/A
N/A
Protected

Academic year: 2020

Share "Electrostatic sensor modeling for torque measurements"

Copied!
6
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Figure 2. Torsional deformation of the beam. Figures adapted fromof a pointSzabó (2001)
Figure 3. Simple geometrical model of the charge holding particles.For a linear approximation the twist rate follows from Eqs
Figure 6. Regular discretization of the electret.
Figure 7. Potential planes ϕ(x,z)|y=const in two different heights. (a) y = −h + 14h. (b) y = −h + 12h.

References

Related documents

Overall, the current study has revealed university students with a higher level of resilience reported significantly higher levels of mindfulness, greater use of adaptive

For the poorest farmers in eastern India, then, the benefits of groundwater irrigation have come through three routes: in large part, through purchased pump irrigation and, in a

 A multiplexer is also called data selector , since is selects one of many inputs and steers the binary information to the output line..  The AND gates and inverters

In the present study anatomical and chemical properties of Dendrocalamus memberceus Munro species results are shows that number of vascular bundle frequency and

The log reduction of the studied microorganisms at various levels of gamma ray was signi fi cantly different, but the type of pomegranate juice (Fig. 3) showed no signi fi cant

Passed time until complete analysis result was obtained with regard to 4 separate isolation and identification methods which are discussed under this study is as

The results will be com- pared with the allocation schemes proposed by Wyglinski and the ones proposed under peak error rate constraint for OFDM and LP-OFDM systems.. The