Client: Nicor Gas
Project Description: Corrosion Control, Cathodic Protection & Integrity Management
Project Title: N/A
Location: Illinois USA
Multi-year contract providing corrosion control, cathodic protection and integrity management services since 2001. Primary responsibilities are corrosion services and system integrity programming for NICOR’s transmission and underground storage system facilities. Other responsibilities include ECDA and ICDA work; providing integrity management regulatory support; and cathodic protection design, troubleshooting, and construction coordination and oversight on distribution system facilities. CONSP-1
Client: United States Gypsum (USG)
Project Description: System Integrity and Management Project Title: N/A
Location: USA
Provide system integrity support including development of standards, procedures, forms and IMP documents. Performed an ECDA assessment. Provided complete support of all aspects of DOT 49 CFR Part 192. Developed and implemented an Operator Qualification program which included providing OQ training, and data management of their employee training records and recertification documentation. Perform faculty audits and mock emergency exercises. CONSP-2
N/A Client: Negev Natural Gas
Project Description: Distribution System Project Title: N/A
Location: Negev Region, Israel
Engineering Consultant providing engineering and design support for the development of the first natural gas system in Israel. Services include guidance with the development of specifications and standards for engineering and construction. Feasibility studies, hydraulic modeling, and system forecasting for the regions planned growth were completed. Detailed engineering design plans were reviewed and completed. Construction field support of the distribution system was provided. CONSP-3
Client: Alvord, Burdick & Howson
Project Description: Cathodic Protection Analysis & Design Water Pipeline Project Title: N/A
Location: Illinois USA
Performed a multi-year contract to provide cathodic protection analysis and design for large diameter water pipeline transmission mains. The contract included corrosion control monitoring and testing including test point readings, continuity testing, Panhandle Eastern Testing and close-interval survey. Testing was performed after installation at 6 months and 12 months. CONSP-4
Client: GE Energy
Project Description: External Corrosion & Direct Assessment Oil Pipeline Project Title: N/A
Location: Villahermosa, Mexico
Provided field and engineering assistance to Mexico's oil company (PEMEX Company) for the completion of external corrosion direct assessment (ECDA) and customized training services related to indirect inspection equipment for client's personnel. CONSP-5
Client: Midwest Energy Association (MEA)
Project Description: DIMP Guidance Plan Project Title: N/A
Location: MidWest USA
Worked with the Midwest Energy Association to develop a sample Distribution Integrity Management Program. Leveraging ENE’s experience and participation in the GPTC DIMP Guidance work, the Sample Program is intended to be used as a template to create a client- specific integrity plan that will be required for gas distribution companies in order to conform to new regulations. CONSP-6
Client: Texas A&M University
Project Description: Natural Gas Pipeline Selection & Routing Project Title: N/A
CONFIDENTIAL CLIENT
Client: Client Confidential
Project Description: Transmission Integrity Management Program Review Project Title: N/A
Location: Confidential
ENE was retained by the Client to complete an internal audit of the companies Transmission Integrity Management Program in their efforts to ensure compliance with 49 CFR Part 192 Subpart O. The project involved the review of specific aspects of the clients existing practices, tools and procedures for compliance with Subpart O, and industry best practice. ENE considered 49 CFR Part 192 Subpart O, ASME B31.8S, NACE RP0502, PHMSA Frequently Asked Questions, PHMSA Protocol documents, best practices, information learned during public meetings, along with ENE’s extensive experience during the review. ENE also reviewed the internal TRIMP organizational structure to determine project management effectiveness. As a deliverable, ENE provided a written report with specific recommendations on actions to improve compliance. CONSP-8
CONFIDENTIAL CLIENT
Client: Client Confidential
Project Description: Due Diligence – Interstate Pipeline Acquisition Project Title: N/A
Location: Confidential
Assisted private equity investor with the review of operating and maintenance practices and forecast capital expenditures related to expansion of a major interstate transmission pipeline holding company and its subsidiaries. Facilities were located in the United States east of the Rocky Mountains. CONSP-9
CONFIDENTIAL CLIENT
Client: Client Confidential
Project Description: Due Diligence – Gathering System Acquisition Project Title: N/A
Location: Confidential
Assisted private equity investor with the review of natural gas gathering and transmission system. Activities included assessment of attached production, evaluation of system capacity, market assessment and pipeline integrity evaluation.
Client: Pacific Gas and Electric
Project Description: Automatic Shut Off and Remote Control Valve Assessment
Project Title: N/A
Location: California USA
Performed a review of the use of Automatic Shut-off Valves (ASV) and Remote Control Valves (RCV) including industry nest practice, alternatives and merits of available technologies. In addition to reviewing pertinent industry literature and regulations, conducted a survey of natural gas transmission and distribution companies regarding their experiences with ASVs and RCVs.
Reviewed client’s historical, current, and proposed deployment of ASV and RCV equipment. Identified individual valve segments within the transmission system and prioritized based on factors including but not limited to population density, potential impact radius and blowdown time. CONSP-11
Client: Pacific Gas and Electric
Project Description: ASV/RCV Valve Estimating Project Title: N/A
Location: California USA
Developed unit cost approach to create project estimates for installation, replacement, or automation of existing valves in support of system upgrade initiative. Selected optimal valve locations based on defined program scope. Identified scope of work required to isolate each line segment and developed estimates for approximately eighty valve automation projects.
Provided work scope and cost estimate documentation as basis for engineering design work as well as inclusion in Public Utility Commission rate case filing.
CONSP-12
Client: Pacific Gas and Electric
Project Description: Cathodic Protection Record Stabilization Project Title: N/A
Location: California USA
Managed cathodic protection record stabilization team centralizing over 30,000 test points into single SAP database from paper records. Managed a team building Pipeline Feature Lists for MAOP Validation program. This team focused on
CONFIDENTIAL CLIENT
Client: Client Confidential
Project Description: Corrosion Control Monitoring Program – Transmission Line Assessment
Project Title: N/A
Location: Classified
Performed preliminary review of construction data and operating information including leak history for water transmission mains. Work included field testing and data gathering in order to design a cathodic protection system for the steel portions of each line. Tests conducted included current requirement testing, soil resistivity testing, and continuity testing along the pipeline right of way. Specific ground bed locations utilizing the existing easements were identified. ENE’s preliminary design report included test results, data analysis, written description of proposed cathodic protection system, bill of materials, and cost estimate for construction phase. ENE’s design drawings included ground bed locations, installation details, and typicals. Additionally, provided assistance to Client in obtaining permits, development of technical specifications for bidding, construction contract documents, and bid evaluations/recommendations. CONSP-14