Copyright remains the property of DIY DEN and copies may not be reproduced without permission (Your liscense permits one vehicle to be built from these plans) please contact don@diyden.net for info..
Page 01
Ver 01
Copyright remains the property of DIY DEN and copies may not be reproduced without permission (Your liscense permits one vehicle to be built from these plans) please contact don@diyden.net for info..
Page 02
Ver 01
Specification Length: 2850mm Width: 1680mm Height: 920mm Weight: +- 300kg Engine: 600-1100cc motorcycle (Yamaha R1 recommended) Rear rim/ tire: 315/35-17”Front rim/ tire: 185/60-14” or 195/55-15”
CHASSIS OVERVIEW
Copyright remains the property of
DIY DEN and may not be
reproduced without permission
Page 08
Ver 01
CHASSIS OVERVIEW
Copyright remains the property of
DIY DEN and may not be
reproduced without permission
Page 09
Ver 01
591 1103
1551 1637
Copyright remains the property of DIY DEN and copies may not be reproduced without permission (Your liscense permits one vehicle to be built from these plans) please contact don@diyden.net for info..
Page 12
Ver 01
FRAME BASE
QTY: 1 off required
3
6
TOP EXTENSION FRONT
Copyright remains the property of DIY DEN and copies may not be reproduced without permission (Your liscense permits one vehicle to be built from these plans) please contact don@diyden.net for info..
Page 15
Ver 01
MTL: 32mm x 1,6 mild steel
QTY: 2 off required
3 2 1 ,2 6 " 21 ° 398,6 15,69" 315,3 12,41"
FRAME CROSS MEMBER
Copyright remains the property of DIY DEN and copies may not be reproduced without permission (Your liscense permits one vehicle to be built from these plans) please contact don@diyden.net for info..
Page 17
Ver 01
MTL: 32mm x 1,6 mild steel
QTY: 5 off required
298 11,73" 3 2 1 ,2 6 "FRAME MID CROSSMEMBER
Copyright remains the property of DIY DEN and copies may not be reproduced without permission (Your liscense permits one vehicle to be built from these plans) please contact don@diyden.net for info..
Page 18
Ver 01
MTL: 32mm x 1,6 mild steel
QTY: 1 off required
372,3 14,66" 74° 74° 3 2 1 ,2 6 "FRAME TOP PICKUP
Page 19
MTL: 40mm x 4 m/steel angle
40 1,57" 4 ,16" 510 20,08" 75 2,95" 36014,17" 59 2,32" 39215,43" 4 5 ° 70 ° 70 ° 2 4 ,9 4 " 2 2 ,8 7 "O
10 ,39"O
10 ,39"Copyright remains the property of DIY DEN and copies may not be reproduced without permission (Your liscense permits one vehicle to be built from these plans) please contact don@diyden.net for info..
Ver 01
QTY: 1 off required
CHASSIS UPRIGHT
Copyright remains the property of DIY DEN and copies may not be reproduced without permission (Your liscense permits one vehicle to be built from these plans) please contact don@diyden.net for info..
Page 21
Ver 01
QTY: 4 off required
228 8,98" 3 2 1 ,2 6 "