Main Discipline Area (Skill Level)
Initial Design Hull Outfitting Plant Schematics BoCad Product Development
TM-0001 Training Setup
This manual is for AVEVA personnel only, to setup the Training Project for Customer training. Covers training project DB's for MDS, PDMS and related disciplines. PD Contact PD Product Manager PD Team Lead
A V E V A S c h e m a ti c s a n d E n g in e e ri n g
Admin Guide TM-3415 AVEVA PID (12.1) Admin Training TM-3401 AVEVA PID (12.1) Admin (PP)
User Guide
TM-3445 AVEVA PID (12.1) Training
TM-3423 AVEVA PID (12.1) Day1 Session1 (PP)
TM-3431 AVEVA PID (12.1) Day2 Session1 (PP)
TM-3460 TM-3460 AVEVA PID (12.1) Reports Training
TM-3461 AVEVA PID (12.1) PID Rep 1 (PP)
TBC AVEVA PID (12.1) Unintelligent Upgrade Training
TBC AVEVA PID (12.1) Unintelligent Upgrade Training (PP)
AVEVA Diagrams
TM-3501 AVEVA Diagrams Plant (12.1) Cable Diagrams
TM-3502 AVEVA Diagrams Plant (12.1) P&ID Designer
TM-3503 AVEVA Diagrams Plant (12.1) HVAC Diagrams
TM-3504 AVEVA Diagrams Plant (12.1) Administration
TM-3521 AVEVA Diagrams Marine (12.1) Cable Diagrams
TM-3522 AVEVA Diagrams Marine (12.1) P&ID Designer
TM-3523 AVEVA Diagrams Marine (12.1) HVAC Diagrams
TM-3524 AVEVA Diagrams Marine (12.1) Administration
TM-3541 AVEVA Plant (12.1) Schematic Model Manager
TM-3541 AVEVA Plant (12.1) Schematic Model Manager
TM-3542 AVEVA Plant (12.1) Schematic Model Manager , Admin
TM-3561 AVEVA Plant(12.1) Schematic 3D Integrator
TM-3562 AVEVA Marine (12.1) Schematic 3D Integrator
TM-3563 AVEVA Plant (12.1) Schematic-3D-Integrator (Administration)
Schematic Gateways TM-3570 AVEVA (12.1) Schematic Gateway for Smart Plant P&ID
Schematic TAGS
TM-3550 AVEVA Plant (12.1) Engineering TAG module (Basic)
TM-3551 AVEVA Plant (12.1) Engineering TAG module (Advanced)
TM-3552 AVEVA Plant (12.1) Engineering administration
AVEVA Instrumentation
TM-6101 AVEVA Instrumentation Project Administrator
TM-6102 AVEVA Instrumentation Engineer
TM-6103 AVEVA Instrumentation Wiring Manager
TM-6104 AVEVA Instrumentation Designer
AVEVA Electrical
TM-6501 AVEVA Electrical Project Administrator
TM-6502 AVEVA Electrical Engineer
TM-6503 AVEVA Electrical Wiring Manager
TM-6504 AVEVA Electrical Designer
INITIAL DESIGN
TM-2000 Initial Design Introduction & Project Set-up
TM-2001 Surface TM-2002 Compartment TM-2003 Lines (Design) TM-2004 Lines (Production) TM-2005 Hydrostatics TM-2006 Probabalistic Stability TM-2007 Hydrodymanics TM-2008 Surface Manager DISCIPLINE
TM-2101 Hull Structural Design
TM-2102 Hull Detailed Design - Planar Hull Modelling
TM-2103 Hull Detailed Design - Curved Hull Modelling (Combined)
TM-2106 Hull Detailed Design - Hull Production Information
TM-2107 Hull Detailed Design - Plate Nesting
TM-2109 Space Management
TM-2110 Common Reference Model
TM-2141 FEM
ADMINISTRATION TM-2122 Project Administration (Hull)
SPECIALIST TM-2130 Vitesse Basic / Data Extraction TM-2131 Vitesse Hull / Advanced
BASIC TM-2100 Marine Drafting
TM-2108 Assembly Planning & Hull Weld Planning
TM-2132 Migration
TM-2203 Review
TM-2204 Reporting
TM-2239 Clash Manager
TM-2262 Global
ADMINISTRATION TM-2120 System Administration (Basic)
TM-2121 System Administration (Advanced)
TM-2123 Marine Drafting Administration
TM-2254 Clash Manager Administration
SPECIALIST TM-2263 Programmable Macro Language (Basic)
TM-2264 Programmable Macro Language (Advanced)
TM-2268 .NET Custimisation
0. N/A
1. Very low knowledge
2. Low knowledge, but know whom to contact and where to look for info.
3. Some knowledge which can be built on. Questions can be answered and discussions around the program/function can be handled. Can demo with structured material.
4. Good knowledge, can handle support calls with confidence. Can deliver training.
5. Very high knowledge. Aware of the background of the program/functionality and can answer most questions without having to check documentation and/or consult developer. Can take active role in a workshop and benchmark
IA N A P P L E G A R T H Ö Z G U R K IZ IL O C A K M A C IE J Z A L E W S K I A L F J O N S S O N S T A N K E R N E N JA M E S P A G E T W A Y N E R O W L E S A N T H O N Y H O R R E L L S T E V E M O R T O N K E V IN B R O W N L IE N IC K G LY N N B R Y N T O O T E L L S T E P H E N B U R R O W S S H A S H A N K S H A R D A S O M A Y E H T O U R A N IA N D A V ID W R IG H T C H R IS T IN G L E G U S T A V O C U E R V O S E L C A N R O W L E S K E N N E T H IG B E H E N R Y U Y E M E J O H N B U C K A L E X A N D R E B E D IN D O A N -T R IN H P H A M T H I G E R T S T O C K F IS C H J O E L W E C H S E L E R J O E R G B U H R E N N IC O L A S R O U S S E A U Unintelligent Drawing Upgrade Guide Schematic Model Manager Schematic 3D Integrator A V E V A M a ri n e ( In it ia l D es ig n ) A V E V A M a ri n e ( H u ll) A V E V A M a ri n e (C o m m o n )
TM-0001 Training Setup
This manual is for AVEVA personnel only, to setup the Training Project for Customer training. Covers training project DB's for MDS, PDMS and related disciplines. PD Contact PD Product Manager PD Team Lead
IA N A P P L E G A R T H Ö Z G U R K IZ IL O C A K M A C IE J Z A L E W S K I A L F J O N S S O N S T A N K E R N E N JA M E S P A G E T W A Y N E R O W L E S A N T H O N Y H O R R E L L S T E V E M O R T O N K E V IN B R O W N L IE N IC K G LY N N B R Y N T O O T E L L S T E P H E N B U R R O W S S H A S H A N K S H A R D A S O M A Y E H T O U R A N IA N D A V ID W R IG H T C H R IS T IN G L E G U S T A V O C U E R V O S E L C A N R O W L E S K E N N E T H IG B E H E N R Y U Y E M E J O H N B U C K A L E X A N D R E B E D IN D O A N -T R IN H P H A M T H I G E R T S T O C K F IS C H J O E L W E C H S E L E R J O E R G B U H R E N N IC O L A S R O U S S E A U
BASIC TM-2201 AVEVA Outfitting Foundations TM-2202 Outfit Drawing Production (Basic)
DISCIPLINES
TM-2220 Pipework Modelling
TM-2221 Outfit Structural Modelling
TM-2222 Cable Tray
TM-2223 Heating, Ventilation & Air Conditioning Modelling
TM-2225 Cable Design
TM-2227 Room Design
TM-2228 Iso ADP (Cable Tray / HVAC)
TM-2229 Pipe Fabrication
ADVANCED
TM-2230 Outfit Drawing Production (Advanced)
TM-2231 Router
TM-2232 Spooler
TM-2234 Multi Discipline Supports
TM-2235 Piping Catalogues & Specifications
TM-2236 Cabling and Cable Tray Cats & Specs
TM-2237 Structural Catalogues & Specifications
TM-2238 Equipment Design (Advanced)
TM-2240 Room Design Catalogue and Specifications
TM-2241 AVEVA Outfitting Supports
TM-2242 Equipment Seat Application
ADMINISTRATION
TM-2252 Project Administration (Outfit)
TM-2253 Outfit Project Drawing Administration
TM-2255 Multi Discipline Supports Administration
TM-2256 AVEVA Outfitting Supports Administration
SPECIALIST TM-2261 Structural Design Templates
INTERFACES
TM-2270 Pipe Stress Interface (Admin)
TM-2271 Pipe Stress Interface (User) (Caesar II 5.1) Laser Model Interface
A V E V A P la n t
Training Setup TM-0001 Training Setup
BASIC TM-1000 AVEVA PDMS Hands-On Overview
TM-1001 AVEVA PDMS Foundations
TM-1002 Drawing Production (Basic)
TM-1003 Design Utilities
TM-1004 Reporting
DISCIPLINE TM-1100 Pipework Modelling
TM-1101 Structural Modelling
TM-1102 Cable Tray Modelling
TM-1103 Heating, Ventilation & Air Conditioning Modelling
TM-1104 Equipment Modelling
TM-1105 Electrical & Instrumentation Equipment Modelling
TM-1106 Cable Design
TM-1108 Building Applications
TM-1109 Walls and Floors Miodelling
ADVANCED TM-1200 Equipment Design Templates
TM-1202 Piping Catalogues & Specifications
TM-1203 Structural Catalogues & Specifications
TM-1204 Cabling and Cable Tray Cats & Specs
TM-1205 Structural Design Templates
TM-1206 Drawing Production (Advanced)
TM-1207 Pipe Router
TM-1208 Spooler
TM-1209 Area Based Automatic Drawing Production
TM-1210 Multi-Discipline Supports
TM-1212 HVAC - Cableway Isometric Automatic Drawing Production
TM-1220 Model Object Manager
TM-1221 Clash Manager
ADMINISTRATION TM-1300 System Administration (Basic)
TM-1301 System Administration (Advanced)
TM-1302 Project Drawing Administration
TM-1303 Project Design General Administration
TM-1304 Multi-Discipline Supports Administration
TM-1305 Area Based Automatic Drawing Production (Administration)
TM-1307 Building Applications Administration
TM-1308 Lexicon
TM-1309 Piping Design Administration
TM-1310 HVAC Design Administration
TM-1321 Clash Manager Administration
SPECIALIST TM-1400 Administering Global Projects
TM-1401 PML Macros & Functions
TM-1402 PML Form Design
TM-1403 PML Applied
TM-1406 .NET Customisation
INTERFACE TM-1500 OpenSteel
TM-1501 Pipe Stress Interface (Admin)
TM-1503 Pipe Stress Interface (User)
TM-1504 AVEVA Laser Modeller (User)
TM-1505 AVEVA Laser Modeller (Admin)
A V E V A M a ri n e (O u tf it ti n g )
TM-0001 Training Setup
This manual is for AVEVA personnel only, to setup the Training Project for Customer training. Covers training project DB's for MDS, PDMS and related disciplines. PD Contact PD Product Manager PD Team Lead
IA N A P P L E G A R T H Ö Z G U R K IZ IL O C A K M A C IE J Z A L E W S K I A L F J O N S S O N S T A N K E R N E N JA M E S P A G E T W A Y N E R O W L E S A N T H O N Y H O R R E L L S T E V E M O R T O N K E V IN B R O W N L IE N IC K G LY N N B R Y N T O O T E L L S T E P H E N B U R R O W S S H A S H A N K S H A R D A S O M A Y E H T O U R A N IA N D A V ID W R IG H T C H R IS T IN G L E G U S T A V O C U E R V O S E L C A N R O W L E S K E N N E T H IG B E H E N R Y U Y E M E J O H N B U C K A L E X A N D R E B E D IN D O A N -T R IN H P H A M T H I G E R T S T O C K F IS C H J O E L W E C H S E L E R J O E R G B U H R E N N IC O L A S R O U S S E A U A V E V A E ve ry th in g 3 D
Training Setup TM-1800 AVEVA Everything3D™ Training Setup
Basics
TM-1801 AVEVA Everything3D™ Foundations
TM-1802 AVEVA Everything3D™ Model Utilities
TM-1803 AVEVA Everything3D™ Reporting
Modelling
TM-1810 AVEVA Everything3D™ Pipework Modelling
TM-1811 AVEVA Everything3D™ Equipment Modelling
TM-1812 AVEVA Everything3D™ Structural Modelling
TM-1813 AVEVA Everything3D™ Stairs, Ladders & Handrail Modelling
TM-1814 AVEVA Everything3D™ Walls & Floors Modelling
TM-1815 AVEVA Everything3D™ Cableway & Cable Modelling
TM-1816 AVEVA Everything3D™ Cable Tray Modelling
TM-1817 AVEVA Everything3D™ Heating, Ventilation & Air Conditioning Modelling
TM-1818 AVEVA Everything3D™ Multi-Discipline Supports
TM-1819 AVEVA Everything3D™ Electrical & Instrumentation Equipment Modelling
TM-1821 AVEVA Everything3D™ Using Laser Models
Drawing Production
TM-1830 AVEVA Everything3D™ Draw
TM-1831 AVEVA Everything3D™ Automatic Drawing Production
TM-1832 AVEVA Everything3D™ Area Based Automatic Drawing Production
TM-1840 AVEVA Catalogue Piping Catalogues & Specifications
TM-1841 AVEVA Catalogue Structural Catalogues & Specifications
TM-1842 AVEVA Catalogue Cable Catalogues & Specifications
Tools
TM-1850 AVEVA Everything3D™ Pipe Router
TM-1851 AVEVA Everything3D™ Spooler
TM-1852 AVEVA Everything3D™ Equipment Design Templates
TM-1853 AVEVA Everything3D™ Structural Design Templates
TM-1854 AVEVA Everything3D™ Clash Manager
TM-1855 AVEVA Everything3D™ Schematics 3D Integrator
Administration
TM-1860 AVEVA Administration System Administration (Basic)
TM-1861 AVEVA Administration System Administration (Advanced)
TM-1862 AVEVA Administration Lexicon
TM-1863 AVEVA Global Administering Global Projects
TM-1864 AVEVA Everything3D™ Stairs, Ladders & Handrail Administration
TM-1865 AVEVA Everything3D™ Multi-Discipline Supports Administration
TM-1867 AVEVA Everything3D™ Project Modelling General Administration
TM-1868 AVEVA Everything3D™ Pipe Modelling Administration
TM-1869 AVEVA Everything3D™ HVAC Modelling Administration
TM-1870 AVEVA Everything3D™ Draw Administration
TM-1871 AVEVA Everything3D™ Automatic Drawing Production Administration
TM-1872 AVEVA Everything3D™ Area Based Automatic Drawing Production Administration
TM-1873 AVEVA Everything3D™ Isodraft Administration
TM-1874 AVEVA Everything3D™ Clash Manager Administration
TM-1875 AVEVA Everything3D™ Schematics 3D Integrator Administration
Programming
TM-1880 AVEVA Everything3D™ PML Macros & Functions
TM-1881 AVEVA Everything3D™ PML Form Design
TM-1882 AVEVA Everything3D™ PML Applied
TM-1883 AVEVA Everything3D™ .NET Customisation
SDNF TM-1890 AVEVA Everything3D™ SDNF Interface
Catalogues & Specifications
AVEVA Plant (12 Series) Training Modules and Guides
ISSUEDModule ID Module Training Guide Content Summary Pre-requisites Target Personnel
TM-0001 Training Setup 0 NONE NONE
TM-1000 2 None M2
TM-1001 AVEVA PDMS Foundations 3 All Designers and Engineers M3, M4
TM-1002 Drawing Production (Basic) 2 AVEVA PDMS Foundations All Designers and Engineers M10
TM-1003 Design Utilities ½ AVEVA PDMS Foundations All Designers and Engineers M11, M12
TM-1100 Pipework Modelling 2 AVEVA PDMS Foundations Piping Designers M5, M11, M13
TM-1101 Structural Modelling (Basic) 2 AVEVA PDMS Foundations Structural Designers M6
TM-1102 Cable Tray Modelling 2 AVEVA PDMS Foundations E&I Designers M9
TM-1103 2 AVEVA PDMS Foundations HVAC Designers M8
TM-1104
TM-1105 Cableway & Cabling Design 2 AVEVA PDMS Foundations E&I Designers N/A
TM-1106 E & I Modelling 1 AVEVA PDMS Foundations E&I Designers
TM-1107 AVEVA Diagrams (Pipe) Contact John Reynard for further details
TM-1108 AVEVA Diagram (HVAC) Contact John Reynard for further details
TM-1109 2 AVEVA PDMS Foundations Structural Designers N/A
TM-1110 2 AVEVA PDMS Foundations Structural Designers N/A
TM-1111 Room Design (Not available in Plant) N/A
TM-1112 ASL HOLD N/A
Module and Training Guide
Title Duration (Days) Replacing Existing Training Modules
This manual is for AVEVA personnel only, to setup the Training Project for Customer training. Covers training
project DB's for MDS, PDMS and related disciplines. For AVEVA Personnel only, when
conducting Training for Customers.
AVEVA PDMS Hands-On Overview
Hand on PDMS Appreciation, covering from PDMS Database Structure, worked examples of various Design disciplines, simple Catalogue creatin, through to Drawing Production
Management Project Leaders AVEVA PDMS Fundamentals, User Interface Basics,
Displaying Model Elements, Working with 3D Views, General Utilities, Attributes, Positioning and Orientation, Introduction to Model Editor, Basic Equipment Modelling, Equipment Modelling Using Templates, Equipment Utilities, Volume Modelling
Knowledge of Windows XP, Keyboard Skills
Draft Hierarchy, View Creation, 3D View, Dimensioning, Labelling, 2D Draughting, Flat Section Planes
Clash Detection, Quick Reports, Reporter using templates, Surface treatment reports, Mass properties & CofG, Status Control, Representation rules (Design) Pipework Modelling, Pipe Routing, Replacing
Components, Data Consistency Checker, Clash Detection, Hole Management, Isometric Production, Sloping/Falling Pipelines, Alternative Posistioning forms, Pipe Assemblies, Pipe Splitting, Pipe Editing (re-bore/re-spec), Pipe Fabrication Machine. Production Checks, Flange enhancements
Setting-up the Database hierarchy for Structures, Beams & Columns, Modifying Structural Sections, Beam & Column Utilities, Regular Structures, Section Fittings and Joints, Panels & Plates, Negative Extrusions and Panel Fittings, Material assignment (Weights, CofG calculations) Cable Tray Modelling Concepts, Creation of Cable Tray branches, In-line Components, Model Editor for Cable Tray, Reporting for Cable Tray, Data consistency checks Heating, Ventilation & Air
Conditioning Modelling
HVAC Design Features, Getting Started, Learning about the PDMS HVAC database hierarchy, Routing a sequence of HVAC components, Adding to the HVAC model, HVAC Splitting, Completing the Design, Hole Management, Checking and Outputting Design Data, HVAC Systems, HVAC Spooling, HVAC Sketches
Cableway Modelling, Route Attachment Points, Cableway Route node Points, Cableway Qucik Router, Splitting Cableways.
Cable Tray Material, Cableway / Tray Penetrations Cable routing, Cable Import, Cable Data Utility Modelling and Managing Electrical and Instrument items. Non parametric templates creation, modification, linking 3D objects to documents
Nuclear Concrete Design PDMS 11.6 Version
Data Structure in Nuclear Concrete Design, Floor and Wall Hierarchy and Elements creation, Create / Modify Floor and Walls. Use contour editior for points modifications, Creation / Modification of Beams, Colums, Ladders, Concrete Stairs, Steel Stairs, Spiral Stairs Nuclear Room Manager
PDMS 11.6 Version
Overview of Nuclear Room Manager, Room Volume definition and creation, Room inventory, Utilities, eg Flood Water sumulation, Paint Area calculations, etc
TM-1113 Nuclear Application 4 Structural Designers N/A Data structure and hierarchy. Create/modify beams,
columns, walls, floors, sub-components, handrail, stairs, and ladders. Create/modify room volumes, flooding and inventory reports. Create/modify quantity reports.
Structural modelling (basic) or an understanding of the Walls & Floors
TM-1114 Nuclear Application Admin ½ Administrators N/A
TM-1200 Equipment Design (Advanced) 2 Any Discipline Modelling Course M19
TM-1201 Structural Modelling (Advanced) 2 Structural Modelling (Basic) Advanced Structural Designers M18
TM-1202 5 Pipework Modelling M22
TM-1203 5 Structural Modelling (Advanced) M23
TM-1204 TBC Electrical & Instruments Modelling N/A
TM-1205 Structural Design Templates 5 Structural Cats & Specs Advanced Structural Designers M32
TM-1206 Drawing Production (Advanced) 2 Drawing Production (Basic) All Designers and Engineers M20
TM-1207 Pipe Router 1 Pipework Modelling Piping Designers M16
TM-1208 Pipe Spooler 1 Pipework Modelling Piping Designers M17
TM-1209 ½ Drawing Production (Basic) All Designers and Engineers N/A
TM-1210 Multi-Discipline Supports 2 M15
TM-1211 P & ID Integrator Contact John Reynard for further details
TM-1220 Model Object Manager 1 All Designers and Engineers M40
TM-1221 Clash Manager 1 AVEVA PDMS Foundations All Designers and Engineers M41
TM-1222 Deliverable Manager 1 M42
TM-1223 Connectivity Manager 1 M43
Product installation, configuration and set up
requirements. Parameter files, catalogue and specification requirements (this does not include detailed Cats & Specs for Nuclear items).
Basic understanding of PDMS system administration and Nuclear Applications
utilities. Equipment Templates (Parametrised &
Non-parameterised), Selection Tables, Equipment Associtaions, Hole Management for Equipment.
Advanced Pipework or E&I Designers
3D Aid Constructs & Working Planes, Curved Profiles, Hole Management
Piping Catalogues & Specifications
What Paragon Does, The Catalogue Database Structure, Paragon - General Application, Component Creation, Constructing Pointsets, Creation of Geometry Sets, Creating Text Elements, Component Part Families, Coding Systems, Connection Compatibility Tables, Pipe Speifications, Component Insulation and Specification, Design Parameters, Nozzle Specifications, Bolting, Datasets, Attachment points, Properties, Spooling, Component Item Codes, Catalogue Database Consistency, Administration,
Designated Cats & Specs personnel with Piping Design background.
Structural Catalogues & Specifications
General Pinciples, Structural Profiles, Design Parameters and Non-Prismatic Profiles, Section Fittings, Panel Fittings, Joints
Designated Cats & Specs personnel with Structural Design background.
Cabling Catalogue and
Specifications 12.0.SP2TBC at Designated Cats & Specs personnel with E & I background.
Template Hierarchy, Basic Referencing, Property Relationships, Initial Modelling, Capturing the Elements, Adding Properties, Data Ranges & Valid Values, Parametrisation, Design Points, Local Names, Repeat Elements
3D View, Autotagging, Change Highlighting, General ADP, Symbolic Representation
Basic Routing, Positioning and Locking Components, Creating and Uaing Routing Points, Routing Planes, Creating and Using Pipe Rack, Pipe Packing, Routing Rules
Controlling Spooler, Preparation for Spooler, Creating a Spool Drawing, Spooling Piping Network, Advanced Spooler Features, Outputting Spool Drawings Area Based Automatic Drawing
Production (User)
Basic Components of an ABA Drawing, Remplates, Areas, etc
Creating AB-ADP Drawing, Processing options, Regenerate process, AB-ADP defaults, View Log files, Setting Drawing names.
MDS Basic Concepts of a Support, Entering the MDS Application, MDS Defaults, Multi Discipline Support, Modification of a Support, Deleting a Support, Locking a Support, Cable Rack Support, HVAC Support, Creation of a General Support, Trunnion Support, Fixed Hanger, Variable Hanger, Fixed/Variable Hanger Creation Modes, Special Supports, Support Groups, Lighting Supports, Vessel Supports, Branch Reinforcement, Preliminary Supports, Copying a Support, Modifying a Support Name, MDS Wizard, MDS Helath Check Utility, MDS Reports, Miscellaneous Utilities, MDS Drawing Production, MDS Manuals & Help
Pipework Modelling or HVAC Modelling
or E&I Modelling Piping Designers, HVAC Designers and E&I Designers
MOM concepts,Controlling 2D & 3D objects, Building
contolled Pipes, Equipments and Instruments AVEVA PDMS Foundations, Pipework Modelling and E&I Modelling.
Clash Manager concepts,Creating & Executing Clash Sets, Approval of Clashes, Clash Groups, Clash Reports Controlling deliverables such as isometrics, equipment drawings and pipe support details depending upon attribute values.Produce and detail the drawings,Adding notes and stickers to Drawings
Model Object Manager, AVEVA PDMS Foundations, Pipework and Equipment Modelling.
Piping and Equipment Designers and Engineers
P&ID to 3D graphical comparison of equipment, nozzle, line and piping/instrument component data between AVEVA PE P&IDs and PDMS models.Connectivity reports,Building of Pipe, Equipment and inline components
AVEVA PDMS Foundations, Pipework
TM-1230 Final Designer Not Available for PDMS12.SP2.1 Yet 2 Drawing Production Personnel M44
TM-1300 System Administration (Basic) 2 Any Discipline Course System Adminstrators M25, M35
TM-1301 2 Basic System Administration System Adminstrators M26
TM-1302 Project Drawing Administration 3 Drawing Production (Basic) M27, M28, M29
TM-1303 Project Design Administration 2 Any Discipline Course N/A
TM-1304 1 Multi-Discipline Supports M31
TM-1305 1 N/A
TM-1320 1 System Adminstrators M40A
TM-1321 Clash Manager Administration 1 AVEVA PDMS Foundations System Adminstrators M41A
TM-1322 Installation and Configuration of Deliverable Manager 1 System Adminstrators M42A
TM-1323 1 Connectivity Manager System Adminstrators M43A
TM-1324 AVEVA Schematics 3D Integrator Contact John Reynard for further details 1 Connectivity Manager System Adminstrators M43A
TM-1325 AVEVA Schematics (Admin)
TM-1400 Global 1 System Administration System Adminstrators M34
TM-1401 TBC 5 Any Discipline course Advanced Designers M33
Drawing Production and good AutoCAD knowledge
Project Access, Creating a New Project, Teams and Users, Password security, Creating Databases, Foreign Databases, MDBs,Testing AVEVA Plant Access, Reference Between Databases, NT Authentication, Sharing Projects and Files, Multiwrite Databases, Project Administration, Project Setup Excel Import, Environment Variables, Data Integrity Checking, Reconfigure, Backing Up Data
System Administration (Advanced)
Extract Databases, Lexicon, Creating UDA's and UDET's, Data Access Control, PML Encryption, IPR Database Encryption
Draft Administration, IsoDraft Administration and ADP
Administration Project Administrators and System Administrators
HVAC Administration, ASL Administration, Cable Administration (Future), Systems, Assemblies, Association Requirements, Hole Management Requirements, Pipe Assemblies
Multi-Discipline Supports Administration
MDS Projects and Databases, Project Catalogue Requirements and minimum DAC, Configuration Checklist, Accessing NDS Administration Form and Menus, MDS Admin Form, MDS Ancillary Defaults Form, MDS Hanger Data Form, Hangers Design Templates, MDS Lighting Support Defaults, Structure Defaults Form, Framework Template Administration, MDS Trunnion Defaults Form, Trunnions, MDS Autonaming, MDS User Plots, Report Defaults, MDS Drawing production
Designated MDS Administration Personnel
Area Based Automatic Drawing Production (Administration)
Basic components of AB-ADP, Templates, Areas, etc. AB-ADP defaults, Creating classifications, areas, Auto Tag rules, Creating tasks, Setting up Templates, Creating Drawing registry areas, Applying to Keyplans, Building Tasks.
Area Based Automatic Drawing Production (User) and Programmable Macro Language (Basic)
Model Object Manager Administration
Creating of Database instance(Oracle), Installing & Configuration of Model Management,Creating UDA's in VPE and mapping it across to PDMS, Releasing items in VPE, Issuing items for 3D design.
Model Manager,AVEVA PDMS Foundations
Creating of Database instance(Oracle & SQL), Installing & Configuration of Clash Manager,Assingning of Clashes to Disciplines, Setting up of Clash Manager users, Setting up of automatic assignment rules.
Deliverable Manager Administration
Model Object Manager, AVEVA PDMS Foundations, Pipework and Equipment Modelling.
Connectivity Manager Administration
Creating of Database instance(Oracle), Installing & Configuration of Model Management, Exporting data from P&ID to VPE, Releasing items in VPE, Creating UDA's in VPE and mapping it across to PDMS,Issuing items for 3D Design and PCM
Concepts and Terminology, Setting Up a Global Project, Satellite Project Structure, Unscheduled Database Updates, Transaction Database Administration, Databases in a Global Project, Tseating AVEVA Plant Global Access in Design, Global Daemon Service, Extract Databases, Working with Extract Databases in a Global Project, Data Access Control in a Global Project, Managing Databases in a Global Project, Transaction Failures
Programmable Macro Language (Basic)
TM-1402 pml.net, creating applications, interaction with PDMS 5 Programmable Macro Language Application Personnel N/A
TM-1500 OpenSteel TBC 2 Structural Modelling Advanced Structural Designers M24
TM-1501 Pipe Stress Interface (Admin) 1 Pipework Modelling Pipe Stress Engineers M30
TM-1502 1 Pipework Modelling Pipe Stress Engineers M30
Vendor dependant 1 Any Discipline Course Advanced Designers M38
TM-1900 PDMS Foundations and Design Util
2 t o 3 d a ys PDMS11.6 Knowledge
TM-1901 Equipment Modelling Upgrade PDMS11.6 Knowledge
TM-1902 Pipework Modelling Upgrade PDMS11.6 Knowledge
TM-1903 Structural Modelling Upgrade PDMS11.6 Knowledge
TM-1904 Piping Cats & Specs Upgrade PDMS11.6 Knowledge
TM-1905 System Admin Upgrade PDMS11.6 Knowledge
TM-1906 Drawing Production Upgrade PDMS11.6 Knowledge
TM-1907 PML Upgrade Not Available for PDMS12.0.SP5 (Same as 12.0.SP4) PDMS11.6 Knowledge Programmable Macro Language
(Advanced)
Project Installation and configuration, Catalogue and Design UDA settings, PSI interface settings, Expressions, Restraint settings
Pipe Stress Interface (User) (Caesar II 5.1)
PSI Interface, Creation / Display of Stress Groups,, Rebuild Stress groups, Animation, Stress group nodes, attributes, Checking of Stress groups, PDMS to CAESAR II, Transfer and stressing network, Reports, CAESAR II to PDMS, Add Pipe Supports & Anchors.
Laser Model Interface (vendor specific)
User Interface changes, multi drawlists, 3D views, Design explorers, Plant Grid systems, Groups, search, Command line window, Surface Treatment, Mass properties, Status Control, Representation rules in Design
All Designers and Engineers All Support / Administrators
New equipment primitive creation forms, import equipmet tags, Design Templates, Volume Modelling, Equipment Associations, Hole Management, Selection tables
All Designers and Engineers All Support / Administrators Pipe Splitting, Re-spec and Re-bore, Pipe assemblies,
Pipe Fabrication Machine, Production checks, New Piping component attributes, Flange enhancements, Pipe penetrations, Hole Management
All Designers and Engineers All Support / Administrators Enhanced Mitring , Enhanced Split functionality, Profile
Filleting, Mass properties (Weights, CofG), Hole Management
All Designers and Engineers All Support / Administrators Combined Paragon, Specon, Propcon, New database
elements (Part families and Selection Tables), New interface, Gparts, Branch tables, Bolting, Flange offsets, Mitre / Pulled bends, Surface treatment
All Designers and Engineers All Support / Administrators Database evolution, System limits, project wizard, excel
import, PML publisher, IPR database protection, Password security, NT Authentication
All Designers and Engineers All Support / Administrators Unbundling of colours from pens, true type fomts,
improved printing, 2D symbology, project upgrading All Designers and EngineersAll Support / Administrators
All Designers and Engineers All Support / Administrators
AVEVA Marine (12 Series) Common Training Modules and Guides
Module Group Module ID Module and Training Guide Title Module Training Guide Content Duration (Days) Pre-requisites Target Personnel Comments Module Upgrade Content
B A S IC TM-2100 Marine Drafting 2 0.5 TM-2108 1 None 0.5
TM-2132 Migration System Administrators N/A
TM-2203 Review N/A N/A
TM-2204 Reporting 2 AVEVA Hull / Outfitting N/A
TM-2239 Clash Manager Any Discipline Course N/A
TM-2262 Global 2 System Administrators N/A
A D M IN IS T R A T IO N
TM-2120 System Administration (Basic) 2 None System Administrators N/A
TM-2121 System Administration (Advanced) 2 System Administration (Basic) System Administrators N/A
TM-2123 Marine Drafting Administration 2 Marine Drafting Draft Administration
TM-2254 Clash Manager Administration TBC Clash Manager System Adminstrators M41A N/A TBC
Upgrade Training Duration (Days)
Introduction to AVEVA Marine Hull Concept,
overview of user interface and basic functionality Knowledge of Windows XP, Keyboard Skills All Designers and Engineers Intended as an introduction and foundation for All New Users before taking other courses.
Assembly Planning & Hull Weld
Planning All Assembly Planning & Weld Planning Functionality
Steelwork Designers Outfit Designers Planning Engineer
Project Migration fromTribon M3 series to AVEVA
Marine 12.1 System Administration, basic and Advanced
Knowledge of Windows XP,
Keyboard Skills All Designers and Engineers Documentation supplied with Review is adequate for Training
All Designers and Engineers
Concepts and Terminology, Setting Up a Global Project, Satellite Project Structure, Unscheduled Database Updates, Transaction Database Administration, Databases in a Global Project, Testing AVEVA Marine Global Access in Design, Global Daemon Service, Extract Databases, Working with Extract Databases in a Global Project, Data Access Control in a Global Project, Managing Databases in a Global Project, Transaction Failures
System Administration, basic and Advanced
System Set-up, Project Set-up (including outfit), Common System Tasks, DACS, Lexicon
Extract Databases, Data Access Control, PML encryption, IPR Data Base Encrption.
AVEVA Bocad Training Modules and Guides
ISSUEDModule ID Module Training Guide Content Summary Pre-requisites Target Personnel
TM-7001 AVEVA Bocad Basics 1 5 None Structural detailers and engineers
TM-7002 AVEVA Bocad Basics 2 (Steel) 5 TM-7001 Structural detailers and engineers
TM-7003 AVEVA Bocad NC 1 None Structural detailers
TM-7101 AVEVA Bocad Basics 2 None
TM-7102 AVEVA Bocad Deliverables 1 TM-7201 or TM-7301 or TM-7401 Structural detailers and engineers
TM-7103 AVEVA Bocad Advanced Utilities 2 TM-7101 and TM-7102 Structural detailers and engineers
TM-7104 AVEVA Bocad Customisation Letterboxes, Bills of Material, Bolts, Profiles, BoView 1 TM-7102 Structural detailers and engineers
TM-7200 Evalution (Onshore) 3 None
TM-7201 Detailing (Onshore) 2 TM-7101 Structural detailers and engineers
TM-7202 Specialisation (Onshore) Basics in: Stairs&Rails, Cladding, Boedit 2 TM-7103 Structural detailers and engineers
Module and Training Guide
Title Duration (Days) Replacing Existing Training Modules
Understand basic concepts of AVEVA Bocad. Setup new projects. Understand the grid concept of AVEVA Bocad. Use and create different types of views. Understand and use different point types in the design process. Create and edit member within the model in different ways. Create and edit outline plates. Create welded and bolted connections.
Create advanced member types such as curved members and flashings. Understand and use advanced construction concepts such as copy and mirror, detailing members with help of the detailing box, sharing construction elements between projects via libraries. Work with pre-defined steel construction connections. Understand and use advanced functions of AVEVA Bocad, especially the marking, parts lists and the drawing production.
Understand general handling concepts of AVEVA Bocad NC. Create common editing processes for parts within AVEVA Bocad NC.
AVEVA Bocad Fundamentals, User Interface Basics, General Utilities, Create objects, Modify objects, Create connections, Move-, Copy-, Mirror objects, exercises
Intended as an introduction and foundation for All New Users before taking other courses.
Marking, Automatic drawings, Drawing lists, Nested drawings, Bills of material, Interfaces, BoView
Advanced marking, Marking status, Revision Nr, Revision list, update drawing, Automatic nesting, Special profiles, shared work, Interfaces
Understand basic concepts of AVEVA Bocad, Import a steel structure from Everything3D, Complete this model, Export the steel structure to Everything3D
Especially for PDMS and Everything3D users to get an overview of the product but also for any user who wants to discover Bocad-3D Creation of joints - interactive/ by using macros,
Advanced member/connection, Checking tools, 3D Library, Exercises
