NAME OF THE PRODUCT Headlight renovator polymer 600 ml CODE GHS07 Exclamation Mark H302 4: Harmful if swallowed.

Full text

(1)

BOSSAUTO INNOVA, S.A.

Pol. Ind. Valldoriolf C/ Thomas Edison 16, 08430 La Roca del Vallés. Barcelona t: +34 938 604 923 / f: +34 938 712 336 info@bossauto.com / www.bossauto.com

SAFETY DATA SHEET

1. IDENTIFICATION OF THE SUBSTANCE

NAME OF THE PRODUCT Headlight renovator polymer 600 ml CODE 100907

2. HAZARDS IDENTIFICATION

2.1 Classification of the substance or mixture:

Regulation (EC) No 1272/2008.

H314 Skin. Irrit. Skin corrosion (Category 1) H317 Skin. Sens Skin sensitization (Category 1) H318 Eye Irrit. Serious eye damage (Category 1) H351 Carc. Carcinogenicity (Category 2

H360 Repr. Reproductive toxicity (Category 1B), Label elements

Acute. Tox.

GHS07 – Exclamation Mark H302 4: Harmful if swallowed.

Skin. Corr

GHS05 - Corrosion

1B H314: Causes severe skin burns and serious eye damage.

Aspiration hazard

GHS08 – Health hazard

H334: May cause allergy or asthma symptoms and difficulty breathing by inhalation

Classification method:

The classification is in accordance with Regulation (EC) No. 1272/2008, but was completed with data from the literature, as well as information from suppliers of raw materials and

manufacturers.

Additional information

In case of emergency call: 0034 91 562 04 20 2.2 Label elements

Regulation (CE) N. º 1272/2008

The product is classified and labelled according to the CLP regulation.

(2)

BOSSAUTO INNOVA, S.A.

Pol. Ind. Valldoriolf C/ Thomas Edison 16, 08430 La Roca del Vallés. Barcelona t: +34 938 604 923 / f: +34 938 712 336 info@bossauto.com / www.bossauto.com

Hazard pictograms

GHS07 GHS05 GHS08

Signal word: Danger Hazard statement:

H314 Causes severe skin burns and serious eye damage.

H315 Causes skin irritation.

H317 May cause an allergic skin reaction.

H319 Causes serious eye irritation.

H336 May cause drowsiness or dizziness H351 Suspected of causing cancer.

H360 May damage fertility or the unborn child.

H226 Flammable liquid and vapour.

H312 Harmful in contact with skin.

H301 Toxic if swallowed.

H311 Toxic in contact with skin.

Precautionary statements:

P201 Obtain special instructions before use

P260 Do not breathing dust/fume/gas/vapours/spray P264 Wash thoroughly after handling.

P280 Wear protective gloves / protective clothing / eye protection / face protection.

P301+P310 IF SWALLOWED: Immediately call a POISON CENTER or a doctor/physician.

P331 Do NOT induce vomiting

P303+P361 +P353 IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower

P332+P313 lf skin irritation occurs: Get medical advice/attention P362 Take off contaminated clothing and wash before reuse

P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do - continue rinsing

P308+P313 IF exposed or concerned: Get medical advice/attention

P370+P378 In case of fire: Use dry sand, water spray, chemical foam, dry chemical, CO2 for extinction.

Storage Precautionary statements

P405 Store locked up

Disposal Precautionary statements

P501 Disposal of contents and container to an approved waste disposal plant.

2.3 Other hazards

None.

(3)

BOSSAUTO INNOVA, S.A.

Pol. Ind. Valldoriolf C/ Thomas Edison 16, 08430 La Roca del Vallés. Barcelona t: +34 938 604 923 / f: +34 938 712 336 info@bossauto.com / www.bossauto.com

3. COMPOSITION/INFORMATION ON INGREDIENTS 3.1. Chemical characterisation: Mixtures

Description: Mixture of substances listed below with non-hazardous additions.

Identification CAS: 75-09-2

EINECS:200-838-9 Dichloromethane Carc. 2 H351

64%

CAS: 68-12-2

EINECS: 200-679-5 N, N-dimethylfor mamide Acute Tox. 4 H312

Eye lrrit. 2 H319 Acute Tox. 4 H332, Repr. 1B H360O

16%

CAS: 203-629-0

EINECS: 108-91-8 Cyclohexylamine Flam. Liq. 3 H226 Acute Tox. 4 H302

Acute Tox. 4 H312 Skin Corr. 1B H314 Repr. 2 H361f

9%

CAS:64-19-7

EINECS: 200-580-7 Acetic acid

Flam. Liq. 3 H226 Skin Corr. 1A H314

4%

CAS: 25068-38-6

EINECS: 500-033-5 Epoxy resin

Skin lrrit. 2 H315 Eye lrrit. 2 H319 Skin Sens. 1 H317, Aquatic Chronic 2 H411

4%

CAS: 64-17-5

EINECS: 200-578-6 Ethanol

Flam. Liq. 2 H225

2%

CAS: 141-78-6

EINECS:205-500-4 Ethyl acetate

Flam. Liq. 2 H225 Eye lrrit. 2 H319 STOT SE 3 H336

1%

(4)

BOSSAUTO INNOVA, S.A.

Pol. Ind. Valldoriolf C/ Thomas Edison 16, 08430 La Roca del Vallés. Barcelona t: +34 938 604 923 / f: +34 938 712 336 info@bossauto.com / www.bossauto.com

4. FIRST AID MEASURES

4.1 Description of first aid measures

Symptoms can occur after exposure, so in case of direct exposure to the product, in case of doubt or when symptoms of discomfort persist, seek medical attention. Never give anything by mouth to people who are unconscious. Rescuers should pay attention to their own protection and the use of personal protection items. Wear protective gloves when first aid is provided.

After inhalation:

Move the victim to fresh air. If breathing is irregular or stops, get medical attention.

After ingestion:

Do not induce vomiting; Go immediately to the doctor and show him the label. Keep the patient at rest. It is not considered to represent a significant risk of ingestion under the expected conditions of normal use.

After skin contact:

Remove contaminated clothing. Wash off with soap and plenty of water. lf irritation occurs and persists, contact a doctor.

After eye contact:

If applicable and possible, remove contact lenses. Rinse the eyes for several minutes with running water for at least 20 minutes, keeping the eyelids separate, until the irritation stops. If symptoms persist, consult a medical specialist.

4.2 Most important symptoms and effects, both acute and delayed No further relevant information available.

4.3 Indication of any immediate medical attention and special treatment needed No further relevant information available.

5. FIREFIGHTING MEASURES 5.1 Extinguishing media:

Suitable Extinguishing Media:

Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.

5.2 Unsuitable extinguishing media:

Do not use strongly water fog. As it may spread the fire.

5.3 Special hazards arising from the substance or mixture:

Carbon oxides, Nitrogen oxides etc.

Advice for firefighters:

Stand upwind. Move material away from fire for safe. Use water mist to cool down unopened

container involved in fire. Firefighters should wear self-contained breathing apparatus and full

fire-fighting gear if necessary. Do not let contaminated water enter drains and water source.

(5)

BOSSAUTO INNOVA, S.A.

Pol. Ind. Valldoriolf C/ Thomas Edison 16, 08430 La Roca del Vallés. Barcelona t: +34 938 604 923 / f: +34 938 712 336 info@bossauto.com / www.bossauto.com

6. ACCIDENTAL RELEASE MEASURES

6.1 Personal precautions, protective equipment and emergency procedures:

Wear protective equipment. Keep people without protection away. For large spills, block with a container. Workers must wear protective clothing in the shed area. Do not rinse with water to prevent spreading of the spill area.

6.2 Environmental precautions:

Do not allow to enter sewage / surface water / soil.

6.3 Methods and material for containment and cleaning up:

For small spills, absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust) and place into suitable container. Dispose of contaminated material as waste according to section 13.

For large spills, dike spilled material or otherwise contain material to ensure runoff does not reach a waterway. Gather the spilled product and keep in suitable, closed containers for recycle or disposal (see section 13).

6.4 Reference to other sections:

See Section 7 for information on safe handling.

See Section 8 for information on personal protection equipment.

See Section 13 for disposal information.

7. HANDLING AND STORAGE 7.1 Precautions for safe handling

Use in well-ventilated area. Keep away from heat/sparks/open flames/hot surfaces - No smoking. Avoid contact with skin and eyes. Avoid breathing vapor. Wash thoroughly after handling. Remove contaminated clothing and wash before reuse.

7.2 Conditions for safe storage, including any incompatibilities Storage:

Store in the original closed container, hermetically closed in a cool and ventilated place. Keep out of direct sunlight.

8. EXPOSURE CONTROLS/PERSONAL PROTECTION

Additional information about design of technical facilities: No further data; see item 7.

8.1 Exposure limits

Identification Environmental values limits Methylene chloride

CAS: 75-09-2 ACGIH 50ppm --

Ethyl acetate CAS: 141-78-6

OSHA PEL 400ppm 1400 mg/cm

3

.

(6)

BOSSAUTO INNOVA, S.A.

Pol. Ind. Valldoriolf C/ Thomas Edison 16, 08430 La Roca del Vallés. Barcelona t: +34 938 604 923 / f: +34 938 712 336 info@bossauto.com / www.bossauto.com

8.2 Engineering Controls

General industrial hygiene practice. Ensure enough ventilation to maintain hazardous vapor below the exposure limit. Provide safety shower and eye wash fountain.

Respiratory protection Wear a protective mask.

Eyes and face protection

Protective eyeglasses. Clean and disinfect the glasses daily according to the manufacturer's instructions.

Protection of hands

The choice of the right glove does not only depend on the material, but also on other brands of quality and varies from one manufacturer to another. As the product is a mixture of several substances, the resistance of the glove material cannot be calculated in advance and therefore must be checked before application. Protective gloves against chemical products (EN374). The glove material must be waterproof and resistant to the product / substance / preparation.

Penetration time of the glove material must be informed about the exact validity of its manufacturer's gloves and respect that, taking into account environmental variables such as ambient temperature. Use the correct technique to remove the gloves without touching their outer surface. Gloves should be discarded immediately if they show signs of degradation

Body protection

Wear full protective clothing

Additional information Thermal protection

Not applicable. Product is handled at room temperature.

(7)

BOSSAUTO INNOVA, S.A.

Pol. Ind. Valldoriolf C/ Thomas Edison 16, 08430 La Roca del Vallés. Barcelona t: +34 938 604 923 / f: +34 938 712 336 info@bossauto.com / www.bossauto.com

9. PHYSICAL AND CHEMICAL PROPERTIES

9.1 Information on basic physical and chemical properties:

General information Physical state

Physical state at 20ºC Liquid

Appearance N / A

Colour Light blue

Odour Irritating odour

Volatility

Boiling temperature at atmospheric pressure N / A

Vapor pressure at 20 ° C N / A

Vapor pressure at 50 ° C N / A

Evaporation rate at 20 ° C N / A

Product characteristics

Density at 20ºC N / A

Relative density at 20ºC N / A

Dynamic viscosity at 20ºC N / A

Kinematic viscosity at 20ºC N / A

Kinematic viscosity at 40 ° C N / A

Concentration N / A

pH N / A

Vapor density at 20 ° C N / A

Partition coefficient n-octane / water at 20 ° C N / A

Solubility in water at 20ºC N / A

Solubility property Partly soluble in water

Decomposition temperature N / A

Flammability

Flash temperature 575 ºC

Autoignition temperature 579 ºC

Lower flammability limit N / A

Upper flammability limit N / A

Surface tension at 20ºC N / A

Refractive index N / A

9.2. Other information

No further relevant information available.

10. STABILITY AND REACTIVITY 10.1 Reactivity:

No further relevant information available.

10.2 Chemical stability:

Stable product.

10.3 Possibility of hazardous reactions:

None hazardous reactions known.

(8)

BOSSAUTO INNOVA, S.A.

Pol. Ind. Valldoriolf C/ Thomas Edison 16, 08430 La Roca del Vallés. Barcelona t: +34 938 604 923 / f: +34 938 712 336 info@bossauto.com / www.bossauto.com

10.4 Conditions to avoid:

Keep away from open flames:

The hot surfaces.

The sources of ignition.

10.5. Incompatible materials:

Oxidizing agents, oxidizing agents, peroxides.

Incompatibility (Materials to Avoid):

Strong oxidizing materials, strong acid, strong base.

10.6 Hazardous decomposition products:

There can be decomposition into carbon monoxide, carbon dioxide and dangerous gases.

11. TOXICOLOGICAL INFORMATION 11.1 Information on toxicological effects:

Acute toxicity:

Styrene

CAS:100-42-5 Oral Dermal Inhalation

LD50 LD50 LC50 (4h)

> 2000 mg/kg

> 2000 mg/kg 11,8 mg/l (rat) Ingestion

Not an expected route of exposure.

May be harmful if swallowed.

Skin Corrosion/irritation:

Causes skin burn Inhalation

Avoid inhaling vapor. May be harmful if inhaling large amount of vapor. May cause respiratory irritation. May cause drowsiness or dizziness.

Acute toxicity

Based on available data, the classification criteria are not met.

Corrosion/irritation:

Based on available data, the classification criteria are not met.

Eye and skin contact:

▪ Skin contact May cause skin burn.

Eye contact

May cause serious eye damage if liquid in-eye.

CMR Effects (carcinogenicity, mutagenicity y reproductive toxicity):

Carcinogenicity

Suspected of causing cancer:

Component IARC NTP

Dichloromethane CAS: 75-09-2

2A - Group 2A: Probably carcinogenic to humans

Not listed

Germ cell Mutagenicity:

Based on available data, the classification criteria are not met.

(9)

BOSSAUTO INNOVA, S.A.

Pol. Ind. Valldoriolf C/ Thomas Edison 16, 08430 La Roca del Vallés. Barcelona t: +34 938 604 923 / f: +34 938 712 336 info@bossauto.com / www.bossauto.com

Reproductive toxicity:

May damage fertility or the unborn child.

Sensitization effects:

Respiratory:

May cause an allergic skin reaction.

Dermal:

May cause an allergic skin reaction.

Specific Target Organ Toxicity - Single Exposure (Globally Harmonized System):

Based on available data, the classification criteria are not met.

Specific Target Organ Toxicity - Repeated Exposure (Globally Harmonized System):

Based on available data, the classification criteria are not met.

Aspiration hazard

Based on available data, the classification criteria are not met.

12. ECOLOGICAL INFORMATION 12.1 Ecotoxicity:

Identification Toxicity Type

Dichloromethane CAS:75-09-02 CE:

LC50 193mg/L (96h) Flow-through test Pimephales promelas (fathead minnow)

Fish

LC50 27mg/L (48h) Static test Daphnia magna (water flea)

Crustaceans

Algae Ethyl acetate

CAS: 141-78-6 CE:

LC50 350.000 –

600.000mg/L (96h) Oncorhynchus mykiss

(rainbow trout) Fish EC50 2.300,00 –

3.090,00mg/L (24h) Daphnia magna

(water flea) Crustaceans

EC50 4.300,00mg/L (24h) Algae

12.2 Persistence and Degradability

Based on available data, the classification criteria are not met.

12.3 Mobility on soil

Based on available data, the classification criteria are not met.

12.4 Bioaccumulative potential

Based on available data, the classification criteria are not met.

12.5 Other adverse effects

Harmful to aquatic life with long lasting Environmental Adverse Effects

Based on available data, the classification criteria are not met.

(10)

BOSSAUTO INNOVA, S.A.

Pol. Ind. Valldoriolf C/ Thomas Edison 16, 08430 La Roca del Vallés. Barcelona t: +34 938 604 923 / f: +34 938 712 336 info@bossauto.com / www.bossauto.com

13. DISPOSAL CONSIDERATIONS 13.1 Waste treatment methods:

Product:

Observe all federal, state, and local environmental regulations. Offer surplus and non-recyclable products to a licensed disposal company.

Contaminated packaging.

14. INFORMACIÓN RELATIVA AL TRANSPORTE 14.1 UN Number

·ADR, IMDG, IATA UN1760

14.2 ONU Shipping name:

ADR, IATA

IMDG CORROSIVE LIQUID N.O.S.

CORROSIVE LIQUID N.O.S.

14.3 Hazard transport ADR

Class

Label 8

IATA

Class

Label 8

Marine pollutant transport IMDG

Class

Label 8

14.4 Packing group ADR, IATA

IMDG: n

m 14.5 Dangerous for the environment No 14.6 Special provisions

ADR, IATA -

(11)

BOSSAUTO INNOVA, S.A.

Pol. Ind. Valldoriolf C/ Thomas Edison 16, 08430 La Roca del Vallés. Barcelona t: +34 938 604 923 / f: +34 938 712 336 info@bossauto.com / www.bossauto.com

IMDG: -

Tunnel restriction code ADR IATA

IMGR

- -

Physio-chemical properties -

Limited quantities (LQ) -

14.7 Transport in bulk according to Annex II of MARPOL 73/78

and of the IBC Code

Not relevant

15. REGULATORY INFORMATION 15.1 International regulations:

Component EINECS TSCA DSL IECSC NZIoC PICCS KECI AICS ENCS Ethyl

acetate V V V V V V V V V

Ethanol V V V V V V V V V

Cyclohexylamine V V V V V V V V V

N, N-

dimethylformamide V V V V V V V V V

Dichloromethane V V V V V V V V V

Acetic acid V V V V V V V V V

Epoxy resin V V V V V V V V V

15.2 Chemical safety assessment:

For this product a chemical safety assessment was not carried out.

15.3 Safety, health and environmental regulations/legislation specific for the substance or mixture

No further information available.

16. OTHER INFORMATION

16.2 Abbreviations and acronyms

CAS# - Chemical Abstract Service number - used to uniquely identify chemical compounds pH - Relates to hydrogen ion concentration - this value will relate to a scale of 0 - 14, where 0 is highly acidic and 14 is highly alkaline

OSHA- Occupational Safety and Health Administration NTP - National Toxicilogy Program

IARC- International Agency for Research on Cancer

ACGIH 一 The American Conference of Governmental Industrial Hygienists ADR -Agreement on Dangerous Goods by Road

RID - Regulations Concerning the International Carriage of Dangerous Goods by Rail ICAO -International Civil Aviation Organization

IMDG - International Maritime Dangerous Goods

IMO - International Marine Organization

(12)

BOSSAUTO INNOVA, S.A.

Pol. Ind. Valldoriolf C/ Thomas Edison 16, 08430 La Roca del Vallés. Barcelona t: +34 938 604 923 / f: +34 938 712 336 info@bossauto.com / www.bossauto.com

The information contained in this security data sheet is based on sources, technical knowledge and current legislation at European and state level, without being able to guarantee its accuracy. This information cannot be considered a guarantee of the properties of the product, it is simply a description of the security requirements. The occupational methodology and conditions for users of this product are not within our awareness or control, and it is ultimately the responsibility of the user to take the necessary measures to obtain the legal requirements concerning the manipulation, storage, use and disposal of chemical products.

Figure

Updating...

References

Updating...

Related subjects :