NEW
EVEN MORE data acquisition and test stand automation
– the new class of data
User benefits
Complete hardware and software package Very cost effective
Extensive software package included Scalable, even for large applications Universal via USB or LAN
Easy to use
„Made in Germany“ quality Signal conditioning included
The plug&play complete package
Expert Series is the latest generation of data acquisition equipment from Delphin. Expert Key devices enable measurement data to be acquired, monitored and analysed and experiments and test stands to be automated. Expert Key devices have both USB and network interfaces that can be optionally used. Measurement data can be either acquired directly at a local PC or decentrally across a LAN.
Measurement can begin as soon as the device is connected to a PC via USB or Ethernet.
Expert Key devices are supplied with the powerful ProfiSignal Go software. ProfiSignal Go is professional PC software for the online and offline monitoring and analysis of measurement data. If you are already using other measurement software, the full service package also contains LabView™-driver, Diadem-Export, Modbus TCP and OPCServer.
The Expert Key L model, with plug-in screw terminals, has been developed especially for laboratory and experimental use. The Expert Key C model is available for fixed mountings, e.g. within a cabinet. The Expert Key M model is available for mobile use within a case and is equipped with variable connection options.
Saves Time
Saves Costs
Expert Key L
+
acquisition and testing technology
Fast and universal
Inputs and outputs of the Expert devices are universal and therefore suitable for a wide range of different types of applications. Each channel can be separately configured as an mV / V, mA, thermocouple or RTD input. A sampling rate of up to 100,000 measurement values per second can be optionally assigned to the channels. Inputs have galvanic isolation and therefore protected against earth loops.
Experiments can be controlled or events triggered via analog, digital or PWM outputs. Digital inputs are available for acquiring status, frequencies or impulses.
Input signals Output signals
Thermoelemente20 mA/mVPt100
Thermocouples
Thermoelemente20 mA/mVPt100
Voltage (mV, V) RTD
Current (mA) Digital / Frequency IN
Current (mA) PWM
Digital OUT
USB
Wide range of applications
In research and development, in experiments and laboratories, in industry
Data acquisition and analysis
Automation of measurement processes Experiment, trial and test stand automation Process visualization / analysis / automation Temperature measurement with RTD and thermocouples
Quality assurance and acquisition of operational data Monitoring and alarm functions
Laboratory data acquisition (also FDA 21 CFR part 11)
2 3
LAN data acquisition / analysis
Hardware:
Different models – one concept
Expert Key devices are equipped with USB and network interfaces that can be used as required. All models are available as type 100 or type 200. Type 100 is equipped with a wide range of analog and digital inputs and outputs
Model Expert Key
Type 100 200
Analog inputs (mV, mA, TE, RTD) 14 28
Analog outputs (mA, V) 2 2
Digital inputs 8 2
with counter function 2 –
Digital outputs 4 1
with PWM function 4 –
Expert Key C – the built-in model
Expert C models are identical to the laboratory models except for the metal enclosure. The enclosure design enables the devices to be used in cabinets, 19” racks or mobile measurement cases. For OEM solutions, the Expert Key can also be supplied without an enclosure.
Expert Key L –
the laboratory model
Expert Key 100L and 200L are designed for both table-top and wall-mounted usage. Delivery includes the brackets for wall-mounting. Pressing the detachable cover gives a clear overview of connections. Sensors and actuators are connected via plugs located on the side.
and is therefore highly suited for use within test engineering.
Type 200 has 28 universal inputs and is intended more for analog data acquisition.
Expert Key M –
for mobile applications
Expert Key 100M and 200M are portable measurement systems. The measurement cases are set-up for mobile use and are extremely flexible due to a range of connection options using clamps, plugs, etc.
4 5
Device type 100 200
Analog inputs 14 28
for RTD 4 8
Sensor types mV, mA, thermocouple, RT
Resolution (bit) 18
Sampling rate 100 kHz
Measurement range +- 100, 200, 500 mV; 1, 2, 5, 10 V
Compensation yes / 1 yes / 2
Galvanic isolation yes
Analog outputs 2 2
Resolution (bit) 16
Max. output rate 100 Hz
Output voltage / current 0 to 10 V / +- 10 V / 0 to 20 mA / 4 bis 20 mA / +- 20 mA
Galvanic isolation yes
Digital inputs 8 to 12 1
Input voltage / current 5 V, 12 V, 24 V, 48 V / 2,7 mA
Logic voltage level < 2,5 V = low / > 3 V high
Max. input frequency 10 kHz
Galvanic isolation yes
Digital inputs with counter function 2 1
Counter resolution 32
Max. input frequency / resolution 1 MHz / 1 µs
Measurement range 0,1 Hz to 1 MHz
Max. input voltage / current 5 V, 12 V, 24 V, 48 V / 1,5 mA
Galvanic isolation yes
Digital outputs 4 to 8 1
Max. switching voltage / current 30 V / 1 A or 40 V / 0,75 A or 50 V / 0,6 A
Max. switching delay 0,5 ms
Galvanic isolation yes
PWM outputs 4 1
Duty cycle 1:100 to 1:500
Max. switch voltage / current 30 V / 1 A or 40 V / 0, 75 A or 50 V / 0,6 A
PWM basic frequency 5 Hz to 10 kHz
Galvanic isolation yes
General information
Sensor connected using screw terminals with 0.14 - 2.5 mm² openings
Power supply external power supply
Max. power input 5 Watt
Power supply 9 to 24 VDC
Temperature range 0 to 50 °C
Environmentally friendly RoHS conform
Interfaces: USB or Ethernet USB 2.0 High Speed / LAN 100Base T
Dimensions Expert Key L 100/200 50 x 185 x 215 mm
Weight Expert Key L 100/200 750 g
Dimensions Expert Key C 100/200 57 x 280 x 208 mm
Weight Expert Key C 100/200 1500 g
Overview of technical specifications
Expert Key
ProfiSignal Go: Online and offline monitoring and analysis
ProfiSignal Go records measurement data, displays it as trends, analyses and exports it. Trends can be observed online and historical data simultaneously evaluated. Set- up is very simple. It takes just a few mouse clicks to get from sensor connection to trend output.
User benefits
No limit between online and offline evaluation Fast trend output even for large data volumes Intuitive and simple operation
Different trend diagrams y(t), y(x), logic Integrated monitoring and alarm functions Export function for MS Excel™and other analysis software
Trend in ProfiSignal Go
Software:
Trends without limits
There are practically no limits on how online and offline data can be portrayed. Zooming in on historical data can take place without having to interrupt the running of an experiment.
This function is unique and especially valued by customers.
As well as y(t) diagrams, y(x) and logic analysis diagrams
Extensive software interfaces
Expert Key are supplied with ProfiSignal Go as standard as well as with LabView™-driver, an OPC Server and a Modbus TCP for use within industrial environments.
A well-documented and extensive OCX interface is also supplied for self-programming purposes.
LabView™- driver
Software interfaces
DataService OPC
Server
OCX interface
Modbus TCP
TCP / IP USB
Automation
Parameter / Recipe input
Klicks
Data acquisition Monitoring Automation
Runtime system Development system Development system
Online trends Logger substitute Test stands
Historical measurement data Fault analysis Technical installations
Alarm tables Acquisition of fault data Laboratory automation
Data export Damage diagnostics Automated processes
Quality assurance Acquisition of operational data
Remote monitoring SQL interface
Comprehensive reporting
Basic Klicks
Typical applications for Go, Basic and Klicks
6 7
Extendable system
ProfiSignal – modular and extendable
ProfiSignal is available in three variations: Go, Basic and Klicks. Basic and Klicks offer more functions than Go
and provide a development environment for creating and amending individual applications. ProfiSignal Basic includes all functions of ProfiSignal Go. ProfiSignal Klicks includes all functions of ProfiSignal Basic.
ProfiSignal Basic
ProfiSignal Basic enables measurement data to be acquired, processes to be monitored, and testing procedures to be operated and observed. Basic provides many visualization tools and practical analysis functions including trend and characteristic curve portrayals. It also has report and print functions. ProfiSignal Basic is permanently configured and can be used for continuous processes (e.g. operational data acquisition) as well as batch processes (e.g. data from experiments and trials).
ProfiSignal Klicks
ProfiSignal Klicks is equipped with functions for automating processes and for generating user-defined reports. There are input screens for test parameters and recipes, a structure diagram function, documentation enhancements for reports and the Klicks automation programming language.
Klicks enables the easy generation and maintenance of applications. No specialist IT knowledge is required and therefore no learning of a programming language.
Basic
Reports / Protocols Operation / Observation
Measurement data analysis
Klicks
ISO 9001
certified Layout:
www.ttm-marketing.de, 4/10
Instrumentation & control Measurement, evaluation
Measurement, evaluation, monitoring, operation, observation, automation, parameter / recipe input, reports Instrumentation & control,
recording, monitoring
Basic
Measurement, evaluation, monitoring, operation, observation
For industrial applications
Field trials, servicing
Project planning, application develop- ment, installation, calibration, service hotline, training and more
For tests, research and development
– Product range
Delphin Technology AG Lustheide 81
Phone +49 2204 97685-0 Telefax +49 2204 97685-85
Mobile measurement case
Control cabinets Services
Laboratory devices