• No results found

High Performance Ceramic Lined Composite Pipes with ZrO2 Additive Prepared by Centrifugal SHS Process

N/A
N/A
Protected

Academic year: 2020

Share "High Performance Ceramic Lined Composite Pipes with ZrO2 Additive Prepared by Centrifugal SHS Process"

Copied!
9
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Fig. 1 SEM image (a) and XRD pattern (b) of 3 mol% Y2O3 doped ZrO2 powders.
Table 2 Thickness of ceramic layers and Fe-rich layers for CLCSPs adding with ZrO2.
Fig. 3 XRD patterns of ceramic layers adding with ZrO2: (a) 0%, (b) 2%, (c) 4%, (d) 6%, (e) 8%.
Fig. 5 Variation in preferred orientation factor with amount of ZrO2.
+4

References

Related documents

Objective: To estimate the cost-effectiveness of three alternative dietetic strategies for cow’s milk allergy in Brazil: 1) using an extensively hydrolyzed casein formula (eHCF;

In this research, classical data augmentation techniques along with CGAN based on a deep transfer learning model for COVID-19 detection in chest CT scan images will be

Phylogenetic, antigenic and biological characterization of pigeon paramyxovirus type 1 circulating in China RESEARCH Open Access Phylogenetic, antigenic and biological characterization

ing whether or not during this period any time was spent in child health conferences, school health services, out-patient clinics, hospital ward rounds, teaching, and other

Figure 6 shows a comparison between the simulated and measured normalized radiation pattern results of the proposed dual band-notched UWB antenna at selected frequencies (3, 5,

implementation of the Double-Multiple Streamtube model was modified so that the blade pitch angle was determined at each azimuth angle location based on the angle of attack

albicans in FLC is eliminated by cyclosporine experiments 1 and 2 are fully dominant with respect to ( Marchetti et al. 2000) and may be mitigated by alter- MIC or fitness and

A three-step procedure for the flexibility matrix calculation is presented in this paper: (i) a complete geomechanical model of the site with geological