• No results found

Heat Pipe Inspection System for Thermal Management in Electronic Circuit

N/A
N/A
Protected

Academic year: 2020

Share "Heat Pipe Inspection System for Thermal Management in Electronic Circuit"

Copied!
5
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Fig. 1.  A flow diagram of thernal-fluid in  heat pipes
Fig. 4.  Log-log graph of the flow properties
TABLE I.    RECORDS  PIPE  NO NOISE  10  PCS.
Fig. 9.  No noise in heatpipe

References

Related documents

It is possible to configure parking areas to make them more pedestrian friendly by adding protected walkways through the parking area from the street to the building.. These

Studies with P RNA from Escherichia coli (structural P RNA subtype A) and Bacillus subtilis (subtype B) have implied a specific role for two or more metal ions in

■ In main operations the power of the SIGMA 32 headstock (6.0 / 7.5 KW) coupled with the roughing tool allow for high depths of cut, resulting in the removal or large amount of

0.2% 0.4% 0.7% 0.8% 0.8% 0.9% 1.0% 1.0% 1.3% 1.3% 2.0% 2.1% 2.3% 2.4% 2.5% 2.5% 3.0% 3.8% 4.3% 4.5% 4.7% 4.8% 5.0% 5.3% 5.8% 6.3% 6.7% 6.8% 7.2% 9.8%

All pieces of information collected in the previous phases can be stored in a Working Matrix (see above), typically in one of the software tools already mentioned. Then it

This system determines proper ecological velocity profile to improve safety and the cruising range based on the road geometry, traffic speed limit zones, and the preceding ve-

1D, 2D, 3D: one, two, three dimensional; ASD-POCS: adaptive-steepest-descent-projection-onto-convex-sets; CBCT: cone beam computed tomography; CG: conjugate gradient; CT:

Although these systems have been proposed partially based on the issue of collision between the operating robot arm and the assistant’s instrument, they have several deficiencies: