• No results found

IC Card & SIM card Connector. Selection Guide

N/A
N/A
Protected

Academic year: 2021

Share "IC Card & SIM card Connector. Selection Guide"

Copied!
14
0
0

Loading.... (view fulltext now)

Full text

(1)

IC Card & SIM card Connector

Selection Guide

For more information

Solution Way Co.,Ltd

www.solutionway.com

ydlee@solutionway.com

Tel : 031-605-3800

(2)

HAMBURG INDUSTRIES CO., LTD.

6F., No.12, Lane 270, Sec.3, Pei Shen Rd., Shen Keng Hsiang, Taipei Hsien, Taiwan 222

For further information, please contact:

H&V COMBO CARD CONNECTOR ---- 200 Series (SIM+MICRO SD)

MSA-201

1. SIM: 8 pin

/

Micro SD: 8 pin

2. SMT Type (without post)

3. Dim.: 16.10L x 16.50W x 3.00H mm

4. Micro SD: Blade Switch (Normally Open)

5. Micro SD: Push-Push Type

MSA-202

1. SIM: 8 pin / Micro SD: 8 pin

2. SMT Type (with post)

3. Dim.: 27.36L x 18.55W x 2.95H mm

4. Metal Cover: Hinge Type

(3)

HAMBURG INDUSTRIES CO., LTD.

6F., No.12, Lane 270, Sec.3, Pei Shen Rd., Shen Keng Hsiang, Taipei Hsien, Taiwan 222

For further information, please contact:

H&V SMART CARD CONNECTOR ---- 300 Series

ICC-305

1. 6 pin

2. SMT Type (without post) 3. Blade Switch: Normally Open 4. Dim.: 21.25L x 11.18W x 2.50H mm

ICC-301

1. 8 pin

2. SMT Type (with post)

3. Blade Switch: Normally Open 4. Dim.: 28.77L x 18.97W x H mm

Base Stopper Total “H”

1.30 2.20 1.55 2.45 2.00 0.90 2.90

ICC-312

1. 8 pin

2. SMT type (with post)

3. Blade Switch: Normally Open 4. Dim.: 28.70L x 17.50W x H mm

Base Stopper Total “H”

1.40 2.30 2.50 3.40 3.00 3.90 3.50 4.40 4.20 0.90 5.10 4.70 0.90 / 1.10 5.60 / 5.80

ICC-311

1. 6, 8 pin

2. SMT Type (post optional) 3. Blade Switch: Normally Open 4. Dim.: 15.70L x 16.40W x 2.60H mm

ICC-303

1. 8 pin

2. SMT Type (with post)

3. Blade Switch: Normally Open 4. Dim.: 22.80L x 17.65W x H mm

Base Stopper Total “H” 2.60 1.20 3.80 2.90 1.00 3.90

ICC-313

1. 6 pin

2. SMT Type (without post) 3. Blade Switch: Normally Open 4. Dim.:15.85L x 16.50W x 3.00H mm

ICC-306

1. 8 pin

2. SMT type (with post)

3. Blade Switch: Normally Open 4. Dim.: 28.70L x 17.50W x H mm

Base Stopper Total “H”

1.50 2.40 3.00 3.90 3.50 4.40 4.30 5.20 4.70 0.90 5.60

ICC-325

1. 8 pin

2. SMT Type (without post) 3. Normal or Offset Type

(Offset 0.80 mm)

4. Blade Switch: Normally Open 5. Dim.: 24.00L x 18.75W x 2.75H mm

ICC-315

1. 6 pin

2. SMT Type (without post) 3. Blade Switch: Normally Close 4. Dim.: 16.00L x 15.55W x 3.80H mm

2009, 04

NEW

(4)

HAMBURG INDUSTRIES CO., LTD.

6F., No.12, Lane 270, Sec.3, Pei Shen Rd., Shen Keng Hsiang, Taipei Hsien, Taiwan 222

For further information, please contact:

H&V SMART CARD CONNECTOR ---- 400 Series

ICC-400

1. 8 pin

2. SMT Type (post optional)

3. Dim.: 23.60L x 10.15W x 1.30H mm

ICC-402

1. 6 pin

2. SMT Type (without post) 3. Dim.: 11.80L x 8.70W x 2.60H mm

ICC-404

1. 8 pin

2. SMT Type (without post)

3. Dim.: 11.80L x 10.62W x 2.60H mm

ICC-405

1. 6 pin

2. SMT Type (post optional)

3. Dim.: 11.80L x 8.70W x 1.80/2.00H mm

ICC-408

1. 6 pin

2. SMT Type (without post)

3. Dim.: 11.70L x 8.40W x 3.00/4.50H mm

ICC-408

1. 8 pin

2. SMT Type (without post)

3. Dim.: 11.70L x 11.00W x 3.00/4.50H mm

ICC-409

1. 6 pin

2. SMT Type (without post) 3. Dim.: 11.10L x 7.60W x

1.50/1.80/2.00/2.40/2.60H mm

ICC-410

1. 6 pin

2. SMT Type (without post) 3. Dim.: 11.80L x 7.50W x 5.25H mm

ICC-411

1. 6, 8 pin

2. SMT Type (post optional)

3. Dim.: 15.70L x 16.40W x 2.60H mm

ICC-412

1. 8 pin

2. SMT Type (with post)

3. Dim.: 22.65L x 11.60W x 1.80H mm

ICC-413

1. 6 pin

2. SMT Type (without post)

3. Dim.: 15.85L x 16.50W x 3.00H mm

ICC-415

1. 6, 8 pin

2. SMT Type (post optional)

3. Dim.: 14.20L x 16.30W x 1.90H mm

ICC-416

1. 6, 8 pin

2. SMT Type (post optional)

3. Dim.: 17.55L x 16.50W x 2.00H mm

ICC-417

1. 6, 8 pin

2. SMT Type (without post)

3. Dim.: 10.70L x 15.60W x 3.00H mm

ICC-421

1. 6 pin

2. SMT Type (post optional)

(5)

HAMBURG INDUSTRIES CO., LTD.

6F., No.12, Lane 270, Sec.3, Pei Shen Rd., Shen Keng Hsiang, Taipei Hsien, Taiwan 222

For further information, please contact:

ICC-422 Type1

1. 6 pin

2. SMT Type (post optional) 3. Dim.: 13.90L x 16.30W x

2.20/2.40/2.60H mm

ICC-422 Type2

1. 6, 8 pin

2. SMT Type (without post)

3. Dim.: 13.90L x 16.30W x 2.20H mm

ICC-423

1. 6 pin

2. SMT Type (post optional)

3. Dim.: 13.90L x 16.30W x 1.80H mm

ICC-425

1. 6, 8 pin

2. SMT Type (without post)

3. Dim.: 14.90L x 16.30W x 1.90H mm

ICC-426

1. 6, 8 pin

2. SMT Type (without post)

3. Dim.: 18.70L x 16.50W x 2.60H mm 4. Metal Cover: Hinge Type

ICC-427

1. 6 pin

2. SMT Type (post optional)

3. Dim.: 15.70L x 16.40W x 2.80H mm

ICC-428

1. 6 pin

2. SMT Type (post optional)

3. Dim.: 12.10L x 16.40W x 2.80H mm

ICC-429

1. 6, 8 pin

2. SMT Type (without post)

3. Dim.: 14.20L x 16.30W x 1.90H mm

ICC-430

1. 6, 8 pin

2. SMT Type (without post)

3. Dim.: 15.30L x 16.50W x 1.65H mm

ICC-431

1. 6, 8 pin

2. SMT Type (without post)

3. Dim.: 13.90L x 16.30W x 2.40/2.60H mm

ICC-432

1. 6, 8 pin

2. SMT Type (without post)

3. Dim.:13.90L x 16.30W x 2.20H mm

ICC-432

1. 6, 8 pin

2. SMT Type (without post)

3. Dim.:13.90L x 16.30W x 2.80H mm

ICC-433

1. 6, 8 pin

2. SMT Type (without post)

3. Dim.: 15.30L x 16.50W x 1.65H mm

ICC-435

1. 6, 8 pin

2. SMT Type (without post)

3. Dim.: 19.15L x 16.50W x 1.60H mm

ICC-436

1. 6, 8 pin

2. SMT Type (post optional)

3. Dim.: 18.70L x 16.60W x 2.60H mm 4. Metal Cover: Hinge Type

(6)

HAMBURG INDUSTRIES CO., LTD.

6F., No.12, Lane 270, Sec.3, Pei Shen Rd., Shen Keng Hsiang, Taipei Hsien, Taiwan 222

For further information, please contact:

ICC-437

1. 8 pin

2. SMT Type (with post)

3. Dim.: 15.70L x 16.40W x 4.50H mm 4. Standoff= 1.90 mm

ICC-438

1. 6 pin

2. SMT Type (without post)

3. Dim.: 10.30L x 15.65W x 2.40H mm

ICC-438

1. 6 pin

2. SMT Type (without post)

3. Dim.: 10.30L x 15.65W x 2.90H mm

ICC-439

1. 8 pin

2. SMT Type (with post)

3. Dim.: 15.70L x 16.40W x 4.80H mm 4. Standoff= 2.20 mm

ICC-450

1. 8 pin

2. SMT Type (with post)

3. Dim.: 15.70L x 16.40W x 4.50H mm 4. Standoff= 1.90 mm

ICC-451

1. 6, 8 pin

2. SMT Type (without post)

3. Dim.: 15.10L x 16.70W x 4.75H mm 4. Standoff= 2.30 mm

ICC-452

1. 6, 8 pin

2. SMT Type (without post)

3. Dim.: 13.95L x 16.30W x 2.10H mm

ICC-453

1. 6, 8 pin

2. SMT Type (with post)

3. Dim.: 14.35L x 17.30W x 2.45H mm

ICC-455

1. 8 pin (Dual SIM Type) 2. SMT Type (without post)

3. Dim.: 17.50L x 17.50W x 3.05H mm

ICC-458

1. 6, 8 pin

2. SMT Type (without post)

3. Dim.: 13.46L x 16.30W x 1.90H mm

ICC-459

1. 6 pin

2. SMT Type (without post)

3. Dim.: 10.00L x 7.60W x 1.20/1.40H mm

ICC-468

1. 6 pin

2. SMT Type (without post)

3. Dim.: 9.40L x 16.40W x 2.90H mm

ICC-469

1. 6 pin

2. SMT Type (without post) 3. Dim.: 11.10L x 7.60W x

1.50H mm

ICC-478

1. 6 pin

2. SMT Type (without post) 3. Dim.: 13.00L x 16.30W x

1.80H mm

ICC-480

1. 6 pin

2. SMT Type (without post) 3. Dim.: 13.95L x 8.50W x

0.50/0.70/0.90H mm

ICC-480

1. 8 pin

2. SMT Type (without post) 3. Dim.: 13.95L x 11.00W x

0.50/0.70/0.90H mm 2009, 04

NEW

(7)

HAMBURG INDUSTRIES CO., LTD.

6F., No.12, Lane 270, Sec.3, Pei Shen Rd., Shen Keng Hsiang, Taipei Hsien, Taiwan 222

For further information, please contact:

H&V SIM CARD ACCEPTOR ---- 500 Series

ICA-503

1. 6, 8 pin

2. SMT Type (post optional)

3. Dim.: 25.50L x 17.20W x 2.50H mm

ICA-510

1. 6, 8 pin

2. SMT Type (post optional)

3. Dim.: 29.65L x 17.20W x 3.00H mm 4. Plastic Cover: Hinge Type

ICA-580

1. 6 pin

2. SMT Type (post optional)

3. Dim.: 29.95L x 16.20W x 2.90H mm 4. Metal Cover: Hinge Type

ICA-505

1. 6, 8 pin

2. SMT Type (post optional)

3. Dim.: 25.50L x 19.70W x 2.50H mm 4. Push Type: with a push bar

ICA-511

1. 6, 8 pin

2. SMT Type (without post)

3. Dim.: 25.85L x 18.10W x 1.70H mm 4. Metal Cover: Hinge Type

ICA-560

1. 6, 8 pin

2. SMT Type (post optional) 3. Blade Switch: Normally Open 4. Dim.: 29.65L x 17.20W x 3.00H mm 5. Plastic Cover: Hinge Type

ICA-506

1. 6, 8 pin

2. SMT Type (post optional)

3. Dim.: 29.85L x 17.30W x 1.80H mm 4. Plastic Cover: Hinge Type

ICA-518

1. 6, 8 pin

2. SMT Type (with post)

3. Dim.: 27.55L x 18.70W x 1.90H mm 4. Metal Cover: Push Push Type

ICA-567

1. 6, 8 pin

2. SMT Type (post optional) 3. Blade Switch: Normally Open 4. Dim.: 29.65L x 17.20W x 2.00H mm 5. Plastic Cover: Hinge Type

ICA-508

1. 6, 8 pin

2. SMT Type (without post)

3. Dim.: 27.55L x 18.70W x 1.90H mm 4. Metal Cover: Push Push Type

ICA-509

1. 6 pin

2. SMT Type (without post)

3. Dim.: 25.50L x 17.70W x 1.95H mm 4. Metal Cover: Hinge Type

ICA-521

1. 6, 8 pin

2. SMT Type (post optional)

3. Dim.: 29.65L x 17.20W x 2.20H mm 4. Plastic Cover: Hinge Type

ICA-568

1. 6, 8 pin

2. SMT Type (post optional) 3. Blade Switch: Normally Close 4. Dim.: 27.55L x 18.70W x 1.90H mm 5. Metal Cover: Push Push Type

(8)

HAMBURG INDUSTRIES CO., LTD.

6F., No.12, Lane 270, Sec.3, Pei Shen Rd., Shen Keng Hsiang, Taipei Hsien, Taiwan 222

For further information, please contact:

H&V SMART CARD ACCEPTOR ---- 600 Series A (Friction Technology)

--- EMV Compliant

ICA-602

1. 8 pin

2. DIP or SMT Type (with post) 3. Sealed Switch: Normally Open 4. Dim.: 55.50L x 40.00W x 5.80H mm

ICA-608

1. 8 pin

2. DIP or SMT Type (with post) 3. Blade Switch: Normally Open 4. Dim.: 55.50L x 40.00W x 5.80H mm

ICA-605

1. 8 pin 2. DIP Type

3. Blade Switch: Normally Open 4. Dim.: 62.60L x 30.00W x 6.80H mm

ICA-606

1. 8 pin 2. DIP Type

3. Blade Switch: Normally Open 4. Dim.: 56.20L x 40.00W x 6.80H mm

ICA-607

1. 8 pin

2. SMT Type (with post)

3. Blade Switch: Normally Open 4. Dim.: 56.00L x 31.10W x 3.65H mm

ICA-617

1. 8 pin

2. SMT Type (with post)

3. Blade Switch: Normally Open 4. Dim.: 56.00L x 31.10W x 3.65H mm

ICA-610

1. 8 pin

2. SMT Type (with post*2 or post*4) 3. Blade Switch: Normally Open 4. Dim.: 55.60L x 36.20W x 5.90H mm 5. Standoff=1.00 mm

ICA-616

1. 8 pin

2. SMT Type (with post)

3. Sealed Switch: Normally Open 4. Dim.: 56.10L x 40.00W x 6.20H mm 5. PCI Compliant

2009, 04

NEW

(9)

HAMBURG INDUSTRIES CO., LTD.

6F., No.12, Lane 270, Sec.3, Pei Shen Rd., Shen Keng Hsiang, Taipei Hsien, Taiwan 222

For further information, please contact:

Base Standoff Total ”H” 5.90 0.00 5.90 5.90 1.90 7.80 5.90 4.75 10.65 5.90 5.55 11.45 5.90 10.00 15.90

H&V SMART CARD ACCEPTOR ---- 600 Series B (Friction Technology)

--- EMV & NDS Compliant

ICA-603

1. 8 pin 2. DIP Type

3. Blade Switch: Normally Open or Close 4. Dim.: 62.00L x 40.00W x 6.25H mm

ICA-613 1. 8 pin 2. DIP Type

3. Blade Switch: Normally Open or Close 4. Dim.: 62.00L x 40.00W x H mm

Base Standoff Total ”H” 6.15 0.65 6.80 6.15 3.00 9.15

ICA-623

1. 8 pin 2. DIP Type

3. Blade Switch: Normally Open or Close 4. Dim.: 62.00L x 40.00W x 13.50H mm 5. Standoff=7.35 mm

ICA-609

1. 8 pin 2. DIP Type

3. Blade Switch: Normally Open or Close 4. Dim.: 62.00L x 40.00W x 6.25H mm

ICA-619 1. 8 pin 2. DIP Type

3. Blade Switch: Normally Open or Close 4. Dim.: 62.00L x 40.00W x H mm

Base Standoff Total ”H” 6.25 1.40 7.65 6.25 3.15 9.40 6.25 3.50 9.75 6.25 5.55 11.80 ICA-629 1. 8 pin 2. DIP Type

3. Blade Switch: Normally Close (both side) 4. Dim.: 62.00L x 40.50W x 6.25H mm ICA-615

1. 8 pin 2. DIP Type

3. Blade Switch: Normally Open or Close 4. Dim.: 62.00L x 40.00W x 9.15H mm 5. Standoff=3.00 mm

ICA-653 Type1

1. 8 pin 2. DIP Type

3. Blade Switch: Normally Open or Close 4. Dim.: 62.00L x 40.00W x 6.25H mm

ICA-659 1. 8 pin 2. DIP Type

3. Blade Switch: Normally Close (both side) 4. Dim.: 62.00L x 40.50W x H mm

Base Standoff Total ”H” 6.25 0.55 6.80 6.25 3.15 9.40 6.25 3.50 9.75 6.25 5.55 11.80 ICA-618 1. 8 pin 2. DIP Type

3. Blade Switch: Normally Open or Close 4. Dim.: 64.00L x 48.00W x 7.50H mm

ICA-653 Type2

1. 8 pin 2. DIP Type

3. Blade Switch: Normally Open or Close 4. Dim.: 62.00L x 40.00W x H mm

Base Standoff Total ”H” 6.25 7.60 13.85 6.25 14.0 20.25

ICA-620 1. 8 pin 2. DIP Type

3. Blade Switch: Normally Close 4. Dim.: 62.00L x 40.00W x H mm

Base Standoff Total ”H” 7.55 0.00 7.55 7.55 0.65 8.20 7.55 3.00 10.55 7.55 7.35 14.90

5. With Heat-dissipation Function ICA-611

1. 8 pin

2. DIP Type, Reverse Type 3. Blade Switch: Normally Close 4. Dim.: 61.10L x 40.00W x H mm 5. PCI Compliant

ICA-612

1. 16 pin

2. Double row data contacts 3. DIP Type

4. Blade Switch: Normally Close (both side) 5. Dim.: 62.00L x 48.00W x 8.15H mm

2009, 04

(10)

HAMBURG INDUSTRIES CO., LTD.

6F., No.12, Lane 270, Sec.3, Pei Shen Rd., Shen Keng Hsiang, Taipei Hsien, Taiwan 222

For further information, please contact:

H&V SMART CARD ACCEPTOR ---- 600 Series C (Friction Technology)

ICA-638 Type1

1. 8 pin

2. DIP Type (with PCB)

3. Blade Switch: Normally Close 4. Dim.: 68.00L x 62.00W x 20.25H mm 5. Standoff=13.20 mm

ICA-638 Type2

1. 8 pin

2. DIP Type (with PCB)

3. Blade Switch: Normally Close 4. Dim.: 84.15L x 71.60W x 27.15H mm 5. Standoff=20.00 mm

ICA-639 Type1

1. 8 pin

2. DIP Type (with PCB)

3. Blade Switch: Normally Close 4. Dim.: 63.00L x 40.00W x H mm

Base Standoff Total “H” 6.25 8.75 15.00 6.25 14.70 20.95 6.25 17.00 23.25

ICA-639 Type2

1. 8 pin

2. DIP Type (with PCB)

3. Blade Switch: Normally Close 4. Dim.: 71.00L x 40.00W x 23.85H mm 5. Standoff=17.60 mm

ICA-632

1. 8 pin 2. DIP Type

3. Blade Switch: Normally Open 4. Dim.: 82.00L x 62.00W x 27.25H mm 5. Standoff=20.00 mm

ICA-669

1. 8 pin

2. DIP Type (with PCB)

3. Blade Switch: Normally Open or Close 4. Dim.: 62.00L x 40.00W x 17.75H mm

ICA-663

1. 8 pin

2. DIP Type (with PCB)

3. Blade Switch: Normally Open or Close 4. Dim.: 62.00L x 40.00W x 17.75H mm

ICA-673

1. 8 pin

2. DIP Type (with PCB)

3. Blade Switch: Normally Open or Close 4. Dim.: 62.00L x 40.00W x H mm

Base Standoff Total “H” 17.65 3.00 20.65 17.65 7.35 25.00

ICA-679

1. 8 pin

2. DIP Type (with PCB)

3. Blade Switch: Normally Open or Close 4. Dim.: 62.00L x 40.00W x H mm

Base Standoff Total “H” 17.75 1.40 19.15 17.75 3.15 20.90 17.75 3.50 21.25 17.75 5.55 23.30

ICA-699

1. 8 pin

2. DIP Type (with PCB)

3. Blade Switch: Normally Close 4. Dim.: 63.00L x 40.00W x H mm

Base Standoff Total “H” 17.75 8.75 26.50 17.75 14.70 32.45 17.75 17.00 34.75

(11)

HAMBURG INDUSTRIES CO., LTD.

6F., No.12, Lane 270, Sec.3, Pei Shen Rd., Shen Keng Hsiang, Taipei Hsien, Taiwan 222

For further information, please contact:

H&V SMART CARD ACCEPTOR ---- 700 Series (Landing Technology)

--- EMV Compliant

ICA-700

1. 8, 16 pin

2. SMT or DIP Type

3. Sealed Switch: Normally Open

4. Dim.: 55.50L x 40.00W x 5.80H mm

5. Durability: 200,000 cycles min.

ICA-702

1. 8 pin

2. SMT or DIP Type

3. Blade Switch: Normally Open

4. Dim.: 55.50L x 40.00W x 5.80H mm

5. Durability: 200,000 cycles min.

ICA-705

1. 8 pin

2. SMT or DIP Type

3. Sealed Switch: Normally Open

4. Dim.: 55.50L x 40.00W x 5.80H mm

5. Durability: 500,000 cycles min.

ICA-703

1. 8 pin

2. SMT or DIP Type

3. Blade Switch: Normally Open

4. Dim.: 55.50L x 40.00W x 5.80H mm

5. Durability: 500,000 cycles min.

ICA-706

1. 8 pin

2. SMT Type (with post)

3. Sealed Switch: Normally Open

4. Dim.: 56.10L x 40.00W x 6.30H mm

5. Durability: 500,000 cycles min.

6. PCI Compliant

ICA-707

1. 8 pin

2. SMT Type (with post)

3. Sealed Switch: Normally Open

4. Dim.: 55.50L x 40.00W x 6.30H mm

5. Durability: 500,000 cycles min.

6. PCI Compliant

2009, 04

(12)

HAMBURG INDUSTRIES CO., LTD.

6F., No.12, Lane 270, Sec.3, Pei Shen Rd., Shen Keng Hsiang, Taipei Hsien, Taiwan 222

For further information, please contact:

H&V SMART CARD ACCEPTOR ---- 800 Series (with FPC)

ICA-803

1. 8 pin

2. Blade Switch: Normally Open or Close

3. Friction Technology

4. Dim.: 62.00L x 40.00W x 6.25H mm

5. FPC pitch 1.0 or 1.25 optional, L=140 mm

ICA-809

1. 8 pin

2. Blade Switch: Normally Open or Close

3. Friction Technology

4. Dim.: 62.00L x 40.00W x 6.25H mm

5. FPC pitch 1.0 or 1.25 optional, L=140 mm

ICA-812

1. 16 pin

2. Blade Switch: Normally Close

3. Friction Technology

4. Dim.: 63.50L x 60.20W x 6.25H mm

5. FPC pitch 1.25, L=115 mm

ICA-853

1. 8 pin

2. Blade Switch: Normally Open

3. Friction Technology

4. Dim.: 62.00L x 40.00W x 6.25H mm

5. FPC pitch 1.0

(13)

HAMBURG INDUSTRIES CO., LTD.

6F., No.12, Lane 270, Sec.3, Pei Shen Rd., Shen Keng Hsiang, Taipei Hsien, Taiwan 222

For further information, please contact:

H&V MEMORY CARD CONNECTOR ---- MCA Series

MCA-T01

--- MICRO SD CARD CONNECTOR

1. 8 pin

2. SMT Type (without post) 3. Metal Cover: Hinge Type

4. Dim.: 13.60L x 13.30W x 1.85H mm

MCA-T06

--- MICRO SD CARD CONNECTOR

1. 8 pin

2. SMT Type (without post) 3. Metal Cover: Hinge Type

4. Dim.: 13.60L x 13.30W x 1.85H mm

MCA-T02

--- MICRO SD CARD CONNECTOR

1. 8 pin

2. SMT Type (without post) 3. Push Push Type

4. Dim.: 14.00L x 15.20W x 1.88H mm

MCA-T03

--- MICRO SD CARD CONNECTOR

1. 8 pin

2. SMT Type (without post) 3. Push Push Type

4. Blade Switch: Normally Open 5. Dim.: 13.80L x 16.00W x 1.80H mm

MCA-S01

--- MINI SD CARD CONNECTOR

1. 11 pin

2. SMT Type (post optional)

3. Dim.: 21.90L x 13.15W x 2.20/2.40H mm

MCA-P01

--- PCMCIA CONNECTOR

1. 68 pin

2. SMT Type (offset 0.30mm) 3. Grounding Lug Optional

4. Dim.: 46.50L x 6.00W x 3.30H mm

(14)

HAMBURG INDUSTRIES CO., LTD.

6F., No.12, Lane 270, Sec.3, Pei Shen Rd., Shen Keng Hsiang, Taipei Hsien, Taiwan 222

For further information, please contact:

H&V FPC/FFC CONNECTOR ---- FCC Series

FCC-A00

1. 04~40 pin

2. SMT Type (without post)

3. Dim.:

θ

(Pin*1)+3

ι

L x 3.00W x 5.20H mm

4. FPC/FFC Thickness: 0.30±0.05 mm

5. Operation: Vertical Type

6. Durability: 20 cycles min.

FCC-A01

1. 04~30 pin

2. SMT Type (with ground pin)

3. Dim.:

θ

(Pin*1)+3.6

ι

L x 4.75W x 3.00H mm

4. FPC/FFC Thickness: 0.30±0.05 mm

5. Operation: Horizontal Type

6. Durability: 20 cycles min.

2009, 04

NEW

References

Related documents

AirLive FE-200VD comes with free 64-channel recording software that provides video recording and live view function. In addition, the recording software even provides camera

SIM1 — Use the SIM card in the internal SIM card holder as the default SIM card to make a call, send a message, or transfer mobile data.. SIM2 — Use the SIM card in the external

When the show is copied to the SD card using the Hardware Utility, you can select whether the trigger switch input for that show is to be normally open (default) or normally

Insert the SD card into your computer’s SD card slot, open the Doxie app, then click Import.. Browse and

If parameter Backup SIM card is set to none, then parameters Switch to other SIM card when connection fails, Switch to backup SIM card when roaming is detected and switch to default

(7) If the SD/SDHC/SDXC Card cannot be recognized by the SD Card Formatter after the card is inserted into an SD interface device (SD Card slot on PC, USB SD Card reader), check

Note: The TF card (Micro SD card) is not included in the package. You need the micro SD card only when you need extra storage space or transfer files from other

Make sure to disconnect the power source from your router before inserting and removing your SIM card.. Micro SD card is used for storing R3000’s log