• No results found

OPTIMIZATION OF CUTTING PARAMETERS FOR TURNING INCONEL 718 WITH CARBIDE INSERT

N/A
N/A
Protected

Academic year: 2020

Share "OPTIMIZATION OF CUTTING PARAMETERS FOR TURNING INCONEL 718 WITH CARBIDE INSERT"

Copied!
11
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Table 1 composition of element present in inconel 718
Table 3 Experimental result
Table 4 shows the ANOVA for surface roughness. The purpose of the ANOVO is to  determine the process parameters which significantly affect the performance characteristic .It has absorbed that the depth of cut has insignificant effect on surface roughness It has found that cutting speed and feed has significant effect on Ra.Based on ANOVA analysis ,the optimum cutting parameters for surface roughness are the cutting speed at level ,feed rate at level and depth of cut at level
Table 5 Response Table for Signal to Noise Ratios Smaller is better
+2

References

Related documents

The results show that using the generated data-centric social context is able to predict individual’s phone call activities e ff ectively in various machine learning based

While non-convulsive seizures (NCS) are associated to poor outcomes in the general ICU population, in the critically ill cancer patient, they are associated to lower prevalence of

From the view of individual social groups, the nearest to the universal average were the con- sumer bounds of demand for foodstuff s in regard to incomes of the employees

will maintain the authorized user to access the information from the interconnected sensor devices.. Internet of Everything will connect the authorized user with

neoformans , the ␤ subunit of a heterotrimeric G protein (Gpb1p) has been shown to play a critical role in mating and haploid fruiting, presumably through a pheromone-triggered

while  his  writing  reflects  more  singular

Our study character- izes several properties of broadband networks, including link capacities, packet round-trip times and jitter, packet loss rates, queue lengths, and queue

[r]