Restorative Products & Procedures

(1)

1

Restorative Products & Procedures

The name you know, the quality you expect

See back cover

NEW!

(2)

1

9007091 Traxodent Value Pack (25 syringes and 50 tips) 9007093 Traxodent Starter Pack (7 syringes and 15 tips) 9007092 Applicator Tips (50)

traxodent

®

Hemodent

®

Paste Retraction System

Easy, effective hemostasis and retraction

The sleek syringe with bendable tip permits easy application of Traxodent directly into the sulcus. After two minutes, it is rinsed, leaving an open, retracted sulcus.

Traxodent is gentle, absorbent and fast.

The soft paste produces gentle pressure on the sulcus while it absorbs excess crevicular fluid and blood. The aluminum chloride creates an astringent effect without irritating or discoloring surrounding tissue. Traxodent provides predictable hemostasis and retraction in less time and with greater comfort.

Quick effective retraction

About 2 minutes - no fumbling with hemostatic solutions - save chair time

Superior hemostasis

Stops bleeding and crevicular seepage while retraction occurs - easily absorbs excess crevicular fluid

Increased patient comfort

Avoid tearing gingiva - less pressure on sensitive tissue

Convenient delivery system

No cumbersome and expensive guns or cartridges - ergonomic disposable syringe and bendable syringe tip provides excellent reach

Maximum freshness

Each syringe is packaged in resealable foil pouches

Traxodent® from Premier® provides predictable hemostasis and soft-tissue management in minutes.

Traxodent applied Post-op

Clinical images courtesy of Shalom Mehler DMD, Teaneck, NJ.

Awarded Top 100 Products in 2010 & 2011 Awarded Preferred Product

in 2012, 2013 & 2014

1. Strategic Dental Marketing, 2015. Go to www.premusa.com to view an online tutorial!

(3)

2

Premier® Retraction Caps

Anatomic formed cotton caps work synergistically with

Traxodent to quicken and assist retraction and hemostasis.

• Easily guides Traxodent into the sulcus

• Compression assists and quickens hemostasis • Cotton absorbs fluids

• Anatomic form allows easy placement 9048251 Size 1 - Small (120) 9048253 Size 3 - Medium (120) 9048255 Size 5 - Large (60) 9048260 Assorted - (15) #1, (15) #3, (30) #5 _#1 #3 #5

“When a 1- to 2-mm-deep subgingival preparation

finish line is formed on a healthy gingival margin, the

displacement paste (Traxodent) and cap application

may be the first choice, giving the benefits of

hemo-stasis, time saving and ease of application.”

2

Bend tip for optimal access. Position tip parallel to axial plane of the tooth.

Place Premier® Retraction Cap on tooth structure.

Rinse away, leaving sulcus open and accessible.

Have the patient bite and maintain pressure on the cap. Wait 2 minutes.

Dispense sufficient material to displace tissue.

Optional Cord Technique

Traxodent eliminates the need for a second cord.

1

2

3

4

5

6

Place a single strand of retraction cord.

Rinse away, leaving sulcus open and accessible.

Dispense sufficient material to displace tissue. Wait about 2 minutes.

1

2min

2

3

2. Ozlem Acar, DDS, Selim Erkut, DDS, PhD, Tuncer Burak Özçelik, DDS, PhD, Erdem Ozdemir, DDS & Mehtap Akçil, DDS, PhD. (published online 20 December 2013). A clinical comparison of cordless and conventional displacement systems regarding clinical performance and impression quality. Journal of Prosthetic Dentistry, Volume 111 (Issue 5), May 2014, Pages 388-394.

(4)

3

IntegraPost

®

Ultra-passive Integrating Core Retainer

IntegraPost Drills (3 each) 3001205 Size 3 (yellow) 3001210 Size 4 (red) 3001215 Size 4.5 (purple) 3001225 Size 5 (blue) 3001230 Size 6 (green)

3001235 Assorted (5), one of each size

IntegraPost Refills (10 each) 3001105 Size 3 3001110 Size 4 3001115 Size 4.5 3001125 Size 5 3001130 Size 6 IntegraPost® is Safe and Secure.

The IntegraPost features an innovative round Flow-Thru-Head® and a parallel passive design to optimize the adhesive buffer zone, conserve tooth structure and minimize stress.3,4,5

IntegraPost Balances Strength with Elasticity. Made from bio-compatible titanium alloy, IntegraPost is stronger than resin fiber, yet more elastic than stainless steel.6 IntegraPost is Easy to Use.

Six post sizes and corresponding drills make post selection a simple process. The unique post carrier facilitates handling.

3001001 IntegraPost Mini Intro Kit

Contains 6 posts (2 each sizes 3, 4 and 4.5), 3 drills (1 each sizes 3, 4 and 4.5) and IP carrier

3001301 IP Carrier 3001305 IP Probe

In a 2006

ADA Professional Product Review

on Endodontic Posts, which included metal, fiber and a ceramic post,

IntegraPost

received the

highest laboratory

rating of 92%

with a buyer’s satisfaction of

excellent!

7

Visit www.premusa.com for a brief IntegraPost tutorial.

Safe and Simple to Use – Composite Zirconia Glass Fiber composition won’t fracture root and provides easy non-traumatic removal

Aesthetic –White color of post guarantees no grey shadow or show through

Strong and Flexible – Elastic modulus and flexural strength more like tooth structure allowing the post to respond like the tooth to traumatic stresses. (E-modulus 52 GPa/Flexural Strength 1650 MPa)

Factory Silanated for Secure Adhesion – Post is chemically treated to bond with both resin cement and composite core build-up material.

Light Transmitting – Photo curing through the post assures complete polymerization of cement around and down the post length.

Color Coded – Posts easily identified and size selected. Color coding matches existing IntegraPost Drills.

Four Post Sizes – Multiple sizes for easy fit in all teeth and any canal space. All sizes fit IntegraPost “Hot Box” organizer.

Tapered Tip Design – Parallel body with slightly tapered tip conforms to apical root anatomy for safe and effective adaptation of post.

3001600 Intro Kit

Contains: 20 posts, (5) each #4, #4.5,#5, #6 and (4) corresponding drills 3001601 Mini Intro Kit

Contains: 10 posts, (5) each #4, #5 and (2) corresponding drills

Cure-Thru

®

IntegraPost

®

Light-transmitting Zirconia Glass Fiber Post

3-6. Full bibliography available. / 7. American Dental Association Professional Product Review™ Publication by the ADA Council on Scientific Affairs, Vol. 1, Spring 2006. / IntegraPost designed by Endodontist, Dr. Phil Klein.

Refills (10 pack) 3001610 Size 4 (red) 3001611 Size 4.5 (purple) 3001612 Size 5 (blue) 3001613 Size 6 (green) 4 4.5 5 6

(5)

4

IntegraBond

™

Universal Adhesive System

Offers outstanding shear bond strength to all popular light, dual- or auto-cure composites. Use IntegraBond after acid-etching.

Over 10 years Proven

Performance & Reliability

IntegraCem

™

Dual-Cure Resin Cement

Easy Technique

IntegraCem’s low viscosity and thin film thickness allows excess cement to vent evenly for precise marginal fit. After a 10-sec. light-cure (halogen), easily remove cement flashing.

Ideal for “Bonded” Amalgam

IntegraCem has superior bond-strength to all surfaces, especially metal. Formulated to chemically bond to fresh amalgam, IntegraCem will eliminate sensitivity and permanently seal all restorative margins.

Dual-Cure with Anaerobic Accelerator17

Posts can be stabilized immediately by light-curing; IntegraCem’s anaerobic accelerator guarantees complete curing even at the bottom of the post preparation.

8-16. Full bibliography available.

17. I. Eppelbaum, H Dodik, S Kenig, B. Zalsman, A. Valdman, and R. Pilo. “The Role of an Anaerobic Accelerator in Dental Adhesives” J. Adhesion Sci.. Technl., Vol 10, No 10, pp 10075-1087 (1996).

3001410 Base & Catalyst- 4g each 3001421 IntegraBond Adhesive Kit

Contains: 4ml IntegraBond, 4ml Auto-Cure Activator, (2) 1.2ml Premier Etch Syringes, 50 Microbrushes, 20 Disposable Etch Tips, Mix Wells

3001411 IntegraBond - 7ml 3001412 Auto-Cure Activator - 7ml

for use when light-curing is not possible 3001413 IntegraBond - 4ml

Clinically proven IntegraBond

8-16

_-

provides outstanding performance

for all restorative challenges!

Great

Value!

Non-impregnated

Knitted Weave

Impregnated

Hemodent

®

Buffered Aluminum

Chloride Epinephrine-free

Hemostatic Liquid

9007071 10cc bottle 9007072 20cc bottle 9007073 40cc bottle • Effectively stops minor gingival bleeding • Epinephrine-free to avoid cardiac reactions

• Stable and offers a long shelf-life

FS Hemostatic

™

15.5% Ferric Sulfate Liquid

Stops Heavier Bleeding

9007057 1oz dropper bottle (29.5ml) 9007058 2oz refill bottle (59ml)

Use in combination with

Hemodent® or Traxodent®

for tissue displacement

and hemostasis.

• Carries an abundant quantity of hemostatic solution • Compacts under pressure, making it easier to pack • Will cut clean and not get entangled in a bur • 100 inches / 254 cm

Unique Knitted Microfiber

with Superior Absorbency

Knit-Pak+ is knitted impregnated

retraction cord manufactured from unique microfibers.

• High durability and retention properties

• Resists fraying and easily packs into sulcus

• Exact-dosage medicinal loading

(AlCl3 0.5mg± 0.1mg/inch) • 100 inches / 254 cm Size Color 9007551 000 Green 9007552 00 Brown 9007553 0 Purple 9007554 1 Blue 9007555 2 Orange 9007556 3 Yellow Size Color 9007560 000.0 Dark Green 9007561 000 Green 9007562 00 Brown 9007563 0 Purple 9007564 1 Blue 9007565 2 Orange

A cutting blade inside the cap automatically cuts the cord upon

closing firmly.

+

™ Impregnated Knitted Cord

(6)

15

30

_{SECOND CURE}

*

To a depth of 8mm!

*

Advanced Formula, Dual-Cure CompCore™

Provides exceptional performance and the enhanced light-curing properties save considerable time. If light-curing is not an option – allow CompCore™ AF to self-cure in 4.5 minutes intraorally!

Improved natural appearance

The greater translucency of the enhanced CompCore AF presents a more natural tooth appearance which minimizes the chance of shadows under ceramic crowns- yet provides good contrast and excellent radiopacity.

Outstanding handling for ease of use

CompCore AF Stack will stay put – even in difficult maxillary core build-ups, yet flows under pressure for excellent adaptation. Preps like dentin without ditching. Superior durability for peace of mind

CompCore AF composite core build-up material utilizes exclusive Hyperbranched Technology™18_{and nano-fillers for superior mechanical properties and long term}

clinical success - available in automix SyringeMix™ and cartridge dispensers.

(7)

2

† Final Set Time Shades

Depth of cure A3 White Blue

6mm 30 sec 30 sec 30 sec

8mm 30 sec 40 sec 60 sec

CompCore™ AF SyringeMix STACK: 9g Automix Syringes/Dual-Cure

3001512 SyringeMix STACK / Shade White 3001513 SyringeMix STACK / Shade A3 3001514 SyringeMix STACK / Shade Blue

Contains: two 9g automix syringes, 15 mix tips, 15 standard and 10 extra-fine intraoral tips.

CompCore™ AF STACK 50g Automix Cartridge Intro Kit

3001430 Shade White 3001431 Shade A3

Contains: 50g cartridge of CompCore AF Dual-Cure, 4ml bottles of IntegraBond™ and Auto-cure Activator, Type 25 applicator gun, 25 mix tips, 25 intraoral syringe tips, 10 ACCOR® matrices

Refill Kit

Contains: 50g cartridge of CompCore AF Dual-Cure,25 mix tips, 25 intraoral syringe tips, 10 ACCOR® matrices

CompCore™ AF

Twist STACK: Auto-Cure/Syringe Hand-Mix

Contains: 6g catalyst and base, mixing pads and 20 spatulas.

Accessories

3001418 SyringeMix Mix-Tips & Intraoral Tips (35 each)

3001468 SyringeMix Extra-Fine Intraoral Tips (50) 3001416 Applicator Gun Type-25

3001417 Cartridge Mix-Tips & Intraoral Tips (35 each)

9048081 ACCOR® Matrices (50 multi-sized core matrix forms)

1 & 3 2 4 5

2 3 4

1

Advanced Formula, Dual-Cure Composite

Core Build-up Material

33% Less Polymerization Shrinkage19

CompCore AF Leading Core Material

Diametral Tensile Compressive CompCore AF Leading Core Material

Over 20% Greater Diametral Tensile & Compressive Strengths19 Bonding Agent

(use only bonding agents compatible with dual-cure composites, such as IntegraBond™)

1 Clean and dry prepared tooth surface.

2 Apply 37% phosphoric acid to the cavo surface for 10 to 15 seconds. 3 Rinse and dry cavo surface, do not desiccate the tooth.

4 Apply first coat of IntegraBond™ on prepared cavo surface. Allow to sit for 15 seconds, and then air dry. Apply 2 to 3 more coats; without waiting, dry again after last application. 5 Light-cure for 20 seconds

Core Build-Up

1 Bleed syringe. Assemble intraoral tip to mix-tip, attach to syringe and bleed tip. 2 Place intraoral tip into the base of the prepared tooth and dispense.

Let material rise around the tip while withdrawing to eliminate air bubbles. 3 Light-cure for 30 seconds. If the core is larger than 8mm, light-cure for at least an additional 10 seconds.†

4 Check for complete hardness. The preparation can be finished immediately with a Two Striper Bur. Alternately, the core can be chemical-cured, final set-time is 4.5 minutes.

Physical Properties

Compressive Strength: 250 MPa

Radiopacity: 400% Al

Light-cure Setting Times

Working Time: 2.5 minutes at 72˚ (22˚C)

Chemical-cure Setting Times

Working Time: 2.5 minutes at 72˚ (22˚C)

Final set: 4.5 minutes at 98˚ (37˚C)

18. Evaluation of Hyperbranched Polymers Effect on Dental Composite Properties, Lizenboim,K., Dodiuk- Kenig, H., Eppelbaum, I, Shenkar College for Engineering and Design, Ramat-Gan, Israel.

(8)

1

9061216 Intro System

Contains: 100 Assorted Wedges and 60 Blue Cure-Thru® Premolar and Molar Matrix Bands 9061221 Small (100)

9061223 Medium (100) 9061225 Ultra-Thin (100)

Cure-Thru

®

Reflective Wedges

Clear, Anatomically-shaped Wedges

• Blue color increases the contrast between the matrix and tooth without compromising polymerization of the composite

• Thin, yet strong enough to pack against • Simplifies posterior composite placement 9061231 Premolar Bands (100)

9061233 Molar Bands (100)

Blue Cure-Thru

®

Matrix Bands

Transparent Contoured Matrices

0.075mm

Cure-Thru

®

Clear

Cervical Matrices

Transparent Pre-contoured

Matrix Forms

• Flexes to the exact contour of the tooth for dense restorations with excellent marginal integrity

• Compress restorative material as you light-cure • Helps eliminate air inhibited layer

• Reduces time to final polish

9061011 Assorted Box - Contains: 275 matrix forms, positioning instrument, gingival retraction instrument Available in boxes of 150 9061012 719CT 9061013 720CT 9061014 721CT 9061015 722CT 9061016 723CT 9061017 Anterior/Premolar 9061018 Molar/Universal

9061340 Positioning Instrument - double-ended, autoclavable

• Turns a three-handed procedure into a two-handed one • Light-cure Class III and IV restorations with ease

9061380 8mm (red) (100) 9061375 10mm (blue) (100)

9061370 Assorted (8 & 10mm) (75 each)

Stop Strip

Anterior Bands with Integrated Stopper

Unique integrated stopper secures the matrix band between adjacent teeth.

10mm wide 8mm wide Premolar Molar Actual Size 719 720 721 722 723 Anterior/ Molar/ Premolar Universal

Curved tip Soft moldable baseadapts band to tooth

Inner white core reflects up to 90% of light towards the restoration resulting in better contact Anatomical shape

Light-conducting plastic

(9)

2

Sycamore Wood Wedges

The Original Anatomically Carved

38% Etchant - MicroDose

®

Fast Acting, Silica-Free Dental/Enamel Etchant

15-20 second etch time

Each 0.2cc unit is sufficient for etching two to four teeth. Bright blue in color.

4009051 0.2cc MicroDose pipettes (50)

® MicroDose is not a registered trademark of Premier Dental Products Company.

Porcelain Etchant

9.6% Hydrofluoric Acid Gel

Yields superior retention

Each 0.2cc finger applicator unit is sufficient for etching two to four porcelain facings.

4009001 Porcelain Etchant - 22 units

Porcelain Silane

Advanced Silane Chemistry

Each 0.2cc finger applicator unit is sufficient for bonding two to four facings, crowns or inlays. A clear liquid.

4009020 Porcelain Silane - 18 units 4009025 Porcelain Bonding Kit - 18 packs

Contains: one unit each of Porcelain Etchant and Porcelain Silane

Eight color-coded sizes (400 count) 9061109 Mini (Light Blue) 9061106 UT - Ultra Thin (Orange) 9061100 13XT - Extra Thin (Neutral) 9061101 13T (Green)

9061102 13 (Yellow) 9061103 15 (Blue) 9061104 16 (Red) 9061105 17 (Neutral)

9061108 Assorted (UT, 13, 13T & 15)

Wood Wedge Organizer

9061115 Six-Compartment Organizer • Round tip easily passes over gingiva

• Concave sides conform matrix band to tooth’s anatomy • Square end is easily inserted and removed

3001422 37% Dentin/Enamel Etch Kit Contains: one 12g jumbo syringe, with luer lock adapter, ten empty 1.2ml syringes and 50 disposable applicator tips for the ten 1.2ml syringes

Premier

®

Etch

37% Phosphoric Acid

Dentin/Enamel Etch Gel

ACCOR

®

Multi-sized Matrices

for Core Build-up

Easy to use - Versatile - Disposable 9048081 Matrices (50)

ACCOR® is a registered trademark of ACCOR Inc.

“Most Highly Rated“***

Mini UT 13XT 13T 13 15 16 17

Number designates wedge length in mm (13=13mm)

Pre-contoured

Metal Bands

• Anatomical shape achieves better contact points • Ideal for large Class II restorations with

incremental curing technique

• Finished edges ensure patient comfort • 0.035mm thickness

9061070 Box of 30

(10)

1

NexTemp

®

The Next Generation in Temporary Cement

3001470 Bulk - 4 Automix Syringes (5ml each)

3001471 Standard - 1 Automix Syringe (5ml) & 10 Mix Tips 3001451 Automix Dual-barrel Syringe Tips (25)

• Firm Retention/Easy Removal -

4X greater retention than most zinc-oxide cements

• Eugenol-Free - Non-irritating to soft tissue. Will not inhibit permanent cementation

• Fluoride Release

• Potassium Nitrate - Known to reduce sensitivity and act as a sedative to the pulp

• Chlorhexidine - A proven anti-bacterial agent

• Resin-Matrix Formulation

Good marginal seal with no wash-out

• Two-Stage Curing - In approximately two minutes, initial gel-set stabilizes temporary, allowing easy removal of excess. Final set occurs one minute later.

• Automix Syringe - Saves application time; guarantees consistent mix

• Neutral Shade - Blends esthetically with temporary restoration/no show-through

Greater Retention,

Less Cement!

Just dispense a small bead

of cement around the

inside margin.

“Best Products of the Year“*

*An independent non-profit dental education and product testing foundation, December 2006 & 2007

†_{Final set time is determined intraorally. Ambient set times vary and are} not representative of clinical conditions.

Dry and isolate the

prepared tooth. Bleed the syringe. Mount a new automix dispens-ing tip and bleed the syringe again.

Seat the temporary and hold in place. In approxi-mately 2 minutes, excess cement reaches a distinct gel phase and can be removed safely.

Final set occurs between 4-5 minutes after seating of temporary restoration.†

2

Dispense a small bead of cement around the inside margin.

3

4

1

5

PERIOWISE® Use a PerioWise® Periodontal Probe for post-treatment periodontal evaluation.

Premier® NexTemp® Temporary

Cement is easy to use

(11)

2

Premier

®

Implant Cement

™

Unique Elastomeric Qualities

3001450 Implant Cement - Standard Pack

1-5ml Automix Syringe, 10 Mixing Tips and 1 Mixing Pad 3001455 Implant Cement - Value Pack

3-5ml Automix Syringes, 25 Mixing Tips 3001451 Automix Dual-barrel Syringe Tips (25)

“Outstanding Products“*

*An independent non-profit dental education and product testing foundation, December 2004 & 2005

The

world-wide

favorite!

Premier® Implant Cement™ is a tough elastomeric resin that flexes under force, absorbs shock and resists breaking down under daily occlusal stresses. The innovative formula creates a tight marginal seal and will not wash out.

• Secure Retention - Strength and durability of resin cements for long lasting hold

• Retrievable - Mechanical retention only - not chemical - allows future restoration removal for retreatment or adjustments

• No Fluoride - Non-fluoride formulation safe for all alloys including titanium. Tight marginal seal protects implant from potentially corrosive high fluoride environments.

• Easy to Use - No adhesives or primers. Package comes complete with automix syringe and mixtips.

Facial 204 PerioWise® UNC 12 9006120 (3-pack) 9006121 (6-pack) 9006122 (12-pack) Universal 137 UNC 12

Working Time 1.5 minutes at room temperature

Gel-phase 2-2.5 minutes at 98°F (37°C)

Set Time 4-5 minutes at 98°F (37°C) from the start of mix

Film Thickness 15 µm

Properties

10 Check the fit. Complete all

finishing procedures. Rinse and dry abutment and interior of restoration.

1

2

Bleed syringe. Mount new automix tip and then bleed the syringe again. This assures proper flow of base and catalyst.

3

Using a microbrush, place a thin film of cement along the inside wall of the cervical third, making sure to completely coat the margin with cement. You have 1.5 minutes of working time at room temperature.

Excess cement should be avoided. Too much cement can cause future restoration retrieval to be difficult to impossible.*

4a

4b

Final cement is 4 - 5 minutes, intraorally.

6

Firmly seat the crown and hold in place until initial set (gel phase) occurs in 2 - 2.5 minutes. Safely remove excess cement before final set. It is imperative to remove all excess cement.

5 Secure retention

and retrievability

in one unique step!

Premier® Implant Cement

™

is easy to use

*Any excess cement (regardless of chemical make-up or brand) that remains in the sulcus around an implant could lead to peri-mucositis, peri-implantitis or implant failure if not removed immediately.

Universal Implant Scaler

(Columbia 4L/4R) 9061401 (2-pack) 9061400 (5-pack)

NEW! 137 Implant Scaler

(Anterior) 9061421 (2-pack) 9061420 (5-pack)

Facial Implant Scaler

(Goldman-Fox 5) 9061402 (2-pack) 9061403 (5-pack)

NEW! 204 Implant Scaler

(Posterior) 9061423 (2-pack) 9061422 (5-pack)

Premier® Implant Scalers

are made

from graphite reinforced resin that will not scratch implant surfaces.

(12)

To schedule an in-office demonstration, call 888-670-6100. Order through your dealer. Visit www.premusa.com for current special offers and online product tutorials.

Please contact your dealer concerning product availability in your country.

Triple Tray

®

Proven Accurate in Over

90 Million Impressions

Thin, loose webbing will not distort 1006283 Wide Body Posterior - Box of 48 1006203 Posterior - Box of 48

1006213 Anterior - Box of 35 1006223 Quadrant - Box of 40 1006243 Sideless Posterior - Box of 48 1006253 Extended Quadrant - Box of 35 1006273 Three-Quarter Arch - Box of 35 1006233 Assorted - Box of 35

Contains 5 each of designs listed above

T-LOC

™

_{Triple Tray}

_®

Adhesive-free Dual-arch

Impression Trays

• Patented adhesive-free design • Easier handling

• Accurate bite

• Greater rigidity in posterior • Ensure accuracy and save time 1006204 Posterior - Box of 35 1006214 Anterior - Box of 28 1006274 Three-Quarter Arch - Box of 22

Premier® Dental Products Company • 1710 Romano Drive, Plymouth Meeting, PA 19462, USA

Phone 888-670-6100 • 610-239-6000 • Fax 610-239-6171 • www.premusa.com • E-mail: [email protected]

MDSS GmbH Schiffgraben 41 30175 Hannover, Germany

Wide Body Posterior Triple Tray

Repeat Winner 2003, 2004, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014 Repeat Winner - 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014 U.S. Patent #6,749,428

Spot-On™ Etch is a 37% high viscosity phosphoric etch gel for all your routine and selective-etch procedures. It’s designed with enhanced viscosity that will prevent it from dripping or slumping. Spot-On Etch easily flows through a small applicator tip, washes off readily and resists drying out.

Key benefits

• Ideal for routine etching and selective-etch procedures

• Blue color provides a strong contrast to enamel and dentin

• No slump formula

• Easy handling

• Rinses clean without leaving residue

NEW!

3001460 Spot-On™ Etch Bulk

One 12g jumbo filled syringe with luer lock adapter Ten 1.2ml empty syringes

Fifty 1.2ml disposable applicator tips

3001461 Spot-On™ Etch Intro

Five 1.2ml filled syringes

Twenty bent disposable applicator tips

Spot-On™_Etch

no-slump viscosity will stay put. Only etch the

areas you desire!

Spot-On

™

Etch

37% Phosphoric Etch Gel for Routine

and Selective “Spot-On” Etching

8610307 021646 Rev9 NKP15M Spot-On™ Etch clinical image courtesy of Shalom Mehler DMD, Teaneck , NJ.