• No results found

(config)# prompt, enter interface eth 0/1 to access the configuration parameters for

N/A
N/A
Protected

Academic year: 2020

Share "(config)# prompt, enter interface eth 0/1 to access the configuration parameters for"

Copied!
6
0
0

Loading.... (view fulltext now)

Full text

Loading

References

Related documents

In the spring of 1459, during a prolonged stay in Siena, Pope Pius II received a number of embassies from the rulers of Europe declaring obedience to the Apostolic

Unlike previous studies of consumer expenditures, I consider directly whether the "gender matters" approach of researchers working in developing countries is relevant

Step 4 Switch(config)# interface interface-id Specifies the interface on which you are configuring the location information, and enter interface configuration mode. Step

The purpose of this study was to investigate the patterns of visual behaviour and cogni- tive processes of experienced elementary teachers and pre-service teachers in an initial

The summary resource report prepared by North Atlantic is based on a 43-101 Compliant Resource Report prepared by M. Holter, Consulting Professional Engineer,

In this case, the configuration will be more efficient for the network administrator to block the traffic outbound on the eth 0/1 interface, instead of blocking it inbound on all

shannon edmondson GRAPHIC DESIGN DIGITAL PORTFOLIO print > introduction > bio > experience > portfolio > illustrator > layout > interactive > >

This Telnet password option is located in Setup menu option named “0 Server Configuration” and when you get to “Change telnet config password” enter Y and then enter a 4 digit