• No results found

Phase Noise Suppression in Spatially Division Multiplexing System Based on PCTWs

N/A
N/A
Protected

Academic year: 2020

Share "Phase Noise Suppression in Spatially Division Multiplexing System Based on PCTWs"

Copied!
10
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Figure 1. Basic principle of the PCTWs technique in SDM system.
Figure 2. The schematic diagram of a spatially multiplexed single channel system based on PCTWs technique
Figure 3. Influence of employing PCTWs technique on the phase noise in QPSK communication system
Figure 6 . The constellation diagrams of the received signal at transmission distance of 6720 km for (a) the traditional system, (b) the system using PCTWs technique

References

Related documents

The generic constructions allow versatile instantiations with our OKCN and AKCN schemes, for which we elaborate on evaluating and choosing the concrete parameters in order to achieve

The main purpose of this study was to describe possible scenarios of chlorine gas leakage from the drainage unit of wells and water resources and treatment plant in

approach to the short story collection; The six stories that comprise “It Takes a Lot of Lights”.. operate both individually, and as components of a larger unified work, linked

Discussion: The FEMME trial ’ s primary outcome is the quality of life women with symptomatic uterine fibroids experience two years after they have been treated with either UAE

In conclusion, this study showed that in a patient group with mainly moderate and severe COPD experience a loss of peripheral muscle strength and endurance, exercise capacity

Considering only women who received abortion care from public facility where there is shortage contraception supplies in study conducted in two of the region and failing to

It was decided that with the presence of such significant red flag signs that she should undergo advanced imaging, in this case an MRI, that revealed an underlying malignancy, which

In this test, the bending capacity of structural beams with (flat, trapezoidal, rectangular, sinusoidal and zigzag or triangular) web beams had been studied numerically..