• No results found

Optimization Of Clay-Bonded Graphite Crucible Using D-Optimal Design Under Mixture Methodology

N/A
N/A
Protected

Academic year: 2020

Share "Optimization Of Clay-Bonded Graphite Crucible Using D-Optimal Design Under Mixture Methodology"

Copied!
7
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Table 1  Component factor and their levels for D-optimal design
Table 2: Result of D-optimal design composition by percentage
Table 7,it was discovered that Run 8 with 70% clay,20% graphite, 10% MgO and 0% SiC has the highest shrinkage value of 2.97% while Run 13 with the minimum value of
Figure 3  Response Surface Plots Apparent Porosity, Firing shrinkage and Bulk density
+2

References

Related documents

Various domestic economic factors including money supply, industrial activities, inflation, Islamic interbank rate and international issues (e.g., real effective exchange rate

• “even one tiny, little thing can block [a program’s] adoption… [widely-used and commercially accepted software] may lack something required by government policy, such as

In [7], a design methodology was introduced, consisting of a static complementary logic, where the configurable polarity of ambipolar CNTFETs is exploited to produce logic gates

child, measured by 2 items (α = .75; e.g., I feel teachers are invested in the success of my child, I feel my child is getting the best experience he/she can from teachers),

The width (in mm) of the erythema induced by IFN-β1a at its injection site was evaluated over its maximum diameter at 1 month, and after 6 and 12 months of PEA or placebo.. The

The Method of Least Squares is a procedure to determine the best fit line to data; the proof uses simple calculus and linear algebra.. For example, the force of a spring

The cross-sectional study design will be used in finding out the most affected occupations among the sandwich generation of women flood disaster survivors where the relationship

A scope and sequence chart has been developed for the science program, and guides are available to help the teacher in develop ing various units of work