Soal-soal MTCNA REAL _Kegiatan Gw

apa ajah kegiatan gw

Kegiatan gw

Soal‐soal MTCNA REAL

Setelah pelatihan 4 hari dengan pusing‐pusingan akhirnya lulus MTCNA ini penampakan SOAL REAL

1. Choose correct statements for MikroTik proxy.

A. Controls domains or servers which are allowed to cache by Proxy B. To deny access to a specific website, caching should be enabled C. Destination NAT rule is required to utilize transparent proxy facility D. Can deny access to a specific domains or servers, but not specific web pages 2. What can be used as ’target‐address’ in the simple queue?

A. server’s address B. client’s address C. client’s MAC address D. address list name

3. A MikoTik PPPoE Server can be used only within a broadcast domain, that is, users can not run PPPoE protocol with a server if there is a router between the customer and that PPPoE server.

4. What is the minimal possible wireless configuration to create an Access Point? A. ssid B. DFS mode C. radio name D. scan‐list E. band F. WDS G. frequency H. mode

5. What is marked by connection‐state=established matcher? A. Packet begins a new TCP connection

B. Packet does not correspond to any known connection C. Packet is related to, but not part of an existing connection

D. Packet belongs to an existing connection,for example a reply packet or a packet which belongs to already replied connection

6. To be able to do NAT the connection tracking does not need to be enabled.  

7. You want to use PCQ and allow 256k maximum download and upload for each client. Choose correct argument values for the required queue.

A. kind=pcq pcq‐limit=256000 pcq‐classifier=dst‐address B. kind=pcq pcq‐limit=1256000 pcq‐classifier=dst‐address C. kind=pcq pcq‐limit=5000000 pcq‐classifier=dst‐address D. kind=pcq pcq‐limit=256000 pcq‐classifier=src‐address E. kind=pcq pcq‐limit=5000000 pcq‐classifier=src‐address 8. There are two routes in the routing table:

0 dst‐addr=10.1.1.0/24 gateway=5.5.5.5 Yang Mampir

2 5 3 6 2

►  Maret (2)

Arsip Blog

Sofyan Adi Irawan Ikuti 193 Lihat profil lengkapku

Mengenai Saya

1 dst‐addr=10.1.1.4/30 gateway=5.6.6.6

Which gateway will be used to get to the IP address 10.1.1.6?

A. both ‐ half of the traffic will be routed through one gateway, half through the other B. the required route is not in the routing table

C. 5.5.5.5 D. 5.6.6.6

9. The first two rules in the forward chain of the filter table are:

/ip firewall filter add chain=forward connection‐state=established action=accept /ip firewall filter add chain=forward connection‐state=invalid action=drop Connection‐state=related packets are not filtered by the rules above.

10. If a packet comes to a router and starts a new, previously unseen connection, which connection state would be applied to it?

A. established B. unknown C. new D. invalid

E. no connection state would be applied to such packet 11. How many usable IP addresses are there in a 20‐bit subnet?

A. 2047 B. 4094 C. 2048 D. 2046 E. 4096

12. Hotspot ip‐binding is used to allow access to Internet web servers specifing the IP address of the web server instead of the URL.

13. Netinstall can be used to

A. Keep configuration, but reset a lost admin password B. Install different software version (upgrade or downgrade) C. Install package for different hardware architecture D. Reinstall software without losing licence

14. When viewing the routes in Winbox, some routes will show "DAC" in the first column. These flags mean:

A. Dynamic,Available,Created B. Dynamic,Active,Console C. Direct,Available,Connected D. Dynamic,Active,Connected

15. You have a wireless interface with SSID="WAN1"mode="ap‐bridge" and a VirtualAP with SSID="VAP1" on the router. Is it possible to use nstreme protocol?

A. No, Nstreme can not be used on wireless interface if a VirtualAP is on it. B. Yes, but Nstreme can be used only for SSID=VAP1.

C. Yes, but Nstreme can be used only for SSID=WLAN1. D. Yes, Nstreme can be used for both SSIDs

16. /store allows you to save to external disk A. web‐proxy data

B. system configuration C. dude data

D. User‐Manager data

17. You wish to secure your RouterOS system. You do not want the RouterOS to be discoverable using MNDP or CDP locally. You also want to deny management via the MAC addresses on all interfaces. Select the correct actions to accomplish this.

A. Remove/Disable the Interfaces B. Add a Deny All input firewall rule

C. Place a proper input firewall rule to block mac discovery D. Place a proper forward firewall rule to block mac discovery E. Remove/Disable all discovery interfaces

F. Remove/Disable all interfaces under mac‐server telnet G. Remove/Disable all interfaces under mac‐Server winbox

18. You need to redirect a browser page from a search of "xxx" in google to another website such as www.mikrotik.com

Choose correct proxy access rule.

A. /ip proxy access add dst‐host=*.google.* path=*xxx* action=deny redirect‐ to=www.mikrotik.com

B. /ip proxy access add path=*xxx* action=allow redirect‐to=www.mikrotik.com C. /ip proxy access add dst‐host=*xxx* action=allow redirect‐to=www.mikrotik.com D. /ip proxy access add dst‐host=*xxx* action=deny redirect‐to=www.mikrotik.com 19. Is it possible to have PPTP Client and PPTP server on one MikroTik router at the same time?

20. In which situations can Netinstall NOT be used to install a RouterBOARD? A. The router does not have an operating system

B. The router is connected only to a secondary Ethernet port C. You do not know the password of the router

D. The router is connected only to a wireless network 21. Check the allowed input formats for wireless scan‐list.

A. 5500 5700 B. 5500 ‐ 5700 C. 5500/5700 D. 5500,5700 E. 5500‐5700

22. Collisions are possible in full‐duplex Ethernet networks  

23. In case when router login password is lost, it is necessary to reinstall RouterOS or use hardware reset funcion.

24. You would like to allow multiple logins with one user name on a HotSpot server. How should this be configured?

A. Set "Shared Users" option at /ip hotspot B. It's not possible

C. Set "only‐one=no' at /ip hotspot

D. Set "Shared Users" option at /ip hotspot user profile 25. What wireless modes can be used in a WDS setup?

A. station‐wds B. ap‐bridge C. nstreme‐dual‐slave D. bridge

E. station

setelah jawab n habis waktu hasil nilai 65 LULUS bro selamat mencoba dah

Update soal temen sebelah

1. Which rule is used to block SMTP protocol from Lan interface for clients? A. /ip firewall filter add chain=forward protocol=tcpdst­port=25 action=drop in­interface=Lan B. /ip firewall filter add chain=input protocol=tcpdst­port=25 action=drop in­interface=Lan C. /ip firewall filter add chain=forward dst­port=25 action=drop in­interface=Lan D. /ip firewall filter add chain=output protocol=tcpdst­port=25 action=drop in­interface=Lan 2. The highest queue priority is

A. 1 B. 16 C. 8 D. 256 3. A client uses a RouterBOARD1000.The clock is configured in '/system clock'. The clock resets to default after each reboot. Select the best solution for the problem. A. Configure '/system ntp server' and set a valid and reachable NTP client address. B. Configure '/system ntp client' and set a valid and reachable NTP server address. C. Write a script in '/system script' to set the clock D. Open the router and ensure the CMOS battery is fine. 4. When backing up your router by using the 'Export' command, the following happens: A. You are requested to give the export file a name B. Winbox usernames and passwords are backed up C. The Export file can be edited with a standard text editor after its creation 5. Select which of the following are 'Public IP addresses': A. 10.110.50.37 B. 172.28.73.21 C. 192.168.0.1 D. 172.168.254.2 E. 11.63.72.21 6. Define a routing loop (choose the most precise description) A. situation where the TTL of the packet expires B. situation where the packet is routed through the same router twice C. Situation where the packet does not reach it\'s destination D. situation where the packet is routed through the same sequence of routers until the TTL expires 7. Is it possible to have PPTP Client and PPTP server on one MikroTik router at the same time?   8. What can you do with Netinstall? A. Reinstall RouterOS B. Install Linux C. Reset password in RouterOS D. Add configuration to RouterOS 9. The basic unit of a physical network (OSI Layer 1) is the: A. Byte B. Header C. Bit D. Frame 10. Which of the following would prevent unknown clients from connecting to your AP? Choose the BEST answer. A. Uncheck "Default Authenticate" in the wireless card configuration, and add each known client's MAC address to your access­list configuration ensuring that you enable "authenticate" in the entry B. Add each known client's MAC address to your access­list configuration is the only step needed C. Configure the radius server under "/radius" D. Check the "Do not permit unknown client" box in the wireless configuration E. Uncheck "Default Authenticate" in the wireless card configuration, and add each known client's MAC address to your connect­list configuration 11. You want to share the same user and password for different computers. Which menu is used for configuration? A. /ip hotspot walled­garden B. /ip hotspot user profile C. /ip hotspot profile D. /ip hotspot ip­binding 12. You can not use OSPF and RIP routing protocols simultaneously on the RouterOS.  

13. When adding a user to your local ppp secrets/ppp profiles database, it is possible to A. Allow/deny use of more than one login by this user B. Set max values for total transferred bytes (up­ and download) C. Allow login by pppoe and pptp, but deny login by l2tp D. Deny services (like telnet) only for this user or for one group of users E. Allow only pppoe login 14. What is true about Bandwidth Test Tool? (select all that apply) A. Only work on MikroTik Router OS B. Can be downloaded on default router webpage C. Tests throughput between two MikroTik devices D. Can be used to monitor throughput to a remote device 15. Using wireless connect­list it’s possible to prioritize connection to one Access Point over another Access Point by changing the order of the entries.   16. Action=redirect can be used in NAT chain src­nat A. true B. false 17. You want to use PCQ and allow 256k maximum download and upload for each client. Choose correct argument values for the required queue. A. kind=pcqpcq­limit=256000 pcq­classifier=dst­address B. kind=pcqpcq­limit=256000 pcq­classifier=src­address C. kind=pcqpcq­limit=5000000 pcq­classifier=dst­address D. kind=pcqpcq­limit=1256000 pcq­classifier=dst­address E. kind=pcqpcq­limit=5000000 pcq­classifier=src­address 18. Mark all packages required for PPPoE server on MikroTikRouterOS A. synchronous B. radius C. user­manager D. ppp E. system 19. It is impossible to disable user "admin" at the menu "/user"   20. It is required to make a web server on a private LAN visible on the Public Internet. Only the web server port should be visible to the public. Which of the following configuration steps must be met. (select all that apply) A. A route between the NAT Router and the webserver must exist B. Connection Tracking must be enabled on NAT router C. LAN address of the webserver should be routable on the internet D. in ip firewall NAT there should be a dst­nat between the public ip of the router and the private ip of the webserver E. Public IP address of the webserver must be installed on the NAT Router 21. A backup file from a MikroTik router is stored in plain text format   22. What configuration is added by /ip hotspot setup command? (select all that apply) A. /queue tree B. /ip hotspot walled­garden C. /ip hotspot user D. /ip service E. /ipdhcp­server 23. /interface wireless access­list is used for A. Shows a list of Client's MAC Address that are already registered at AP B. Handles a list of Client's MAC Address to permit/deny connection to AP C. Contains the security profiles settings D. Authenticate Hotspot users 24. What action should be used to inform source that packets reached destination, but was not

accepted ? A. action=accept B. action=drop C. action=tarpit D. action=reject 25. In which order are the entries in Access List and Connect List processed? A. By Signal Strength Range B. In sequence order C. In a random order D. By interface name Update lg

1. You want to skip HotSpot (authorization, accounting, etc.) for a specific host. What should you use?

A. /ip hotspot walled‐garden ip B. /ip hotspot walled‐garden C. /ip address

D. /ip hotspot ip‐binding

2. Two mangle rules defining different mangle marks for the same traffic type, will make it have both mangle marks.

3. Which firewall chain should you use to filter ICMP packets from the router itself? A. input

B. forward C. output D. postrouting

4. When adding a static route, you must always ensure that you add both the gateway and the interface. 

5. What does this simple queue do (check the image)? A. Queue limits host 192.168.1.10 download data rate to one megabit per second.

B. Queue guarantees download data rate of one megabit per second for host 192.168.1.10

C. Queue guarantees upload data rate of one megabit per second for host 192.168.1.10

D. Queue limits host 192.168.1.10 upload data rate to one megabit per second.

6. Router A and B are both running as PPPoE servers on different broadcast domains of your network. Is it possible to set Router A to use "/ppp secret" accounts from Router B to authenticate PPPoE customers ?

7. Is it possible for a client to get an IP address but no gateway after a successful DHCP request?  

8. A network ready device is directly connected to a MikroTik RouterBOARD 750 with a correct U.T.P. RJ45 functioning cable. The device is configured with an IPv4 address of 192.168.100.70 using a subnet mask of 255.255.255.252. What will be a valid IPv4 address for the RouterBOARD 750 for a successful connection to the device?

A. 192.168.100.68/255.255.255.252 B. 192.168.100.69/255.255.255.252 C. 192.168.100.71/255.255.255.252 D. 192.168.100.70/255.255.255.252

9. The gateway router is configured with a transparent proxy with the following parameters: /ip proxy access add dst‐host=www.mikrotik.com action=allow

When the user is opening www.mt.lv, what is shown in the browser? A. www.mt.lv

B. forum.mikrotik.com C. www.mikrotik.com

10. Simple Queue number 0 defines 2M for upload and download for target IP 10.10.0.33. Simple Queue number 1 defines 4M for upload and download for target IP 10.10.0.33. Client 10.10.0.33 is be able to obtain

A. 4M upload/download B. 6M upload/download C. 0M upload/download D. 2M upload/download 11. What can you do with Netinstall?

A. Reinstall RouterOS

B. Add configuration to RouterOS C. Install Linux

D. Reset password in RouterOS

12. Hotspot can be configured on a Virtual Access point interface  

13. Wireless clients (mode=station) will work properly if bridged to ethernet  

14. Collisions are possible in full‐duplex Ethernet networks  

15. Where should you upload new MikroTik RouterOS version packages for upgrading router? A. Any directory in /files

B. System Backup menu

C. FTP root directory or /files directory of the router

D. System Package menu

16. Which wireless mode allows you to connect to any standard AP (not only MikroTik) and to be able to bridge this wireless interface to an Ethernet?

A. station B. station‐wds C. station‐pseudobridge D. bridge

17. What is marked by connection‐state=established matcher? A. Packet begins a new TCP connection

B. Packet belongs to an existing connection,for example a reply packet or a packet which belongs to already replied connection

C. Packet is related to, but not part of an existing connection

D. Packet does not correspond to any known connection

18. When sending out an ARP request, an IP host is expecting what kind of address for an answer? A. VLAN ID

B. MAC Address C. IP address D. 802.11g

19. Is it possible to create a custom firewall chain and use it in both input and forward chains at the same time?

20. The following image shows a RouterOS Wireless Access List configuration.   

to this AP?

A. No client is able to connect to the Wireless Access Point.

B. 00:0C:42:61:6C:90 client will connect to wlan1 C. 00:0C:42:31:38:A2 will connect to wlan1 when the signal strength is greater than ‐60

D. Client with mac‐address 00:0C:42:31:38:A2 will connect to wlan1

21. HotSpot is required on the interfaces ether2, ether3, wlan1 (in ap‐bridge mode). These interfaces are bridged in the bridge1 interface.

Which interface should the HotSpot server be configured on? A. On wlan1 interface

B. On bridge1 interface C. On ether3 interface D. On ether2 interface 22. Mark correct statements.

A. Export files are not editable B. Backup files are not editable C. Backup files are editable

23. Which is the default port of IP‐Winbox? A. TCP 8192

B. TCP 8291 C. TCP 80 D. UDP 8291

24. What kind of users are listed in the Secrets window of the PPP menu? A. pptp users B. winbox users C. wireless users D. l2tp users E. pppoe users F. hotspot users

25. For static routing functionality, additionally to the RouterOS system package, you will also need the following software package:

A. routing B. dhcp C. none

D. advanced‐tools lg dan lg

1.You want to skip HotSpot (authorization,

accounting, etc.) for a specific host. What should you use?

A. /ip hotspot ip‐binding B. /ip hotspot walled‐garden C. /ip hotspot walled‐garden ip D. /ip address

2. What kind of users are listed in the "/user" menu? A. hotspot users

B. wireless users C. router users D. pptp users

3. Is action=masquerade allowed in chain=dstnat? A. yes

B. no

C. yes, but it works only for incoming connections D. yes, but only if dst‐addr is specified

4. MikroTik RouterOS is sending logs to an external syslog server. Which protocol and port is

used by RouterOS for sending logs (by default)? A. UDP 514

B. UDP 21 C. TCP 110 D. UDP 113

5. When "Cache On Disk" is not checked under the web proxy settings, where does the data get stored?

A. RAM (Memory) B. System Disk C. USB Disk

D. It does not get stored 6. Which options are correct ?

A. DST‐NAT to define new destination address in our local network for incoming packets

B. SRC‐NAT to prevent local network clients access to outside

C. SRC‐NAT to prevent access from outside to our local network clients

D. DST‐NAT to redirect all packets to router itself 7. RouterOS DHCP server is able to send any DHCP options (specified in RFCs) to DHCP

clients  

8. Which of the following is NOT a valid MAC Address? A. 88:0C:00:99:5F:EF

B. EA:BA:AA:EE:FF:CB C. 80:GF:AA:67:13:5D D. 13:16:86:53:89:43 E. 95:B5:DD:EE:78:8A

9. Hotspot ip‐binding is used to allow access to Internet web servers specifing the IP address of the web server instead of the URL.

10. You have a wireless interface with

SSID="WAN1"mode="ap‐bridge" and a VirtualAP with SSID="VAP1" on the router. Is it possible to use nstreme protocol?

A. Yes, but Nstreme can be used only for SSID=WLAN1.

B. Yes, but Nstreme can be used only for SSID=VAP1. C. Yes, Nstreme can be used for both SSIDs

D. No, Nstreme can not be used on wireless interface if a VirtualAP is on it.

11. Possible actions of ip firewall filter are: A. tarp B. add‐to‐list C. bounce D. tarpit E. log F. accept

12. For static routing functionality, additionally to the RouterOS system package, you will also need the following software package: A. advanced‐tools

B. dhcp C. routing D. none

13. You have a router with configuration ‐ Public IP :202.168.125.45/24 ‐ Default gateway:202.168.125.1

‐ DNS server: 248.115.148.136, 248.115.148.137 ‐ Local IP: 192.168.2.1/24

Mark the correct configuration on client PC to access to the Internet A. IP:192.168.2.2/24 gateway:202.168.125.45 B. IP:192.168.2.115/24 gateway: 192.168.2.1 C. IP:192.168.0.1/24 gateway:192.168.2.1 D. IP:192.168.1.223/24 gateway:248.115.148.136 E. IP:192.168.2.253/24 gateway:202.168.0.1 14. What letters appear next to a route, which is automatically created by RouterOS when user adds a valid address to an active interface? A. I

C. D D. A E. C

15. There is an HTTP server 10.0.0.1 in your private network. You have made a DST‐NAT rule

that sends all HTTP traffic received on your router's address 80.232.50.100 to this server. If you

make a firewall rule on the router to disallow address 159.148.20.30 to communicate with the

server, how would you identify this communication in this rule? A. src‐address=80.232.50.100 dst‐address=10.0.0.1 B. src‐address=159.148.20.30 dst‐ address=80.232.50.100 C. src‐address=159.148.20.30 dst‐address=10.0.0.1 D. src‐address=80.232.50.100 dst‐ address=159.148.20.30

16. Choose all valid hosts address range for subnet 15.242.55.62/27

A. 15.242.55.32‐15.242.55.63 B. 15.242.55.33‐15.242.55.63 C. 15.242.55.31‐15.242.55.62 D. 15.242.55.33‐15.242.55.62

17. Mark the queue types that are available in RouterOS

A. SFQ – Stochastic Fairness Queuing

B. FIFO ‐ First In First Out (for Bytes or for Packets) C. RED – Random Early Detect (or Drop)

D. DRR ‐ Deficit Round Robin E. PCQ – Per Connection Queuing F. LIFO ‐ Last In First Out

18. /store allows you to save to external disk A. User‐Manager data

B. system configuration C. web‐proxy data D. dude data

19. Is it possible to limit how many clients are able to connect to an access point?

A. Yes

B. No it's not possible at all C. Yes, but only with access‐lists

20. Is it possible to have PPTP Client and PPTP server on one MikroTik router at the same time?

21. You want to use PCQ and allow 256k maximum download and upload for each client.

Choose correct argument values for the required queue.

A. kind=pcq pcq‐limit=5000000 pcq‐classifier=src‐ address

B. kind=pcq pcq‐limit=256000 pcq‐classifier=src‐ address

C. kind=pcq pcq‐limit=5000000 pcq‐classifier=dst‐ address

D. kind=pcq pcq‐limit=256000 pcq‐classifier=dst‐ address

E. kind=pcq pcq‐limit=1256000 pcq‐classifier=dst‐ address

22. Can you manually add drivers to RouterOS in case your PCI Ethernet card is not recognized,

and you suspect it is a driver issue? A. No

B. Yes

23. A station can connect to AP if they both use different country regulation settings, but the frequency chosen is allowed in both countries

24. Router A and B are both running as PPPoE servers on different broadcast domains of

your network. Is it possible to set Router A to use "/ppp secret" accounts from Router B to

authenticate PPPoE customers ?  

25. You want to create an access point for several laptop (non‐RouterOS) clients. Select all options you can set on the MikroTik wireless interface:

A. mode=ap‐bridge B. Nstreme to optimize link C. mode=bridge

D. Security profile for WPA encryption 1. The highest queue priority 1.The highest queue priority is A. 256

C. 16 D. 1

2. The gateway router is configured with a transparent proxy with the following parameters: /ip proxy access add dst‐host=www.mikrotik.com action=allow

/ip proxy access add dst‐host=www.mt.lv action=deny redirect‐to=forum.mikrotik.com

When the user is opening www.mt.lv, what is shown in the browser?

A. www.mikrotik.com B. forum.mikrotik.com C. www.mt.lv

3. If a packet comes to a router and starts a new, previously unseen connection, which

connection state would be applied to it? A. established

B. new

C. no connection state would be applied to such packet

D. unknown E. invalid

4. Can you manually add drivers to RouterOS in case your PCI Ethernet card is not recognized,

and you suspect it is a driver issue? A. No

B. Yes

5. It it possible to use the MikroTik Nstreme protocol with Windows wireless clients, if they

install a special driver that can be downloaded from the MikroTik webpage?

6. Collisions are possible in full‐duplex Ethernet networks

7. Making use of a narrower channel width such as 10MHz or 5MHz will increase your wireless link speed.

8. It is necessary to configure a local DNS server to be able to give out a DNS setting to clients

via DHCP server.  

route is: A. 30 B. 1 C. 255 D. 10

10. For static routing functionality, additionally to the RouterOS system package, you will also need the following software package: A. dhcp

B. routing C. advanced‐tools D. none

11. You can control bandwidth of a client connected to AP with the resource / interface wireless access‐list ( assume the client uses MikroTik RouterOS).

12. Is it possible to have PPTP Client and PPTP server on one MikroTik router at the same time?

13. Router A and B are both running as PPPoE servers on different broadcast domains of

your network. Is it possible to set Router A to use "/ppp secret" accounts from Router B to

authenticate PPPoE customers ?  

14. Is it possible that the same IP address is included in multiple address lists and still be used by these multiple address lists?

15. Select valid MAC‐address A. 00:00:5E:80:EE:B0 B. 192.168.0.0/16

C. AEC8:21F1:AA44:54FF:1111:DDAE:0212:1201 D. G2:60:CF:21:99:H0

16. What can be used as ’target‐address’ in the simple queue?

A. address list name B. client’s address C. server’s address D. client’s MAC address

17. Using wireless connect‐list it’s possible to prioritize connection to one Access Point over

another Access Point by changing the order of the entries.

18. What is marked by connection‐state=established matcher?

A. Packet begins a new TCP connection

B. Packet is related to, but not part of an existing connection

C. Packet does not correspond to any known connection

D. Packet belongs to an existing connection,for example a reply packet or a packet which belongs to already replied connection 19. MikroTik proxy features are: A. SMTP caching

B. DNS name filtering C. FTP caching D. POP3 caching E. HTTP caching

20. What is possible with Netinstall? A. MikroTik RouterOS configuration reset B. MikroTik RouterOS reinstall

C. MikroTik RouterOS password reset with saving router's configuration

21. Choose the best option to offer hotspot access to a known wireless client without HotSpot

authentication

A. /ip hotspot ip‐binding B. /ip firewall mangle

C. place Client registered MAC address in access list D. /ip hotspot walled garden

22. It is required to make a web server on a private LAN visible on the Public Internet. Only the

web server port should be visible to the public. Which of the following configuration steps must

be met. (select all that apply)

A. A route between the NAT Router and the webserver must exist

B. Connection Tracking must be enabled on NAT router

C. Public IP address of the webserver must be installed on the NAT Router

D. LAN address of the webserver should be routable on the internet

Diposkan oleh Sofyan Adi Irawan di 17.39 between the public ip of the router and the private ip of the webserver

23. Configuring HotSpot is possible on MikroTik RouterOS only with a wireless interface. 24. What can you do with Netinstall? A. Reset password in RouterOS B. Install Linux

C. Add configuration to RouterOS D. Reinstall RouterOS

25. A routing table has following entries: 0 dst‐address=10.0.0.0/24 gateway=10.1.5.126 1 dst‐address=10.1.5.0/24 gateway=10.1.1.1 2 dst‐address=10.1.0.0/24 gateway=25.1.1.1 3 dst‐address=10.1.5.0/25 gateway=10.1.1.2 Which gateway will be used for a packet with destination address 10.1.5.126?

A. 25.1.1.1 B. 10.1.1.1 C. 10.1.5.126 D. 10.1.1.2

+2   Rekomendasikan ini di Google

5 komentar:

Babak Pourali Minggu, 29 September 2013 19.46.00 WIB help

Balas

Babak Pourali Minggu, 29 September 2013 19.50.00 WIB

Balas

Komentar ini telah dihapus oleh administrator blog.

Luvs_Bunnie Selasa, 28 Januari 2014 23.52.00 WIB ada jawabannya engga yah?

kalo ada boleh minta engga yah? makasih :)

Balas

Sofyan Adi Irawan Rabu, 05 Februari 2014 14.46.00 WIB semua ada di http://wiki.mikrotik.com/wiki/Main_Page Balas

Posting Lebih Baru

Beranda

Posting Lama

  Beri tahu saya

Keluar

ƒ•—ƒ‘‡–ƒ”†ƒŜŜŜ

Beri komentar sebagai:  Unknown (Google)

Publikasikan   Pratinjau

wira hasan Jumat, 29 Mei 2015 10.43.00 WIB semau ada digoogle

Balas