Dynamics GP Year End Closing Processes

(1)

Dynamics GP Year End Closing Processes

FOLLOWING ARE THE COMBINED STEPS FROM THE MICROSOFT

DYNAMICS GP YEAR END CLOSING PROCEDURES.

WHEN TO CLOSE AND THE ORDER FOR CLOSING MODULES

(1) Inventory – Fiscal

(2) Receivables – Fiscal/Calendar

(3) Payables – Fiscal/Calendar

(4) Fixed Assets – Fiscal

(5) Analytical Accounting – Fiscal

(6) General Ledger – Fiscal

(2)

Summary steps for Inventory Year End Closing

1. Post all transactions for the year.

2. Reconcile inventory quantities.

3. Complete a physical inventory count, and then post any adjustments. 4. Print additional reports.

5. Make a backup. 6. Close the year.

7. Close the fiscal periods for the Inventory series (optional). 8. Make a final backup.

Detailed steps

1. Post all transactions for the year.

Make sure that all Invoicing transactions, Sales Order Processing transactions, and Inventory transactions for the current year have been entered and then posted before you close the year. This is true so that historical information is accurate for the year you are closing, and year-to-date amounts are accurately stated for the new year. If you want to enter future-period transactions before closing the year, create a new batch that has new transactions. However, do not post the batch until after the year has been closed.

2. Reconcile inventory quantities.

Reconcile quantities for all items by using the Reconcile Inventory Quantities window to make sure that your Inventory Control data has not become damaged during the year. To open the Reconcile Inventory Quantities window, follow this step:

 In Microsoft Dynamics GP, point to Tools on the Microsoft Dynamics GP menu, point to Utilities, point to Inventory, and then click Reconcile.

If any differences are found during the reconcile process, the quantities will be adjusted. If adjustments are made, they will be reflected on the Reconcile Report. Additionally, any serial numbers and lot numbers that were added for the adjusted items are included. If you want to change these serial numbers and lot numbers, you can use the Item Transaction Entry window. Enter decrease adjustment transactions to remove the existing serial numbers and the existing lot numbers. Then, enter increase adjustment transactions to enter the correct serial numbers and the correct lot numbers. To open the Item Transaction Entry window, point to Inventory on the Transactions menu, and then click Transaction Entry.

3. Complete a physical inventory count, and then post any adjustments.

a. Use the Stock Calendar Maintenance window to set up and then maintain information about when stock counts can be performed and about which days will be counted when the system calculates suggested dates for the next stock count for a specific item-site combination. To open the Stock Calendar Maintenance window, follow this step:

 In Microsoft Dynamics GP, point to Tools on the Microsoft Dynamics GP menu, point to Setup, point to Inventory, and then click Stock Calendar.

b. The Stock Count Cycle Assignment window can be used if you want to assign one stock count frequency to many items. To open the Stock Count Cycle Assignment window, point to Inventory on the Cards menu, and then click Count Cycle Assignment.

(3)

d. Use the Stock Count Entry window to enter information about the results of your stock counts. When you process a stock count, variance transactions are created. If the Autopost Stock Count Variances check box is selected, the transactions will also be posted. To open the Stock Count Entry window, point

to Inventory on the Transactions menu, and then click Stock Count Entry.

Instead of following step 3, you can manually create your adjusting entries. To do this, print a Physical Inventory Checklist by using the Inventory Activity Reports window, and then perform a physical count of your Inventory Items to verify that quantity on hand amounts are accurate for all Items. To open the Inventory Activity Reports window, point to Inventory on the Reports menu, and then click Activity.

If there are any differences, enter the necessary adjustments in the Item Transaction Entry window, and then post the transactions. To open the Item Transaction Entry window, point to Inventory on the Transactions menu, and then click Transaction Entry.

4. Print additional reports.

Print any additional reports that you will need for planning or for your permanent records. The suggested reports are as follows:

 Stock Status Report

 Purchase Receipts Report

 Turnover Report

 Transaction History Report

 Serial Number List

 Lot Number List

To access the Reports palette, point to Inventory on the Reports menu. Use selections from the Inventory Reports palette to print these reports. If you plan to remove sold purchase receipts during the year-end closing process, we recommend that you print the Purchase Receipts Report to review the receipts that will be removed.

5. Make a backup.

Make a backup of all company data. This is true so that you will be able to recover quickly should a power fluctuation or other problem occur during the year-end closing procedure.

6. Close the year.

Closing a year performs the following tasks:

 Transfers all summarized current-year quantity (cost and sales amounts) to transaction history for the Items for which you have been keeping summarized sales history.

 Updates the amount in the item's Beginning Quantity field to the Quantity on Hand field at each site. Certain reports, such as the Turnover Report, use the amount in the Beginning Quantity field for report calculations.

 Zeros the Quantity Sold field in Item Quantities Maintenance window for each site.

 Removes purchase receipts and cost change history for items that have been completely sold.

 Removes any discontinued items from the Item records that have been completely sold.

 Removes any lot attributes from the records of lot numbered items if they have been completely sold.

 Updates the standard cost of each item to the current cost if you use either the FIFO periodic method or the LIFO periodic valuation method.

 Uses the Inventory Year-End Closing window to close the year. The following options are available:

 Remove discontinued items

(4)

Processing report and inquiries will still be able to display information about these discontinued items. However, you will be unable to perform a lookup on the Item Number because it has been removed from the Item Master table. If you want to print a report or inquire on the discontinued Item, you must include the item within the Item Number range.

Note If you select this option, you will remove the discontinued items. Additionally, you will remove all inventory history for the items. You will be unable to drill back on the inventory history for these items.

 Remove sold receipts

If you click to select the Sold Receipts check box, all sold receipts whose quantity received amounts and quantity sold amounts are equal will be removed. This is an optional step, and it may not be a procedure that is performed every year-end. These values may help when items are returned through Invoicing. Therefore, you may not want to remove the purchase receipts from the file.

In Microsoft Dynamics GP, remove: Sold Receipts and Cost Change History Prior To. Click to select the Sold Receipts and Cost Change History Prior To check box to remove all sold purchase receipts and historical cost changes for items that use Average Perpetual, Last In, First Out (LIFO) Perpetual, or the First In, First Out (FIFO) Periodic valuation method, and then you enter a date. The sold receipts, quantity sold details, and historical cost changes with dates that come before the date that you entered will be removed.

 Remove sold lot attributes

If you click to select the Sold Lot Attributes check box, values for completely sold lot numbers will be removed. For example, you can remove the value red for the lot attribute Color if you have sold all lot numbered items that have been assigned the value red.

 Update an item's standard cost

If you click to select the Item's Standard Cost check box, the Standard Cost for any items that have been assigned the FIFO periodic valuation method or the LIFO periodic valuation method will be adjusted

automatically to reflect each item's current cost or the amount you most recently paid for the item. If you are registered for the Manufacturing module, you will be unable to select the Item's Standard Cost check box. For more information, click the following article number to view the article in the Microsoft Knowledge Base: 930998 Error message when you perform the "Inventory Year-end Closing" routine in Microsoft Dynamics GP: "Update standard costs in the Standard Cost Rollup window"

When you have selected all the options that you want, click Process to start the year-end closing process. When the year is being closed, you will be unable to post, reconcile quantities, change valuation methods, or change decimal places for items.

7. Close the fiscal periods for the Inventory series (optional).

You can use the Fiscal Periods Setup window to close fiscal periods that are still open for the year. To open the Fiscal Periods Setup window, follow this step:

 In Microsoft Dynamics GP, point to Tools on the Microsoft Dynamics GP menu, point to Setup, point to Company, and then click Fiscal Periods.

This keeps transactions from accidentally being posted to the wrong period or year. Make sure that you have posted all transactions for the period and year for all modules before closing fiscal periods. If you later have to post transactions to a fiscal period you have already closed, you must return to the Fiscal Periods Setup window to reopen the period before you can post the transaction.

8. Make a final backup.

Make a final backup of the company data files and keep it in safe, permanent storage. This gives you a permanent record of the company's financial position at the time that you closed the year.

Inventory year-end closing tips

(5)

 You have the option to select the Discontinued Items check box, the Sold Receipts check box, or the Sold Lot Attributes check box. If you select these check boxes, all items, sold receipts, and sold lot attributes that have a zero balance will be removed during the year-end closing process.

 If you select the Update Item's Standard Cost check box, the standard cost for any items that have been assigned the FIFO periodic valuation method or the LIFO periodic valuation method will be adjusted automatically to reflect each item's current cost. The current cost is the amount that you most recently paid for the Item.

 There is no Year End Closing report for Inventory.

Inventory year-end frequently asked questions

Q1: How is the average cost of an item updated throughout the year and during the year-end closing process when you use the Average Perpetual valuation method?

A1: If you are using the Average Perpetual valuation method, all receipts for each item will be averaged to determine the average cost. The year-end closing process does not change the average cost. However, it will remove the purchase receipts that have been completely sold. The next time that a receipt is entered, the average cost will be revalued with the receipts that remain in the Inventory Purchase Receipts file.

Note In Microsoft Dynamics GP 9.0, enhancements were made to the calculation of the average cost. For more

information about the calculation of average costs, click the following article number to view the article in the Microsoft Knowledge Base:

923960 Enhancements made to the calculation of average cost in Microsoft Dynamics GP 9.0

Q2: Can the Inventory Year-End Closing window be used throughout the year to update the standard cost of items if you use the Periodic valuation method?

A2: We do not recommend this because the Beginning Quantity field is updated during the year-end closing process. This would make that field incorrect on reports such as the Turnover report. In addition, all summary sales history information would be incorrectly moved to the following year.

Q3: What is the effect of doing a late inventory year-end close in Great Plains? A3: Year-end closing for this module is optional.

In summary, the fields that are updated during year-end closing are mainly used in reports for quantity summaries. If these fields are not important, you may decide not to run year-end closing.

The inventory year-end close moves the summary history information from the current year to last year (as seen under Cards/Inventory/History), and zeroes out the current year information.

We recommended that you close the inventory module before you post sales and purchase transactions in the New Year because, if you do this, the item's history numbers will not be accurate (as seen under Cards/Inventory/History.) Also, the Inventory Turnover Report may not be accurate, because the item's beginning quantities for the year will not be accurate. To illustrate, say you sold 100 items in 2014. Then, you sold 10 additional items in 2015. You posted these 2015 inventory transactions. Before doing 2014 year-end close for inventory, you will have a quantity sold of 110 in 2015. After the 2014 year end close, you will have a value of 0 instead of 10 for your 2015 (Current Year) Sales Quantity and 110 for your 2014 (Last Year) Sales Quantity.

(6)

Year-end closing checklist Receivables Management

You can use this checklist for the end of the fiscal year and for the end of the calendar year.

Note Although Receivables Management is date sensitive, the following items are updated based on the closing of Receivables Management:

 The SmartList objects

 The Receivables Management summary reports

 The Amounts Since Last Close view in the Customer Summary window

Therefore, we recommend that you follow these steps so that the SmartList objects, the Receivables Management summary reports, and the Amounts Since Last Close view contain the correct information:

1. Post all the sales and receivables transactions for the year. 2. Make a pre-year-end closing backup.

3. Close the year.

4. Close the fiscal periods. (This step is optional.) 5. Close the tax year.

6. Make a post-year-end closing backup.

Step 1: Post all the sales and receivables transactions for the year

Post all the sales and receivables transactions for the year before you close the year. If you want to enter any sales and receivables transactions for a future period before you close the year, create a batch that contains the transactions. Next, save the batch. Then, post the batch after you close the year.

You must close the year because some areas of Microsoft Dynamics GP are not date sensitive. If you do not close the year after you enter all the 2014 transactions and before you enter all the 2015 transactions, these areas will contain incorrect information. However, if you have to change the information, you can change the information in the Amounts Since Last Close view in the Customer Summary window and in the Customer Finance Charge Summary window. The following areas are the areas of Microsoft Dynamics GP that are not date sensitive.

 The Amounts Since Last Close view in the Customer Summary window

To open the Amounts Since Last Close view in the Customer Summary window, follow these steps: 1. On the Cards menu, point to Sales, and then click Summary.

2. In the Customer Summary window, type a customer ID in the Customer ID box. 3. In the Summary View list, click Amounts Since Last Close.

 The Customer Finance Charge Summary window

To open the Customer Finance Charge Summary window, follow these steps: 1. On the Cards menu, point to Sales, and then click Summary.

2. In the Customer Summary window, type a customer ID in the Customer ID field. 3. Click Finance Charges.

 The SmartList objects

To view the SmartList columns that are affected, follow these steps:

1. In Microsoft Dynamics GP, click Columns on the Microsoft Dynamics GP menu, click SmartList, expand Sales, expand Customers, and then click Add.

2. Select the following items in the Available Columns list.

(7)

 Average Days to Pay - Year

 Finance Charges CYTD*

 Finance Charges LYR Calendar*

 High Balance LYR

 High Balance YTD

 Number of ADTP Documents - LYR

 Number of ADTP Documents - Year

 Number of NSF Checks YTD

 Total # FC LYR*

 Total # FC YTD*

 Total # Invoices LYR

 Total # Invoices YTD

 Total Amount of NSF Check YTD

 Total Bad Debt LYR

 Total Bad Debt YTD

 Total Cash Received LYR

 Total Cash Received YTD

 Total Discounts Available YTD

 Total Discounts Taken LYR

 Total Discounts Taken YTD

 Total Finance Charges LYR*

 Total Finance Charges YTD*

 Total Returns LYR

 Total Returns YTD

 Total Sales LYR

 Total Sales YTD

 Total Waived FC LYR*

 Total Waived FC YTD*

 Total Writeoffs LYR

 Total Writeoffs YTD

 Unpaid Finance Charges YTD*

 Write Offs LYR

 Write Offs YTD 3. Click OK.

4. Click OK.

Step 2: Make a pre-year-end closing backup

Create a backup before you close the year. Put the backup in safe, permanent storage. This backup makes sure that you have a permanent record of the company's financial position at the end of the year. You can restore information from this backup if you have to. For example, this backup would let you quickly recover if a power fluctuation or another problem occurred during the year-end close procedure.

To create a backup in Microsoft Dynamics GP, follow these steps:

1. In Microsoft Dynamics GP, point to Maintenance on the Microsoft Dynamics GP menu, and then click Backup. 2. In the Back Up Company window, select the company name in the Company Name list.

3. Change the path of the backup file if it is required, and then click OK.

(8)

Step 3: Close the year

1. In Microsoft Dynamics GP, point to Tools on the Microsoft Dynamics GP menu, point to Routines, point to Sales, and then click Year-End Close.

2. If you are closing both the fiscal year and the calendar year at the same time, click All. If you are closing only the calendar year, click Calendar. If you are closing only the fiscal year, click Fiscal.

3. Click to select the Print Report check box, and then click Close Year.

Note We recommend that you keep a paper copy of the year-end report together with the permanent year-end audit records.

Calendar year details

The calendar year-end process in Microsoft Dynamics GP clears the following fields in the Customer Summary window:

 Finance Charges CYTD

 Total # FC YTD

 Total Finance Charges YTD

 Total Waived FC YTD

 Unpaid Finance Charges YTD

The calendar year-end process updates the amounts in the following fields:

 *Finance Charges LYR Calendar

 *Total # FC LYR Fiscal year details

The fiscal year-end process in Microsoft Dynamics GP clears the following fields in the Customer Summary window:

 Average Days to Pay - Year

 High Balance YTD

 Number of ADTP Documents - Year

 Number of NSF Checks YTD

 Total # Invoices YTD

 Total Amount of NSF Check YTD

 Total Bad Debt YTD

 Total Cash Received YTD

 Total Discounts Available YTD

 Total Discounts Taken YTD

 Total Returns YTD

 Total Sales YTD

 Total Writeoffs YTD

 Write Offs YTD

The fiscal year-end process updates the amounts in the following fields:

 High Balance LYR

 Number of ADTP Documents - LYR

 Total # Invoices LYR

 Total Bad Debt LYR

 Total Cash Received LYR

 Total Discounts Taken LYR

 Total Returns LYR

 Total Sales LYR

 Total Writeoffs LYR

(9)

Step 4: Close the fiscal periods (This step is optional)

To prevent users from accidentally posting transactions to the wrong period or to the wrong year, use the Fiscal Periods Setup window to close all fiscal periods that are still open for the year. Before you close fiscal periods, verify that you have posted all the transactions for the period and for the year for all modules. If you must later post transactions to a fiscal period that you already closed, you can return to the Fiscal Periods Setup window to reopen the period so that you can post the transactions.

To close a fiscal period, follow these steps:

1. In Microsoft Dynamics GP, point to Tools on the Microsoft Dynamics GP menu, point to Setup, point to Company, and then click Fiscal Periods.

2. Click to select the Sales check box for the period that you want to close.

Step 5: Close the tax year

Note Follow these steps only after you complete the year-end closing procedures for all the sales and purchasing modules.

To close the tax year, follow these steps:

1. In Microsoft Dynamics GP, point to Tools on the Microsoft Dynamics GP menu, point to Routines, point to Company, and then click Tax Year-End Close.

2. Click to select the Close Year check box, and then click to select the Print Report check box. 3. Click Process.

Note We recommend that you keep a paper copy of the year-end report together with the permanent year-end audit records.

Step 6: Make a post-year-end closing backup

Create a backup after you close the year. Put the backup in safe, permanent storage. This backup makes sure that you have a permanent record of the company's financial position at the end of the year. You can restore information from this backup if you have to. For example, this backup would let you quickly recover if a power fluctuation or another problem occurred during the year-end close procedure.

1. In Microsoft Dynamics GP, point to Maintenance on the Microsoft Dynamics GP menu, and then click Backup. 2. In the Back Up Company window, click the company name in the Company Name list.

Note We recommend that you name this backup PostYearEndClosingBackup2014.

Year-to-date finance charges on customer statements for December and for January

Year-to-date finance charges are not automatically printed on customer statements for December and for January.

December statements

To add the year-to-date finance charges to the December statements, follow these steps:

(10)

2. In the Product list, click Microsoft Dynamics GP, and then click OK. 3. Click Reports.

4. Use the appropriate method:

 If you have not previously modified the statement form, click the statement form that you print in the Original Reports list, click Insert, and then click the statement form in the Modified Reports list.

 If you previously modified the statement form, click the statement form in the Modified Reports list. 5. Click Open.

6. In the Report Definition window, click Tables.

7. In the Report Table Relationships window, click RM Customer MSTR, and then click New. 8. In the Related Tables window, click Customer Master Summary, and then click OK. 9. Click Close.

10. Click Layout.

11. In the resource list in the Toolbox box, click Customer Master Summary.

12. In the field list, drag Finance Charges CYTD to the layout of the report. You can position this field in any section of the report.

13. On the File menu, click Microsoft Dynamics GP. When you are prompted to save the changes, click Save. 14. If you have not previously modified this report, you must grant security to the report. To do this, use the steps

below:

a. On the Microsoft Dynamics GP menu, point to Tools, point to Setup, point to Systems, and then click Alternate/Modified Forms and Reports.

b. In the ID box, enter the user ID.

c. In the Product list, click Microsoft Dynamics GP. d. In the Type list, click Reports.

e. Expand Sales, and then expand the node of the modified form. f. Click Microsoft Dynamics GP (Modified).

January statements

To add the year-to-date finance charges to the January statements, follow these steps: 1. Follow steps 1 through 11 in the "December statements" section.

2. In the field list, drag Finance Charges LYR Calendar to the layout of the report. You can position this field in any section of the report.

(11)

Payables Management master year-end closing checklist

Note Use this checklist if you are closing your fiscal year and your calendar year at the same time. 1. Post all transactions for the year.

2. Print the Aged Trial Balance with Options report. 3. Print the Vendor Period Analysis Report.

4. Install the Payroll year-end update (optional) 5. Make a backup that is named "Pre-1099 Edits." 6. Verify the 1099 information and edit it if it is required. 7. Print the 1099 statements.

8. Make a backup that is named "Pre Year-End." 9. Close the year.

10. Close the fiscal periods. 11. Close the tax year.

12. Make a backup that is named "Post Year-End."

Payables Management calendar year-end closing checklist

Note Although the Payables Management module is date-sensitive, the SmartList objects, the Payables Management summary reports, and the Amounts Since Last Close view of the Vendor Yearly Summary window are updated based on the closing of the Payables Management module. Therefore, we recommend that you follow these steps so that the SmartList objects, the Payables Management summary reports, and the Amounts Since Last Close view of the Vendor Yearly Summary window are correct.

1. Post all transactions for the calendar year. 2. Print the Aged Trial Balance with Options report. 3. Make a backup that is named "Pre-1099 Edits." 4. Verify the 1099 information and edit it if it is required. 5. Print the 1099 statements.

6. Make a backup that is named "Pre Year-End." 7. Close the calendar year.

8. Close the fiscal periods. 9. Close the tax year.

Payables Management fiscal year-end closing checklist

1. Post all transactions for the fiscal year.

2. Print the Vendor Period Analysis Report. 3. Make a backup that is named "Pre Year-End." 4. Close the fiscal year.

5. Close the fiscal periods.

Detailed information for each step in the year-end checklist

Step 1: Post all transactions for the year

(12)

The following areas of Microsoft Dynamics GP are not date-sensitive:

 The Amounts Since Last Close view of the Vendor Yearly Summary window

 SmartList objects

 Vendor Summary reports

These areas of Microsoft Dynamics GP will be incorrect if you do not close the payables year after you enter all 2014 transactions and before you enter all 2015 transactions. However, the Amounts Since Last Close view of the Vendor Yearly Summary window is editable. Therefore, you can update the information in the Amounts Since Last Close view of the Vendor Yearly Summary window if it is required.

To access the Amounts Since Last Close view of the Vendor Yearly Summary window, follow these steps: 1. On the Cards menu, point to Purchasing, and then click Summary.

2. In the Vendor Credit Summary window, type a vendor ID in the Vendor ID field, and then click Yearly. 3. In the Summary View list, click Amounts Since Last Close.

To view the SmartList columns that are affected, follow these steps:

1. Open SmartList. To do this in Microsoft Dynamics GP, click SmartList on the Microsoft Dynamics GP menu. 2. Expand the Purchasing node, and then click Vendors.

3. Click Columns. 4. Click Add.

5. Click the following fields in the Available Columns list.

Note The items flagged with an asterisk are affected by the calendar year-end close. All other items are affected by the fiscal year-end close.

 *1099 Amount YTD

 *1099 Amount LYR

 Amount Billed YTD

 Amount Billed LYR

 Amount Paid YTD

 Amount Paid LYR

 Average Days To Pay - Year

 Discount Available LYR

 Discount Available YTD

 Discount Lost LYR

 Discount Lost YTD

 Discount Taken LYR

 Discount Taken YTD

 Finance Charge LYR

 Finance Charge YTD

 Number of Finance Charges LYR

 Number of Finance Charges YTD

 Number of Invoice LYR

 Number of Invoice YTD

 Number of Paid Invoice YTD

 Returns LYR

 Returns YTD

 Trade Discounts Taken LYR

 Trade Discounts Taken YTD

 Withholding LYR

 Withholding YTD

(13)

7. Click OK.

To view the Vendor Summary reports, follow these steps:

1. On the Reports menu, point to Purchasing, and then click Analysis. 2. In the Reports list, click Calendar Year.

3. In the Options list, click an option, and then click Print.

Step 2: Print the Aged Trial Balance with Options report

We recommend that you print a paper copy of the Aged Trial Balance with Options report to keep with your year-end permanent financial records. To do this, follow these steps:

1. On the Reports menu, point to Purchasing, and then click Trial Balance. 2. In the Reports list, click Aged Trial Balance with Options.

Step 3: Print the Vendor Period Analysis report

We recommend that you print a paper copy of the Vendor Period Analysis report to keep with your year-end permanent financial records. To do this, follow these steps

1. On the Reports menu, point to Purchasing, and then click Analysis. 2. In the Reports list, click Period.

Step 4: Install the Payroll year-end update (optional)

If there are compliance changes for Payables Management, such as 1099 form changes, install the Payroll year-end update. If there are no changes or compliance issues for the tax year for Payables Management, you may skip this step. Review the changes that are included in the Payroll year-end update. To do this, visit the appropriate Microsoft Web site: Customers

https://mbs.microsoft.com/customersource/downloads/taxupdates Partners

https://mbs.microsoft.com/partnersource/support/selfsupport/taxupdates/

Step 5: Make a backup that is named "Pre-1099 Edits"

Create a backup, and then put the backup in safe, permanent storage. A backup gives you a permanent record of the company's financial position at the end of the year, and this backup can be restored later if it is required. A backup lets you recover data quickly if a power fluctuation or other problem occurs during the year-end closing procedure. To create a backup in Microsoft Dynamics GP, follow these steps:

1. In Microsoft Dynamics GP, point to Maintenance on the Microsoft Dynamics GP menu, and then click Backup. 2. In the Company Name list, click your company name.

Note We recommend that you name this backup "Pre-1099 Edits" to differentiate it from your other backups.

Step 6: Verify the 1099 information and edit it if it is required

To print the 1099 edit list, follow these steps:

1. In Microsoft Dynamics GP, point to Tools on the Microsoft Dynamics GP menu, point to Routines, point to Purchasing, and then click Print 1099.

2. Enter the Company Information and Address ID.

3. Click on the printer icon in the upper right corner to print the 1099 Edit List. Review for accuracy.

(14)

Dynamics GP 2013 and higher versons):

Method 1 - Edit the 1099 directly (Applies to all GP versions) (Note: The Reconcile utility for 1099 amounts would undo any edits you make.)

1. On the Cards menu, point to Purchasing, and then click 1099 Details. 2. In the Vendor ID list, click a vendor ID.

3. In the Tax Type list, select one of the following:

 Dividend

 Interest

 Miscellaneous

4. In the Display area, click Month or Year, and then type 2014 in the Year field. 5. In the Amount column, type the correct 1099 amount.

6. Click Save.

Method 2: Edit the 1099 directly (Applies to all GP versions) (Note: The Reconcile utility for 1099 Amounts would undo any edits you make.)

1. On the Cards menu, point to Purchasing, and then click Summary. 2. In the Vendor ID list, click a vendor ID, and then click Period. 3. In the Year field, type 2014.

4. In the Month/Period field, select the appropriate month or period.

5. Click the "1099 Details" blue expansion button that appears next to the 1099 Amount field. This 1099

Details window will open.

6. In the Amount column, type the correct 1099 amount for the respective box. 7. Press Save. Exist out of the remaining windows.

Method 3: (RECOMMENDED) Edit 1099 Transaction details (Applies to Microsoft Dynamics GP 2013 and higher versions)

1. Click on Transactions, point to Purchasing, and click on Edit 1099 Transaction Information. 2. Select the appropriate Vendor ID. (Only vendors set to be 1099able will be displayed in the window.) 3. You may restrict by Voucher Number, by Document Number or by Date, if desired.

4. Select if you want 1099 Debit Transactions, All Debit Transactions or All Credit Transactions.

5. The vendor's transaction detail will populate in the bottom of the window. For each transaction, you can edit the Tax Type, Box Number and Amount on open and historical transactions. Note: You may not enter a higher 1099 amount than the total amount of the document.

6. Click Process to have the changes made and the 1099 will be updated.

Method 4: VENDOR NOT MARKED CORRECTLY: (Applies to Microsoft Dynamics GP 2013 and higher versions) If you marked a vendor as 1099able and should not have, or you forgot to mark a vendor as 1099able at all, you can use the Update 1099 Information utility to change the 1099 status on the vendor and also to update the 1099 information. You can change a 1099 vendor to be non-1099 or vice versa.

(15)

2. Mark the bullet for Vendor and 1099 Transactions. 3. In the FROM and TO sections enter the following:

• To change a vendor to be 1099able: select Not a 1099 Vendor in the FROM section, and select the appropriate 1099 type of Dividend, Interest or Miscellaneous, and the appropriate 1099 Box number in the TO section. (Miscellaneous and Box 7 Nonemployee Compensation is the most common.)

• To change a vendor to not be 1099able: Select the current Tax Type and 1099 Box Number that is selected on the Vendor Maintenance Options window for the vendor in the FROM section, and select Not a 1099 Vendor in

the TO section.

*If Not a 1099 Vendor is not an option in the drop-down lists, then either you are not on a GP version higher than Microsoft Dynamics GP 2013, or you did not select Vendor and 1099 Transactions as instructed in step 2. 4. Use the Range restriction to restrict to the Vendor ID that you wish to change and click INSERT.

5. Click Process. The vendor status will be updated on the Vendor Maintenance Options window, and the 1099 information will be updated appropriately. You can use the 1099 details window (see Method 1) to verify.

Step 7: Print the 1099 statements

Note You can do this at any time.

To print the 1099 statements, follow these steps:

1. In Microsoft Dynamics GP, point to Tools on the Microsoft Dynamics GP menu, point to Routines, point to Purchasing, and then click Print 1099.

2. In the 1099 Year field, type 2014.

3. Each of your 1099 report types must be printed separately. In the Print 1099 window, click the options that you want in the1099 Type field and in the 1099 Box Number field, and then click Print.

The following table provides additional information about the fields on the 1099 form and where this information can be located in Microsoft Dynamics GP.

Field

window where data is

located

Payers name, street address, city,

state, and ZIP Code/Postal Code

Print 1099 window

Payers Federal Identification

number

Print 1099 window

Recipients name, address, and Zip

Code/Postal Code

(16)

Recipients identification number

Tax ID field of the Vendor

Maintenance Options

window

Amounts for boxes 1-9 on the

Dividend Form or 1-16 on the

Miscellaneous Form

1099 Amount field in the

Vendor Yearly Summary

window

Currently, Microsoft Dynamics GP does not handle magnetic media filing of state 1099s. The following Microsoft Dynamics Partner does offer compatible State W-2 and 1099 magnetic media products. For more information, contact:

Greenshades Accounting Software, Inc. 7800 Belfort Parkway Suite 220

Jacksonville, FL 32207

General: 1-800-209-9793 (Toll-Free) Sales: 1-800-209-9793x2 (Toll-Free) [email protected]

http://www.greenshades.com

Step 8: Make a backup that is named "Pre Year-End"

Create a backup, and then put the backup in safe, permanent storage. A backup gives you a permanent record of the company's financial position at the end of the year, and this backup can be restored later if it is required. A backup lets you recover data quickly if a power fluctuation or other problem occurs during the year-end closing procedure. To create a backup in Microsoft Dynamics GP, follow these steps:

Note We recommend that you name this backup "Pre Year-End" to differentiate it from your other backups.

Step 9: Close the year

To close the year, follow these steps:

1. In Microsoft Dynamics GP, point to Tools on the Microsoft Dynamics GP menu, point to Routines, point to Purchasing, and then click Year-End Close.

2. If you are closing both your fiscal and calendar year at the same time, click All. If you are just closing your calendar year, click Calendar. If you are just closing your fiscal year, click Fiscal.

3. Click to select the Print Report check box, and then click Close Year.

Note We recommend that you keep a paper copy of the year-end report together with your permanent year-end audit records.

To view the Vendor Yearly Summary window, follow these steps:

1. On the Cards menu, point to Purchasing, and then click Summary. 2. In the Vendor ID field, type a vendor ID to view, and then click Yearly. The calendar year details

The calendar year-end process in Microsoft Dynamics GP will clear the 1099 Amount Year to Date field and then transfer the amount to the 1099 Amount Last Year field for the Amounts Since Last Close view of the Vendor Yearly Summary window.

The fiscal year details

The fiscal year-end process in Microsoft Dynamics GP will clear the following fields:

 Amount Billed YTD

(17)

 Average Days To Pay - Year

 Discount Available YTD

 Discount Lost YTD

 Discount Taken YTD

 Finance Charge YTD

 Number of Finance Charges YTD

 Number of Invoice YTD

 Number of Paid Invoice YTD

 Returns YTD

 Trade Discounts Taken YTD

 Withholding YTD

 Write Offs YTD

The amounts in these fields will also be updated in the Amounts Since Last Close view of the Vendor Yearly Summary window:

 Amount Billed LYR

 Amount Paid LYR

 Discount Available LYR

 Discount Lost LYR

 Discount Taken LYR

 Finance Charge LYR

 Number of Finance Charges LYR

 Number of Invoice LYR

 Returns LYR

 Trade Discounts Taken LYR

 Withholding LYR

Step 10: Close the fiscal periods

You can use the Fiscal Periods Setup window to close any fiscal periods that are still open for the year. This prevents users from accidentally posting transactions to the wrong period or year. Verify that you have posted all transactions for the period and the year for all modules before closing fiscal periods. If you must later post transactions to a fiscal period that you have already closed, you can return to the Fiscal Periods Setup window to reopen the period before you can post a transaction.

To close a fiscal period, follow these steps:

1. Microsoft Dynamics GP, point to Tools on the Microsoft Dynamics GP menu, point to Setup, point to Company, and then click Fiscal Periods.

2. Click to select the Purchasing check box for the Period that you must close.

Step 11: Close the tax year

Note This procedure should only be completed after you have completed the year-end closing procedures for all sales and purchasing modules.

To close the tax year, follow these steps:

1. In Microsoft Dynamics GP, point to Tools on the Microsoft Dynamics GP menu, point to Routines, point to Company, and then click Tax Year-End Close.

2. Click to select the Close Year check box and the Print Report check box.

3. Click Process. When you are prompted to continue with the year-end close. Click Yes.

(18)

Step 12: Make a backup that is named "Post Year-End"

Create a backup, and then put the backup in safe, permanent storage. A backup gives you a permanent record of the company's financial position at the end of the year, and this backup can be restored later if it is required. A backup lets you recover data quickly if a power fluctuation or other problem occurs during the year-end closing procedure. To create a backup in Microsoft Dynamics GP, follow these steps:

Note We recommend that you name this backup "Post Year-End" to differentiate it from your other backups.

Frequently asked questions

Q1: Are inactive vendor records cleared during year-end closing? If not, how can inactive vendor records be removed?

A1: No, inactive vendor records are not automatically removed. To remove an inactive vendor record, the following conditions must be true:

 No current year 1099 amounts exist for the vendor

 The vendor has no documents in work or history.

To delete all inactive vendor records that fit these criteria, follow these steps:

1. In Microsoft Dynamics GP, point to Tools on the Microsoft Dynamics GP menu, point to Utilities, point to Purchasing, and then click Mass Vendor Delete.

2. In the Range list, click by Vendor Status. 3. In the From list, click Inactive.

4. In the To list, click Inactive. 5. Click Process.

Q2: What should I do if I must issue a check on January 1, 2015 but I am not ready to close 2014 yet?

A2: Print the checks, but do not post them until after you process your year-end closing. If you must post the checks immediately, change the Amount Paid fields in the Amounts Since Last Close view of the Vendor Yearly Summary window.

Fixed Assets calendar year-end closing checklist

Step 1: Perform all the year-end closing procedures for Payables Management in Microsoft Dynamics GP Step 2: Enter all the fixed asset transactions for the current fiscal year

Step 3: Depreciate all assets through the last day of the current fiscal year Step 4: Perform the GL Posting (GL Interface) process (This step is optional.)

Step 5: Run any year-end reports that you want to keep as part of the year-end financial records Step 6: Guarantee that the Fixed Assets calendar is built correctly (This step is optional.)

Step 7: Verify that the quarters are set up correctly for all the fiscal years Step 8: Create a backup

(19)

Step 1: Perform all the year-end closing procedures for Payables Management in Microsoft Dynamics GP

Close Payables Management first. This action guarantees that all the outstanding fixed asset transactions are capitalized. For more information about closing Payables Management, click the following article number to view the article in the Microsoft Knowledge Base:

875169 Year-end closing procedures for the Payables Management module in Microsoft Dynamics GP

Step 2: Enter all the fixed asset transactions for the current fiscal year

Post all the additions, the changes, the transfers, and the retirements for the current fiscal year. Note Transfers and undo retirement transactions should never be performed in a historical year.

Step 3: Depreciate all assets through the last day of the current fiscal year

1. In Microsoft Dynamics GP, point to Tools on the Microsoft Dynamics GP menu, point to Routines, point to Fixed Assets, and then click Depreciate.

2. In the Depreciation Target Date box, type the last date of the current fiscal year. 3. To insert all the fixed asset books, click All.

4. Click Depreciate.

NOTE: It is very important to depreciate all assets through the last day of the current FA Fiscal Year. If all assets are not depreciated through the last day of the current FA Fiscal Year prior to processing the year-end-close, depreciation amounts will be incorrect. Please see Q3 and A3 in the FAQ section below for more information.

Step 4: Perform the GL Posting (GL Interface) process (This step is optional.)

1. In Microsoft Dynamics GP, point to Tools on the Microsoft Dynamics GP menu, point to Routines, point to Fixed Assets, and then click GL Posting.

2. In the Beginning Period box, type 2014-012.

Note The 2013-012 placeholder represents period 12 of the fiscal year 2013. If you are not running on a calendar fiscal year, or if you have more than 12 periods, the period that you type is different.

3. In the Ending Period box, type 2014-012.

4. In the Transaction Date box, type the last date of the current fiscal year, or type the date when you need the posting to affect the general ledger.

5. Click Continue.

6. When you receive a message that the batch number is being created, click Continue. 7. In the Report Destination window, click to select the Printer check box, and then click OK.

Note You may want to keep this report as part of the year-end financial records.

Step 5: Run any year-end reports that you want to keep as part of the year-end financial records

The year-to-date depreciation amounts for previous fiscal years are not kept in Fixed Asset Management. Therefore, you must print any reports that contain this information before you close the year.

There are several reports available for fixed assets. We recommend that you print the following reports:

 Annual Activity

To print the Annual Activity report, point to Fixed Assets on the Reports menu, and then click Activity.

 Additions

(20)

 Retirements

To print the Retirements report, point to Fixed Assets on the Reports menu, click Transaction, and then click Retirements in the Reports list.

 Transfers

To print the Transfers report, point to Fixed Assets on the Reports menu, click Transaction, and then click Transfers in the Reports list.

 Depreciation Ledger

To print the Depreciation Ledger report, point to Fixed Assets on the Reports menu, click Depreciation, and then click Depreciation Ledger in the Reports list.

 Property Ledger

To print the Property Ledger report, point to Fixed Assets on the Reports menu, click Inventory, and then click Property Ledger in the Reports list.

 "Fixed Assets to General Ledger Reconciliation"

To print the "Fixed Assets to General Ledger Reconciliation" report, point to Fixed Assets on the Reports menu, click Activity, and then click Fixed Assets to General Ledger Reconciliation in the Reports list.

If you have more than one fixed asset book, we recommend that you also print the following reports:

 "Book to Book Reconciliation"

To print the "Book to Book Reconciliation" report, point to Fixed Assets on the Reports menu, and then click Comparison.

 "Book to Book YTD Depreciation Comparison"

To print the "Book to Book YTD Comparison" report, point to Fixed Assets on the Reports menu, click Comparison, and then click Book to Book YTD Depreciation Comparison in the Reports list.

Step 6: Guarantee that the Fixed Assets calendar is built correctly (This step is optional.)

1. In Microsoft Dynamics GP, point to Tools on the Microsoft Dynamics GP menu, point to Utilities, point to Fixed Assets, and then click Build Calendar.

2. Click Inquire, and then click Verify. When you are prompted to verify the periods, click OK. 3. In the Report Destination window, click Screen, and then click OK.

Step 7: Verify that the quarters are set up correctly for all the fiscal years

1. In Microsoft Dynamics GP, point to Tools on the Microsoft Dynamics GP menu, point to Setup, point to Fixed Assets, and then click Quarter.

2. Make sure that the following boxes are not empty:

 Start Date

 Mid Date

 End Date

Note These boxes must exist for each quarter. If any box is empty, type the appropriate date in that box.

Step 8: Create a backup

This backup should be stored off-site together with the rest of the year-end documentation. This backup gives you a permanent record of the company's financial position at the end of the year. Additionally, this backup can be restored later if it is required. Making a backup guarantees that you can quickly recover if a power fluctuation or other problem occurs during the year-end closing procedures.

(21)

2. In the Company Name list, click the company name.

3. Change the path of the backup if you must, and then click OK.

Step 9: Perform the fixed assets year-end closing routine

1. In Microsoft Dynamics GP, point to Tools on the Microsoft Dynamics GP menu, point to Routines, point to Fixed Assets, and then click Year End.

2. Verify that the fiscal year that is displayed for each book is the current fiscal year. (The current fiscal year is the year that you are closing.)

Note If the fiscal year that is displayed for a book is not the current fiscal year, see question 1 in the "Frequently asked questions (FAQ)" section.

3. Click a book that you want to close, and then click Insert. Repeat this step until all the books that you want to close have been inserted.

Note Microsoft Dynamics performs the following procedures during the year-end closing routine:

 In the Asset General Information window, the Quantity field is copied to the Begin Quantity field of the Expand Quantity window.

 In the Expand Last Maintenance window, the YTD Maintenance amount is cleared.

 In the Asset Book window, the YTD Depreciation Amount is cleared.

 The following procedures are performed:

 The Cost Basis field is copied to the Begin Year Cost field.

 The LTD Depreciation field is copied to the Begin Reserve field.

 The Salvage Value field is copied to the Begin Salvage field.

 In the Book Setup window, the Current Fiscal Year field is increased by one. Note A report is not generated during the fixed assets year-end closing routine.

Frequently asked questions (FAQ)

Q1: The fiscal year that is displayed for my book in the Asset Year End window is not 2014. I closed 2011 last year, and I have not yet closed 2014. What should I do?

A1: See the answer for question 4.

Q2: I have closed General Ledger in Microsoft Dynamics GP, and I now realize that I have not yet closed Fixed Asset Management. Can I perform the fixed assets year-end closing routine at this point?

A2: We recommend that you close General Ledger last, after all the subsidiary modules have been closed. However, Fixed Asset Management can be closed after General Ledger is closed. The GL Posting (GL Interface) process can be performed, and then the transaction or transactions can be posted to the closed year or to the historical year in the general ledger. For more information about the GL Posting (GL Interface) process, see step 4 in the "Year-end checklist" section. To post transactions to the historical year in the general ledger, make sure that the following options are selected in the General Ledger Setup window:

 Allow Posting to History

 Maintain History Accounts

 Maintain History Transactions Notes

 To access the General Ledger Setup window in Microsoft Dynamics GP, point to Tools on the Microsoft Dynamics GP Menu, point to Setup, point to Financial, and then click General Ledger.

(22)

Q3: I ran the year-end routine in Fixed Asset Management, and then I ran depreciation in the New Year. I see that the depreciation is highly overstated and that some assets have a negative number in the "Net Book Value" field. Why is the system calculating so much depreciation?

A3: This problem occurs if the following conditions are true:

 The year was closed.

 The assets were not depreciated through the last day of the fiscal year. Consider the following example:

 The fiscal year is a calendar year (January 1 through December 31).

 The assets were depreciated through December 28 when the year was closed.

In this example, depreciation will be incorrect the next time that depreciation is run. The system does not recalculate the yearly rate when the year-end closing routine is performed. Therefore, fixed assets take a full year of depreciation in the last few days that remain in the previous year (December 29 through December 31). The rate of depreciation is the yearly rate currently on each asset. Additionally, if there are assets that are near the end of their original life, the Net Book Value field may become negative.

There are two workarounds for this problem:

 Recommended workaround

Restore the data from a backup, run depreciation through the last day of the year, and then perform the year-end closing procedures.

 Alternative workaround Reset life on all the assets.

Note If amounts on the assets have ever been entered for the YTD Depreciation field or for the LTD Depreciation field, resetting life on the assets will change these amounts, and the result may be different. If you change the YTD

Depreciation field or the LTD Depreciation field by resetting life on the asset, you will cause inconsistencies between Fixed Asset Management and General Ledger. These inconsistencies must be explained.

Q4: Instead of completing the year-end routine for Fixed Asset Management, I manually changed the "Current Fiscal Year" field in the Book Setup window to the next year. Do I have to go back and run the year-end closing routine, or can I continue to process activity in Fixed Asset Management for the New Year?

A4: If no activity, such as additions, changes, transfers, retirements, or depreciation, has been run for the New Year, the Current Fiscal Year field in the Book Setup window can be changed back to the previous year, and then the year-end closing routine can be processed.

If any activity, such as additions, changes, transfers, retirements, or depreciation, has been run for the New Year, restore the data from a backup, and then continue with the year-end closing routine.

In either situation, the year-end closing routine must be run. If the year-end closing routine is not completed, the amount in the YTD Depreciation field will be overstated on any report that includes assets that were retired or that were fully depreciated in the previous year. If the year-end closing routine is not performed, the amounts in the YTD

Depreciation field will not be cleared. The amounts in the YTD Depreciation field will not be zeroed out. Therefore, these amounts will be incorrectly included in the reports for the New Year.

Payroll year-end checklist

(23)

1. Verify that you have installed the latest 2014 payroll tax update 2. Complete all pay runs for the current year

3. Complete all month-end, period-end, or quarter-end procedures for the current year 4. Make a backup of the original file

5. Install the Year-End Update 6. Create the Year-End file 7. Make a backup of the new file

8. Verify W-2 and 1099-R statement information

9. Print the W-2 statements and the W-3 Transmittal form 10. Print the 1099-R forms and the 1096 Transmittal form 11. (Optional:) Create the W-2 Electronic file

12. (Optional:) Archive inactive employee Human Resources information 13. Set up fiscal periods for 2015

14. (Optional:) Close fiscal periods for the payroll series for 2014 15. Install the payroll tax update for 2015

Alternative payroll year-end checklist

If you must process 2015 pay runs before you complete the 2014 year-end closing procedures, follow the steps in this alternative checklist:

1. Verify that you have installed the latest 2014 payroll tax update 2. Complete all pay runs for the current year

3. (Optional:) Complete all month-end, period-end, or quarter-end procedures for the current year 4. Make a backup of the original file

5. Install the Year-End Update 6. Create the year-end file 7. Make a backup of the new file

8. Verify W-2 and 1099-R statement information

9. (Optional:) Archive inactive employee Human Resources information 10. Set up Fiscal Periods for 2014

11. (Optional:) Close the fiscal periods for the Payroll series for 2014 12. Install the payroll tax update for 2015

13. Process the 2015 pay runs. The user date must occur in 2015. 14. Print the W-2 statements and the W-3 Transmittal form 15. Print the 1099-R forms and the 1096 Transmittal form 16. (Optional:) Create the W-2 Electronic file

Payroll module year-end details

Verify that you have installed the latest 2014 tax update

Download the latest tax table update and installation instructions for 2014 using one of the links below depending on if you are a partner or a customer:

Customer:

https://mbs.microsoft.com/customersource/northamerica/GP/downloads/tax-regulatory-updates

(24)

Complete all pay runs for the current year

(Optional:) Complete all monthly and quarterly payroll month-end, period-end, or quarter-end procedures

for the current year

For more information about period-end procedures for payroll, view Chapter 21, "Payroll Company Routines," in the Microsoft Dynamics GP user's manual. You can find this user manual in Microsoft Dynamics GP 2010 by clicking on the Help icon, click on Printable Manuals, click on Human Resources/Payroll and then click on Payroll (USA) with Direct Deposit. For Microsoft Dynamics GP 2013, use this link to obtain the printable manual for 'U.S.

Payroll': http://technet.microsoft.com/en-us/library/jj673202(v=gp.30).aspx

Make a backup of the original file

Create a backup, and then put this backup into safe, permanent storage. By creating a backup, you make sure that you have a permanent record of the company's financial position at the end of the year. You can restore the backup to quickly recover data if a power fluctuation or other problem occurs during the year-end closing procedure.

1. In Microsoft Dynamics GP, point to Maintenance on the Microsoft Dynamics GP menu, and then click Backup. Note The Back Up Company window opens.

2. In the Company Name list, click your company name.

Note We recommend that you name this backup 2014 Pre Year-End Update to differentiate it from your other backups.

Install the 2014 year-end update

To install the payroll year-end update, you must follow the steps in the Microsoft Dynamics GP U.S. 2014 Year-end

document. The install must be performed on each computer that has Microsoft Dynamics GP installed. When the update is released, install the update and download the 2014 Year End document from one of the following locations:

U.S. Payroll Year End Update for Microsoft Dynamics GP 2013 Partner:

https://mbs.microsoft.com/partnersource/northamerica/deployment/downloads/tax-regulatory-updates/usgpye2013 Customer:

https://mbs.microsoft.com/customersource/northamerica/GP/downloads/tax-regulatory-updates/usgpye2013 U.S. Payroll Year End Update for Microsoft Dynamics GP 2010

Partner:

https://mbs.microsoft.com/partnersource/northamerica/deployment/downloads/tax-regulatory-updates/usgpye2010 Customer:

https://mbs.microsoft.com/customersource/northamerica/GP/downloads/tax-regulatory-updates/usgpye2010

Create the year-end file

(25)

1. In Microsoft Dynamics GP, point to Tools on the Microsoft Dynamic GP menu, point to Routines, point to Payroll, and then click Year-End Closing.

2. In the Year field, type 2014, and then click Process.

Note When you process the 2014 Year End Wage file, make sure you have a '2014' tax update in place, so the correct FICA limit used. You can install the payroll tax update for 2015 any time after the year-end wage file for 2014 has been created, and before you process a new pay run for 2015.

Make a backup of the new file

Create a backup, and then put this backup into safe, permanent storage. By creating a backup, you make sure that you have a permanent record of the company's financial position at the end of the year. You can restore the backup to quickly recover data if a power fluctuation or other problem occurs during the year-end closing procedure.

Note We recommend that you name this backup 2014 Post Year-End File to differentiate it from your other backups.

Verify W-2 and 1099-R statement information

To view the W-2 information in Microsoft Dynamics GP, point to Tools on the Microsoft Dynamics GP menu, point to Routines, point to Payroll, and then click Edit W-2s.

To view the 1099-R information in Microsoft Dynamics GP, point to Tools on the Microsoft Dynamics GP menu, point to Routines, point to Payroll, and then click Edit 1099-Rs.

Note If you change the W-2 or the 1099-R information, we recommend that you make another backup.

Print the W-2 statements and the W-3 Transmittal form

To print the W-2 statements, follow these steps:

1. In Microsoft Dynamics GP, point to Tools on the Microsoft Dynamics GP menu, point to Routines, point to Payroll, and then click Print W-2s.

2. In the Print W-2 Forms window, specify the following settings:

 Print W-2s for: Normal Year-End

 Print: W-2 Forms

3. Click Print.

Note You can print employee W-2 statements as many times as you have to. To print the W-3 Transmittal Form, follow these steps:

1. In Microsoft Dynamics GP, point to Tools on the Microsoft Dynamics GP menu, point to Routines, point to Payroll, and then click Print W-3s.

2. In the Print W-2 Forms window, specify the following settings:

 Print W-2s for: Normal Year-End

 Print: W-3 Transmittal Form 3. Click Print.

Note You can print the W-3 Transmittal Form as many times as you have to.

Print the 1099-R forms and the 1096 Transmittal form

To print the 1099 forms, follow these steps:

(26)

2. In the Print 1099-R Forms window, click 1099-R Forms, and then click Print. Note You can print employee 1099-R forms as many times as you have to.

To print the 1096 Transmittal form, follow these steps:

1. In Microsoft Dynamics GP, point to Tools on the Microsoft Dynamics GP menu, point to Routines, point to Payroll, and then click Print 1099-Rs.

2. In the Print 1099-R Forms window, click 1096 Transmittal Form, and then click Print. Note You can print the 1096 Transmittal form as many times as you have to.

(Optional:) Create a W-2 Electronic File

To create a W-2 Electronic File, follow these steps:

1. In Microsoft Dynamics GP, point to Tools on the Microsoft Dynamics GP menu, point to Routines, point to Payroll, and then click W-2 Electronic File.

2. In the W-2 Electronic File window, click to select the check box that is next to each company that you want to include in your W-2 Electronic File.

3. In the User ID Number field, enter the user ID number (formerly called a PIN).

4. Click Submitter. The Electronic Filer Submitter Information window opens. Enter the submission information. 5. Change the file destination information in the File Name field if it is required.

6. Click Create File or Save to store the information to create the file later.

(Optional): Archive inactive employee Human Resources information

To archive inactive employee Human Resources information in Microsoft Dynamics GP, point to Tools on the Microsoft Dynamics GP menu, point to Utilities, point to Human Resources, and then click Archive Employee.

Set up fiscal periods for 2015

To set up fiscal periods for 2015, follow these steps:

1. In Microsoft Dynamics GP, point to Setup on the Microsoft Dynamics GP menu, point to Company, and then click Fiscal Periods.

2. In the Year field, type 2015, and then click Calculate.

Note You may want to close all periods except period 1 to prevent users from posting to future periods. 3. Click OK.

(Optional:) Close fiscal periods for the payroll series for 2014

You can use the Fiscal Periods Setup window to close all fiscal periods that are still open for the year. By closing fiscal periods, you prevent users from accidentally posting transactions to the wrong period or to the wrong year.

Before you close a fiscal period, verify that you have posted all transactions for the period and for the year for all modules. To later post a transaction to a fiscal period that you have closed, you must first reopen the period in the Fiscal Periods Setup window.

To close a fiscal period, follow these steps:

1. In Microsoft Dynamics GP, point to Tools on the Microsoft Dynamics GP menu, point to Setup, point to Company, and then click Fiscal Periods.

2. Click to select the Payroll check box for each Period that you close.

Install the payroll tax update for 2015

Note Do not install the payroll tax update for 2015 until the year-end file has been created for 2014. To install the payroll tax update for 2015, follow these steps:

1. In Microsoft Dynamics GP, point to Maintenance on the Microsoft Dynamics GP menu, point to U.S. Payroll Updates, and then click Check for Tax Updates.

(27)