• No results found

421 Bethune Dr N, Gravenhurst, ON

N/A
N/A
Protected

Academic year: 2021

Share "421 Bethune Dr N, Gravenhurst, ON"

Copied!
16
0
0

Loading.... (view fulltext now)

Full text

(1)

Main Building: Total Exterior Area Above Grade 892.08 m²

OPEN CONCEPT LIVING 6.51m x 6.94m 35.7 m² LAUNDRY 4PC BATH 1.84m x 2.48m 4.2 m² CL CLOSET DEN/OFFICE 3.32m x 2.32m 7.7 m² HALL DINING 3.46m x 3.29m 11.4 m² KITCHEN 3.46m x 3.65m 12.6 m² PRIMARY BEDROOM 4.46m x 3.78m 13.4 m² CLOSET FOYER FOYER F/P

(2)
(3)
(4)

APARTMENT A7/C3 - MAIN FLOOR Total Exterior Area 112.50 m²

Total Interior Area 98.74 m²

(5)

COMMERICAL UNITS C1 AND C2 Total Exterior Area 288.04 m²

Total Interior Area 268.78 m²

(6)

COMPANY STORAGE GARAGE Total Exterior Area 47.66 m²

Total Interior Area 38.97 m²

STORAGE/GARAGE/UTILITY 6.95m x 5.28m

34.6 m²

HYDRO SHUT-OFF UTILITY 2.42m x 0.83m

2.0 m²

(7)

APARTMENT 1 - UPPER FLOOR Total Exterior Area 78.01 m²

Total Interior Area 68.16 m²

(8)

APARTMENT 2 - UPPER FLOOR Total Exterior Area 78.63 m²

Total Interior Area 68.74 m²

(9)

APARTMENT 3 - UPPER FLOOR Total Exterior Area 59.55 m²

Total Interior Area 50.31 m²

(10)

APARTMENT 4 - UPPER FLOOR Total Exterior Area 70.83 m²

Total Interior Area 61.72 m²

(11)

APARTMENT 5 - UPPER FLOOR Total Exterior Area 79.53 m²

Total Interior Area 69.58 m²

(12)

APARTMENT 6 - UPPER FLOOR Total Exterior Area 77.33 m²

Total Interior Area 67.49 m²

(13)

Property Details

Room Measurements

Only major rooms are listed. Some listed rooms may be excluded from total interior floor area (e.g. garage). Room dimensions are largest length and width; parts of room may be smaller. Room area is not always equal to product of length and width.

Main Building

APARTMENT A7/C3 - MAIN FLOOR

4pc Bath: 1.84m x 2.48m | 4.2 m² Den/Office: 3.32m x 2.32m | 7.7 m² Dining: 3.46m x 3.29m | 11.4 m² Kitchen: 3.46m x 3.65m | 12.6 m²

Open Concept Living: 6.51m x 6.94m | 35.7 m² Primary Bedroom: 4.46m x 3.78m | 13.4 m²

COMMERICAL UNITS C1 AND C2

2pc Bath: 1.28m x 2.50m | 3.2 m² 2pc Bath: 1.29m x 2.50m | 3.2 m²

C1 Commercial Unit: 9.93m x 14.13m | 105.9 m² C2 Commercial Unit: 9.64m x 14.13m | 111.7 m² Loading Garage Door: 5.30m x 5.10m | 27.0 m² Storage Under Stairs: 1.37m x 6.37m | 8.7 m²

COMPANY STORAGE GARAGE

Hydro Shut-Off Utility: 0.83m x 2.42m | 2.0 m² Storage/Garage/Utility: 5.28m x 6.95m | 34.6 m²

APARTMENT 1 - UPPER FLOOR

4pc Bath: 1.50m x 2.20m | 3.3 m²

Floor Area Information

Floor areas include footprint area of interior walls. All displayed floor areas are rounded to two decimal places. Total area is computed before rounding and may not equal to sum of displayed floor areas.

Main Building

APARTMENT A7/C3 - MAIN FLOOR

Interior Area: 98.74 m² Perimeter Wall Length: 49.3 m Perimeter Wall Thickness: 28 cm Exterior Area: 112.50 m²

COMMERICAL UNITS C1 AND C2

Interior Area: 268.78 m² Perimeter Wall Length: 69.0 m Perimeter Wall Thickness: 28 cm Exterior Area: 288.04 m²

COMPANY STORAGE GARAGE

Interior Area: 38.97 m² Perimeter Wall Length: 31.1 m Perimeter Wall Thickness: 28 cm Exterior Area: 47.66 m²

APARTMENT 1 - UPPER FLOOR

(14)

Property Details

Room Measurements

APARTMENT 2 - UPPER FLOOR

4pc Bath: 1.48m x 2.21m | 3.3 m² Dining: 2.49m x 3.96m | 9.8 m² Kitchen: 2.37m x 2.41m | 5.6 m² Living: 3.85m x 4.75m | 16.1 m² Primary Bedroom: 3.60m x 3.63m | 12.9 m² Second Bedroom: 3.87m x 2.21m | 8.3 m²

APARTMENT 3 - UPPER FLOOR

4pc Bath: 1.56m x 2.26m | 3.4 m² Bedroom: 3.02m x 4.00m | 11.1 m² Kitchen: 3.01m x 2.01m | 5.9 m² Living: 5.03m x 4.42m | 18.3 m²

APARTMENT 4 - UPPER FLOOR

4pc Bath: 1.99m x 2.31m | 4.1 m² Bedroom: 3.14m x 4.07m | 11.5 m² Dining: 2.60m x 3.95m | 9.3 m² Kitchen: 3.00m x 1.82m | 5.4 m² Living: 3.63m x 4.69m | 15.7 m² Storage: 2.54m x 1.16m | 2.6 m²

APARTMENT 5 - UPPER FLOOR

4pc Bath: 1.49m x 2.19m | 3.3 m² Dining: 2.54m x 3.97m | 10.0 m²

Floor Area Information

APARTMENT 2 - UPPER FLOOR

Interior Area: 68.74 m² Perimeter Wall Length: 35.4 m Perimeter Wall Thickness: 28 cm Exterior Area: 78.63 m²

APARTMENT 3 - UPPER FLOOR

Interior Area: 50.31 m² Perimeter Wall Length: 33.1 m Perimeter Wall Thickness: 28 cm Exterior Area: 59.55 m²

APARTMENT 4 - UPPER FLOOR

Interior Area: 61.72 m² Perimeter Wall Length: 32.6 m Perimeter Wall Thickness: 28 cm Exterior Area: 70.83 m²

APARTMENT 5 - UPPER FLOOR

Interior Area: 69.58 m² Perimeter Wall Length: 35.7 m Perimeter Wall Thickness: 28 cm Exterior Area: 79.53 m²

(15)

Property Details

Room Measurements

APARTMENT 6 - UPPER FLOOR

4pc Bath: 1.52m x 2.19m | 3.3 m² Dining: 2.52m x 3.95m | 9.8 m² Kitchen: 2.36m x 2.43m | 5.6 m² Living: 3.83m x 5.05m | 16.5 m² Primary Bedroom: 3.51m x 3.54m | 12.4 m² Second Bedroom: 3.88m x 2.19m | 8.2 m²

Floor Area Information

Total Above Grade Floor Area Main Building Interior: 792.51 m²

(16)

iGUIDE Method of Measurement

Definitions

Interior Areais a per floor calculation, made by measuring to the inside surface of the exterior walls.

Excluded Area is a sum of interior areas of all rooms (measured to the inside surface of room walls) that are excluded from the Interior Area for

a floor. Prescribed area exclusions can vary from region to region. Examples of exclusions are spaces open to below, garages, cold cellars, crawl and reduced height spaces, non-enclosed open spaces, such as decks and balconies.

The footprint of all interior walls and staircases is typically included in the reported Interior Area for a floor. The iGUIDE PDF floor plans use color to highlight all included areas. All excluded areas are shown white.

Exterior Area is a per floor calculation, made by measuring to the outside surface of the exterior walls, see below for calculation details.

Gradeis the ground level at the perimeter of the exterior finished surface of a house. A floor is considered to be above grade if its floor level is

everywhere above grade.

Total Interior Area is the sum of all Interior Areas. Total Excluded Area is the sum of all Excluded Areas. Total Exterior Area is the sum of all Exterior Areas.

Unfinished Area is the sum of interior areas of all unfinished rooms (measured to the inside surface of room walls). Finished Area is Exterior Area minus Unfinished Area. Finished Area includes the footprint of interior and exterior walls.

iGUIDE Exterior Area Calculation

Exterior Area = [Perimeter Wall Thickness] x [Perimeter Wall Length] + [Interior Area] Notes

References

Related documents

Excluded Area is a sum of interior areas of all rooms (measured to the inside surface of room walls) that are excluded from the Interior Area for a floor.. Prescribed area

Excluded Area is a sum of interior areas of all rooms (measured to the inside surface of room walls) that are excluded from the Interior Area for a floor.. Prescribed area

Excluded Area is a sum of interior areas of all rooms (measured to the inside surface of room walls) that are excluded from the Interior Area for a floor.. Prescribed area

Excluded Area is a sum of interior areas of all rooms (measured to the inside surface of room walls) that are excluded from the Interior Area for a floor.. Prescribed area

Excluded Area is a sum of interior areas of all rooms (measured to the inside surface of room walls) that are excluded from the Interior Area for a floor.. Prescribed area

Excluded Area is a sum of interior areas of all rooms (measured to the inside surface of room walls) that are excluded from the Interior Area for a floor.. Prescribed area

Excluded Area is a sum of interior areas of all rooms (measured to the inside surface of room walls) that are excluded from the Interior Area for a floor.. Prescribed area

Excluded Area is a sum of interior areas of all rooms (measured to the inside surface of room walls) that are excluded from the Interior Area for a floor.. Prescribed area