• No results found

Process Parameters Optimization of an Aluminium Alloy with Pulsed Gas Tungsten Arc Welding (GTAW) Using Gas Mixtures

N/A
N/A
Protected

Academic year: 2020

Share "Process Parameters Optimization of an Aluminium Alloy with Pulsed Gas Tungsten Arc Welding (GTAW) Using Gas Mixtures"

Copied!
7
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Table 2. Process Parameters and their limiting Values.
Table 5. Experimental results for the mechanical properties.
Figure 3. (a) 03, (b) 08, (c) 11, microstructures of HAZ and weld zone at 100X and (d) 03, (e) 08, (f) 11, microstructures of weld zone at 200X
Figure 4. Response graph of mechanical properties.

References

Related documents

In the present study, we tested a panel of bacterial strains including both reference ATCC strains and MDR phenotypes expressing active efflux pumps [4, 5, 22].. In fact,

Gametic phase disequilibrium: The gametic phase disequilibrium parameter (also called linkage disequilibrium. epistatic disequilibrium, gametic phase un- balance,

The hydroxyl radical-aided thermal pretreatment in this study integrated two steps of previous pretreatment to form a simple technology and used a high temperature of hot

Recently, large and moderate deviations results have been proved for the recur- sive density estimators defined by stochastic approximation method in [ 37 ] in the non spatial case,

Dosimetric comparison of postoperative whole pelvic radiotherapy for endometrial cancer using three-dimensional conformal radiotherapy, intensity-modulated radio- therapy,

For example, one English young woman wrote in relation to statement 34 (Most young people discuss fully all aspects of their sexual relationship.): “They are too afraid to talk

This paper has presented the results of a pilot study comparing the physi- ological response of eye movement of architecture students when looking at different digital modalities