FIJI JF; DRG; MF. Service Schedule & Consumables SA / SA / SA Service & Maintenance Schedule

(1)

Service & Maintenance Schedule

FIJI JF - FAME in Jet Fuel (SA5000-2) IP 583; ASTM D7797

Every Test 6 Monthly 12 Monthly

Replace the Filter Cartridge, Filter and Sample In Beaker

• Verify instrument operation using one verification solution:

• SA5021-0 Verification Material 100mg-kg, 100ml

• Verify instrument operation using MULTIPLE verification solutions:

• FIJI DRG - FAME in Distillate & Residuals (SA5100-0) ASTM D7963

Replace the Filter Cartridge, Filter and Sample In Beaker

• Verify instrument operation using one verification solution:

• Verify instrument operation using MULTIPLE verification solutions:

• FIJI MF - FAME in Multifuels (SA5200-0) IP 583; ASTM D7797; ASTM D7963

Replace the Filter Cartridge, Filter and Sample In Beaker

• Verify instrument operation using ONE verification solution:

• Verify instrument operation using MULTIPLE verification solutions:

• SA5020-0 Verification Material 30mg-kg, 100ml • SA5021-0 Verification Material 100mg-kg, 100ml • SA5122-0 Verification Material 400mg-kg, 100ml

• NOTE: Instruments should be calibrated in the event of a verification failure.

FIJI JF; DRG; MF

Service Schedule & Consumables

(2)

CONSUMABLES

SA5000-2

_{FIJI JF}

SA5100-0

_{FIJI DRG}

SA5200-0

_{FIJI MF}

SA5028-0 FIJI DRG Extender Diluent, 500ml

SA5029-0 FIJI DRG Extender Diluent, 5L

SA5030-0 FIJI DRG Extender Diluent 20L

•

• SA5003-0 FIJI Box Low Lint Wipes

(Box of 280)

•

• SA5004-050 FIJI Beakers 50ml

(50 off)

SA5004-100 FIJI Beakers 50ml

(100 off)

•

• SA5005-100 FIJI IP 583 Cartridges

(100 off)

Cartridge and Filters included

•

• SA5105-100 FIJI ASTM D7963 Cartridges

(100 off)

Cartridge and Filters included

•

• NOTE: For Jet Fuel testing the FIJI IP 583 Cartridges should be used and for Distillate & Residual testing the FIJI ASTM D7963

Cartridges should be used.

Spares & Consumables

START UP KITS

SA5000-2

_{FIJI JF}

SA5100-0

_{FIJI DRG}

SA5200-0

_{FIJI MF}

SA5001-0 FIJI IP 583 Starter Kit

• 1 box of Low Lint Wipes (280 wipes)

• 50ml Beakers (10) • Cartridges (10) • Filters (10) • Verification Material 30 mg-kg (1) • Verification Material 100 mg-kg (1)

• SA5101-0 FIJI ASTM D7963 Starter Kit

• 50ml Beakers (10) • Cartridges (10) • Filters (10) • Verification Material 100 mg-kg (1) • Verification Material 900 mg-kg (1)

• SA5201-0 FIJI IP 583-ASTM D7963 Starter Kit

• 50ml Beakers (10)

• Jet Fuel Cartridges (10)

• Distillate & Residual Cartridges (10)

• Filters (10)

• Verification Material 30 mg-kg(1)

• Verification Material 100 mg-kg (1)

• Verification Material 900 mg-kg(1)

•

(3)

CALIBRATION

SA5000-2

_{FIJI JF}

SA5100-0

_{FIJI DRG}

SA5200-0

_{FIJI MF}

SA5025-0 FIJI IP 583 Calibration Material Set

• 30, 75 , 100, 125, 150 mg-kg • • • • • •

• SA5125-0 FIJI IP 583-ASTM D7963 Calibration Material Set

• 30, 75 , 100, 125, 150, 300, 500, 800, 1000 mg-kg

•

• REPAIRS & MAINTENANCE

SA5000-2

FIJI JF

SA5100-0

FIJI DRG

SA5200-0

FIJI MF

SA5000-203 Pump and Bracket Sub Assembly

•

• SA5000-204 Pump PCB

• Stepper Control Board • M3 Spring Washers • M3 x 6 Pozi Screws • • •

•

• SA5000-206 Flowcell & Manifold

• Flowcell (1)

• Manifold (1)

• Quick Connect Fittings (4)

• Fittings •

•

• SA5000-207 Manifold Block with Valves

• Manifold (1)

• Quick Connect Fittings (4)

• M5 Dowty (1)

• M5 x 6 Pozi Screw (1)

• M3 Dowty (1)

• M3 x 6 Pozi Screw (1)

• Solenoid Valve (3)

• Flow Cell Manifold Bracket (1)

• Grommets (4) • M4 x 50 Pozi Screws (2) • M4 Plain Washer (5) • M4 x 8 Pozi Screws (3) • M4 Spring Washers (3)

•

• SPARES

SA5000-2

_{FIJI JF}

SA5100-0

_{FIJI DRG}

SA5200-0

_{FIJI MF}

SA5000-205 Fuse

•

• SA5000-201 Sample Probe Assembly

(4)

ENGINEERING SERVICE KIT

SA5000-2

_{FIJI JF}

SA5100-0

_{FIJI DRG}

SA5200-0

_{FIJI MF}

SA5016-0 FIJI IP 583 Engineering Service Kit

• Sample Inlet / Outlet Tubes

• Replacement Tubing

• Button Housing (Ring Seal, Dowty Seal M5, Quick Connect Fitting)

• Manifold (Solenoid Valve, Dowty Seal M5, Dowty Seal M3, Dowty Centre & Quick Connect Fitting)

• Verification Fluid 30 mg-kg • Verification Fluid 100 mg-kg •

• SA5116-0 FIJI IP 583-ASTM D7963 Engineering Service Kit

• Sample Inlet / Outlet Tubes • Replacement Tubing

• Button Housing (Ring Seal, Dowty Seal M5, Quick Connect Fitting)

• Manifold (Solenoid Valve, Dowty Seal M5, Dowty Seal M3, Dowty Centre & Quick Connect Fitting) • Verification Fluid 30 mg-kg • Verification Fluid 100 mg-kg • Verification Fluid 400 mg-kg • Verification Fluid 900 mg-kg

•

• NOTE: Engineering Service Kits should only be used by trained authorised engineers.

REPAIRS & MAINTENANCE

SA5000-2

_{FIJI JF}

SA5100-0

_{FIJI DRG}

SA5200-0

_{FIJI MF}

SA5000-208 Solenoid Valves

(3)

•

• SA5000-209 Monitor

• SA5100-209 Monitor

• SA5200-209 Monitor

• SA5000-210 Main PCB

•

(5)

ANNUAL SERVICE

SA5000-2

_{FIJI JF}

SA5100-0

_{FIJI DRG}

SA5200-0

_{FIJI MF}

SA5015-0 FIJI IP 583 Annual Service Kit

• Sample Inlet Assembly

• Sample Outlet Assembly • Ring Seal

• Verification Material 30 mg-kg • Verification Material 100 mg-kg • Service Instructions

• SA5115-0 FIJI IP 583-ASTM D7963 Annual Service Kit

• Sample Inlet Assembly • Sample Outlet Assembly • Ring Seal • Verification Material 30 mg-kg • Verification Material 100 mg-kg • Verification Material 400 mg-kg • Verification Material 900 mg-kg • Service Instructions

•

• NOTE: Both Annual Service Kits can be used by either trained engineers or end users.

UPGRADE KITS

SA5000-2

_{FIJI JF}

SA5100-0

_{FIJI DRG}

SA5200-0

_{FIJI MF}

SA5150-0 FIJI Distillate & Residual Upgrade ASTM D7963

• USB Keyboard (1)

• Upgrade software (memory stick)

• FIJI ASTM D7963 Calibration Set: 30, 75 , 100, 125, 150, 300, 500, 800, 1000 mg-kg • Verification Material 30 mg-kg

• Verification Material 100 mg-kg • Upgrade Instructions

• SA5050-0 FIJI Jet Fuel Upgrade for IP 583 & ASTM D7797

• USB Keyboard (1)

• Upgrade software (memory stick)

• FIJI ASTM D7963 Calibration Set: 30, 75 , 100, 125, 150, 300, 500, 800, 1000 mg-kg • Verification Material 30 mg-kg

• Verification Material 100 mg-kg • Upgrade Instructions