2006 JUDY SERVICE GUIDE

Use large internal snap ring pliers to remove the rebound damper seal head retaining ring (located inside the bottom of the drive side upper tube)... OPTIONAL - COMPRESSION

Firmly pull down on the damper shaft and remove the rebound damper and seal head assembly from the upper tube.. Slide the seal head off the

Remove rebound damper seal head retain- ing ring (located inside the bottom of the right upper tube), using external snap ring pliers.. Pull down and remove the rebound damper

Using a long cylindrical rod, push the air assist plunger up through the upper tube until the lower spring guide protrudes from the crown (Air Assist Plunger Assembly

Use large internal snap ring pliers to remove the rebound damper seal head snap ring. Firmly pull on the rebound shaft and remove the

Use large internal snap ring pliers to remove the rebound damper seal head retaining ring (located inside the bottom of the drive side upper tube).. Pull down and remove the

Pull down on the damper shaft to remove the rebound damper and seal head assembly from the upper tube.. Slide the seal head off the

Slide the upper tubes into the lower leg until you feel the spring and damper shafts make contact with the inside of the legs, then pull the upper tubes back out a few