• No results found

Sweep algorithm for solving optimal control problem with multi point boundary conditions

N/A
N/A
Protected

Academic year: 2020

Share "Sweep algorithm for solving optimal control problem with multi point boundary conditions"

Copied!
13
0
0

Loading.... (view fulltext now)

Full text

Loading

References

Related documents

As many other clustering protocols, our protocol divides the operation of cluster into rounds. Each round contains two phases, which are called cluster setup phase and

These include (i) that only Ermolov considered the interrelationship of the Asiatic and Balkan theatres (in fact Nicholas and Diebitsch did also, though, in reality, there could

Now, the mix proportions for UHPC are considered using different proportions for marble dust and also the typical composition of it.  Mixing of dry materials like

At high idling conditions, brake specific energy consumption for ball nutt biodiesel blends increased compare to diesel fuel. However, at the highest idling speed

Naturally, the best hub returned by the inference figuring could be either the hub that has the most imperative prohibitive disillusionment probability given an

Wallace tree multiplier consists of three step process, in the first step, the bit product terms are formed after the multiplication of the bits of multiplicand and

conflict over EU membership on individual utility in Denmark, Finland, Norway and. Sweden. Secondly, in developing a model for understanding the effect of this

The signing of the Afiican Charter in 1963, with its implicit endorsement of the territorial status quo, and its explicit denunciation of subversion and