TEST CERTIFICATE SATRA TECHNOLOGY CENTRE

(1)

(2)

(3)

(4)

150 9001 EAU VER1TA "ficatioa a member of

SATRA

TECHNOLOGY CENTRE ISO 141101 BUREAU VERIAS tertitiman ,... ales ishra

(Senior Technologist) _{Chief Technologist & Head Physical Laboratory}Shailendra Saxena INTERNATIONAL TESTING CENTRE DAR Accreditation for DIN EN ISO/IEC 17025: 2000 by DAP GmbH

Accredited by BIS India

Approved by DGS&D, DGAQA, RITES, Air Headquarters, General Motors

GERMANY ACCREDITED

TEST CERTIFICATE

Supplier : CPCB Contact : Mr. V.P.Yadav Material : Leather Code : Goat

Job start date :09.04.11 Laboratory Environment Temperature 23 +/-2°C Relative Humidity 50+/-5%

The sample was conditioned for 48 hours

Tensile Strength (kg/cm 2) (based on SATRA TM-43)

Value 14.5N/mm2

%Elongation (based on SATRA TM-43)

Value _{45 %}

Job No. : 2KX104066-B

Date of Entry : 07.04.2011

Page : 1/1

Colour : Brown

Job completion date : 18.04.11

Tear Strength (based on SATRA TM-162)

Value _{28 N}

Water Vapour permeability _{(based on SATRA TM-172)}

Value _1.70_{mg/cm2 h}

Water Vapour coefficient (based on IS15298Part-2)

Value _{17.72 mg/cm2}

Heat Resistance Test (based on SATRA TM-49)

Observation _{No surface damage was observed at 100 degree till one minute} Grain crack Test (based on SATRA TM-24)

Value _7.52mm

Water penetration Test (based on SATRA TM-171)

Value _{5 min}

This report is for technical information of the client only. Not for advertisement, promotion, publicity litigation or legal purpose.

This institute shall be indemnified against any dispute arising out of issue of this report. Sample not drawn by FDDI and the test results relate only to the material tested.

The report must not be reproduced except in full without approval of FDDI.

FOOTWEAR DESIGN & DEVELOPMENT INSTITUTE

MINISTRY OF COMMERCE & INDUSTRY, GOVERNMENT OF INDIA

A-10/A, SECTOR-24, NOtDA-201301, DISTT. GAUTAM BUDHA NAGAR (U.P.) INDIA

Ph. : +91-120-4500129, 4500138 (Physical Lab), 4500113, 4500125 (Chemical Lab), 2412558 (Dir. Technical) EPABX : +91-120-4500100 Fax : +91-120-2412556, 2411301 Website : www.fddiindia.com

(5)

a member of

SATRA

IN

TECHNOLOGYCENTRE ISO 9001 BEAU VERITAS ficabou BUREAU VERITAS 'renifitation

INTERNATIONAL TESTING CENTRE

DAR Accreditation for DIN EN ISO/IEC 17025: 2000 by DAP GmbH Accredited by HIS India

Approved by DGS&D, DGAQA, RITES, Air Headquarters, General Motors

NEE=233321=11111

TEST CERTIFICATE

Supplier : CPCB Job No. : 210(104066-C

Contact : Mr. V.P.Yadav Date of Entry : 07.04.2011

Material : Leather Page : 1/1

Code : Sheep Colour : Brown

Job start date :09.04.11 Job completion date : 18.04.11

Laboratory Environment Temperature 23 +/-2°C Relative Humidity 50+/-5%

Tensile Strength (kg/cm2) (based on SATRA TM-43)

Value 14N/mm2

Value 49 %

Value 30 N

Water Vapour permeability (based on SATRA TM-172)

Value 6.56 mg/cm' h

Value 48.52 mg/cm2

Heat Resistance Test (based on SATRA TM-49)

Observation No surface damage was observed at 100 degree till one minute Grain crack Test (based on SATRA TM-24)

Value 8.0mm

Water penetration Test (based on SATRA TM-171)

Value 4 min

Raj ishra Shailendra Saxena

(Senior Technologist) Chief Technologist & Head Physical Laboratory

I. This report is for technical information of the client only. Not for advertisement, promotion, publicity litigation or legal purpose.

This institute shall be indemnified against any dispute arising out of issue of this report. Sample not drawn by FDDI and the test results relate only to the material tested. 4. The report must not be reproduced except in full without approval of FDDI.

MINISTRY OF COMMERCE & INDUSTRY, GOVERNMENT OF INDIA

A-10/A, SECTOR-24, NOIDA-201301, DISTT. GAUTAM BUDHA NAGAR (U.P.) INDIA

(6)

a member of

SATRA

TECHNOLOGY CENTRE ISO t4COT BURERVVERITAS Cenificanou • DE .-s.she .1 • DAP-FL-35E9. OC Value (Senior Mishra , (Senior Technologist)

INTERNATIONAL TESTING CENTRE DAR Accreditation for DIN EN ISO/IEC 17025: 2000 by DAP GmbH

Accredited by BIS India

Approved by D(;S&D, DGAQA, RITES, Air Headquarters, General Motors

GERMANY ACCREDITED

TEST CERTIFICATE

Supplier : CPCB Job No. : 2KX104066-A

Contact : Mr. V.P.Yadav Date of Entry : 07.04.2011

Material : Leather Page : 1/1

Code : Buff Colour : Black

Job start date :09.04.11 Job completion date : 18.04.11

Laboratory Environment Temperature 23 +/-2°C Relative Humidity 50+/-5%

Tensile Strength (kg/cm 2) (based on SATRA TM-43)

Value 15.9N/mm2

Value 42.42 %

Value 197 N

Water Vapour permeability (based on SATRA TM-172)

Value 2.87 mg/cm2 h

Value 20.80 mg/cm2

Heat Resistance Test (based on SATRA TM-49)

Observation No surface damage was observed at 100 degree till one minute Grain crack Test (based on SATRA TM-24)

Value 7.32mm

Water penetration Test (based on SATRA TM-171)

14min

Shailendra Saxena Chief Technologist & Head Physical Laboratory

I. This report is for technical information of the client only. Not for advertisement, promotion, publicity litigation or legal purpose.

This institute shall be indemnified against any dispute arising out of issue of this report. Sample not drawn by FDDI and the test results relate only to the material tested. 4. The report must not be reproduced except in full without approval of FDDI.

MINISTRY OF COMMERCE & INDUSTRY, GOVERNMENT OF INDIA A-10/A, SECTOR-24, NOIDA-201301, DISTT. GAUTAM BUDHA NAGAR (U.P.) INDIA